Hydrogen‐bonding interaction between poly(ε‐caprolactone) and low‐molecular‐weight amino compounds

The specific interactions between several low‐molecular‐weight diamino compounds and poly(ε‐caprolactone) (PCL) have been investigated by FT‐IR. It was found that PCL and 3,3′‐diaminodiphenylmethane (3,3′‐DADPM) interact through strong intermolecular hydrogen bonds in the blend. Thermal and mechanical properties of PCL/3,3′‐DADPM blends were investigated by DSC and tensile measurements, respectively. The glass transition temperature of the blend increases while both the melting point and the elongation‐at‐break of the blend decrease with the increase of 3,3′‐DADPM content. Besides 3,3′‐DADPM, several other low‐molecular‐weight compounds containing two amino groups, such as o‐phenylenediamine or 1,6‐diaminohexane, were also added into PCL and the corresponding blend systems were investigated by FT‐IR and DSC. The effect of the chemical structure of the additives on the properties of PCL is discussed. © 2001 Society of Chemical Industry     

Miscibility and phase structure of binary blends of poly(L‐lactide) and poly(vinyl alcohol)

Blend films of poly(L ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA) were obtained by evaporation of hexafluoroisopropanol solutions of both components. The component interaction, crystallization behavior, and miscibility of these blends were studied by solid‐state NMR and other conventional methods, such as Fourier transform infrared (FTIR) spectra, differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WAXD). The existence of two series of isolated and constant glass‐transition temperatures (T_g's) independent of the blend composition indicates that PLLA and PVA are immiscible in the amorphous region. However, the DSC data still demonstrates that some degree of compatibility related to blend composition exists in both PLLA/atactic‐PVA (a‐PVA) and PLLA/syndiotactic‐PVA (s‐PVA) blend systems. Furthermore, the formation of interpolymer hydrogen bonding in the amorphous region, which is regarded as the driving force leading to some degree of component compatibility in these immiscible systems, is confirmed by FTIR and further analyzed by ¹³C solid‐state NMR analyses, especially for the blends with low PLLA contents. Although the crystallization kinetics of one component (especially PVA) were affected by another component, WAXD measurement shows that these blends still possess two isolated crystalline PLLA and PVA phases other than the so‐called cocrystalline phase. ¹³C solid‐state NMR analysis excludes the interpolymer hydrogen bonding in the crystalline region. The mechanical properties (tensile strength and elongation at break) of blend films are consistent with the immiscible but somewhat compatible nature of these blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 762–772, 2001     

Research and Development of the Coprecipitation Process for Lanthanum Germanate Oxyapatite

Although lanthanum germanate oxyapatite (La–Ge–O) has shown good potential for use as a solid electrolyte in energy storage applications, its synthesis has been challenging by either solid‐ or solution‐state methods. In this study, a new synthesis of La–Ge–O was developed through a coprecipitation technique, in which a highly concentrated homogeneous aqueous solution of La and Ge was prepared from aqueous ammonium germanate and lanthanum nitrate solutions with the addition of dilute nitric acid. Several precipitates were formed by pH manipulation, including an amorphous material obtained at pH > 3. Compared to the individual precipitation behaviors of the parent compounds, the amorphous precipitate was formed only from the aqueous two‐component mixture, and appeared to contain both metals. This material was transformed into crystalline mixtures upon heating at 1273 K. The crystalline phases were La₂Ge₃O₉ and hexagonal‐type GeO₂ when the precipitate was formed below pH 8, and the La–Ge–O and La₂Ge₂O₇ phases when the precipitate was formed around pH 8. Product formation from the coprecipitate was discussed based on X‐ray diffraction and thermal analyses. The improved availability of La–Ge–O will allow more extensive investigations of its useful properties.     

Effects of Gd Substitution on Sintering and Optical Properties of Highly Transparent (Y0.95−xGdxEu0.05)2O3 Ceramics

Highly transparent (Y_0.95?xGd_xEu_0.05)₂O₃ (x = 0.15–0.55) ceramics have been fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h with the in‐line transmittances of 73.6%–79.5% at the Eu³⁺ emission wavelength of 613 nm (~91.9%–99.3% of the theoretical transmittance of Y_1.34Gd_0.6Eu_0.06O₃ single crystal), whereas the x = 0.65 ceramic undergoes a phase transformation at 1650°C and has a transparency of 53.4% at the lower sintering temperature of 1625°C. The effects of Gd³⁺ substitution for Y³⁺ on the particle characteristics, sintering kinetics, and optical performances of the materials were systematically studied. The results show that (1) calcining the layered rare‐earth hydroxide precursors of the ternary Y–Gd–Eu system yielded rounded oxide particles with greatly reduced hard agglomeration and the particle/crystallite size slightly decreases along with increasing Gd³⁺ incorporation; (2) in the temperature range 1100°C–1480°C, the sintering kinetics of (Y_0.95?xGd_xEu_0.05)₂O₃ is mainly controlled by grain‐boundary diffusion with similar activation energies of ~230 kJ/mol; (3) Gd³⁺ addition promotes grain growth and densification in the temperature range 1100°C–1400°C; (4) the bandgap energies of the (Y_0.95?xGd_xEu_0.05)₂O₃ ceramics generally decrease with increasing x; however, they are much lower than those of the oxide powders; (5) both the oxide powders and the transparent ceramics exhibit the typical red emission of Eu³⁺ at ~613 nm (the ⁵D₀→⁷F₂ transition) under charge transfer (CT) excitation. Gd³⁺ incorporation enhances the photoluminescence and shortens the fluorescence lifetime of Eu³⁺.     

Microstructure of a Molybdenum Nitride Layer Formed by Nitriding Molybdenum Metal

For pure molybdenum nitrided at 1373 K in NH₃ gas, microstructural observations of a molybdenum nitride layer were conducted through a transmission electron microscope. The molybdenum nitride layer consisted of two molybdenum nitrides: an outer one of γ-Mo₂N and an inner one of β-Mo₂N. A great number of (011)[0     1] type twins were observed in the β-Mo₂N phase, whereas the microstructure of the γ-Mo₂N phase was almost free from lattice defects except for slightly observed {111}〈112〉 type twin.     

Inversion domain boundaries in Mn and Al dual‐doped ZnO: Atomic structure and electronic properties

The atomic and electronic structures of inversion domain boundaries in Mn‐Al dual‐doped ZnO (Zn_0.89Mn_0.1Al_0.01O) have been investigated. Using atomic‐resolution scanning transmission electron microscopy, a head‐to‐head c‐axis configuration and cation stacking sequence of αβαβ|γ|αβαβ along the c‐axis were observed at the basal‐plane inversion domain boundary. Energy‐dispersive X‐ray spectroscopy and electron energy‐loss spectroscopy revealed significant localization of Mn and minor localization of Al at the basal‐plane inversion domain boundary. Based on experimental findings, a Mn‐doped basal‐plane inversion domain boundary slab model was constructed and refined by first principles calculations. The model is in agreement with atomic‐resolution images. The local electronic density of states of the slab model basal‐plane inversion domain boundary shows a hybridization of the Mn d and O p states within the valence band and localized Mn d states in the conduction band. The thermoelectric properties of Zn_0.99?xMn_xAl_0.01O ceramics have been reported in a previous work. In this work, the effects of inversion domain boundaries on the thermoelectric properties are discussed. In comparison to Zn_0.99?xMn_xAl_0.01O ceramics with x≤0.05, inversion domain boundaries in Zn_0.89Mn_0.1Al_0.01O caused thermal and electrical conductivity reduction due to interface scattering of phonons and electrons. The Seebeck coefficient increased, suggesting electron filtering at inversion domain boundaries.     

Reversible capture and release of carbon dioxide by binary system of polyamidine and polyethylene glycol

CO₂ absorbents were prepared from polyethylene glycol and the polyamidines having N,N′-disubstituted amidine structure in the main chain synthesized through acid-catalyzed melt polycondensation of orthoesters and α,ω-diamines. The homogeneous binary mixtures with the polyamidines captured CO₂ much more efficiently under CO₂ flow than the one with polyethyleneimine. Furthermore, we investigated the CO₂ capture and release by the binary mixtures in terms of effects of the volatility and the structure of polyamidines, temperature, and polyethylene glycol. Taking into consideration the results thus obtained, we conducted CO₂ capture/release cycles with the CO₂ capture step at 40 °C and with the CO₂ releasing step at 80 °C in an alternating manner, thereby demonstrating the repeatability of CO₂ capture and release by the binary system of the polyamidine and polyethylene glycol.     

Centrifugal Filter for Aerosol Collection

Air filters collect particles by the mechanical collection mechanisms, namely, inertia, interception, gravitational settling, and Brownian diffusion. There exists the most penetrating particle size (MPPS) in submicron size range for which none of the collection mechanisms work effectively. In this study, we propose a new type of filter named as “centrifugal filter,” which collects aerosol particles by centrifugal force together with the conventional mechanical collection mechanisms. The centrifugal filter proposed in the present work may be rotated by a motor or compressed air. Air passes through the filter in the axial direction of filter rotation. The filter rotates so does the air embedded in the filter, and therefore centrifugal force exerts on particles. In addition to the mechanical collection mechanisms, small migration of particles due to the centrifugal force enhanced the collection efficiency of submicron particles significantly without increasing the pressure drop. The performance tests of centrifugal filter were conducted by changing the fiber diameter, the air flow velocity and the rotation speed. We found that the collection efficiency of filter is enhanced significantly by rotating the filter without increasing the pressure drop and that the filter efficiency is well predicted by the conventional filtration theory accounting for the centrifugal force.

Copyright 2015 American Association for Aerosol Research     

Surface modification of contact lenses using adsorption of ethylene oxide branched copolymers

To examine methods for reducing the amount of adsorbed protein on the surface of contact lenses during use, cationic copolymers containing poly(ethylene oxide) units were synthesized and evaluated as surface modifiers. Poly(ethylene oxide) graft‐branched copolymers of composition 70 mol % dimethylaminoethyl methacrylate (DM) and 30 mol % methoxy polyethylene glycol methacrylate (Mp0G; p = 2, 4, 9; the average number of the ethylene oxide units) were obtained using nonionic monomers containing poly(ethylene oxide) units. The copolymers very efficiently prevented protein adsorption on a contact lens. Contact angle measurements showed that immersion in tear fluid made the lens surface hydrophobic because of adsorption of proteins with hydrophobic residues. The copolymer pretreatment made the lens surface hydrophilic, even after dipping in artificial tear fluid. These results suggest that adsorption of the poly(ethylene oxide) branched copolymer on the contact lens would make the lens surface hydrophilic and prevent protein adsorption. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Phase behavior of N‐isopropylacrylamide/acrylic acid copolymer hydrogels prepared with ultrasound

N‐Isopropylacrylamide/acrylic acid copolymer hydrogels were synthesized with ultrasound. The thermoresponsive phase behaviors of gels synthesized with ultrasound (US gels) were investigated and compared with those of gels synthesized in the absence of ultrasound (FR gels). The US gels showed thermoresponsive swelling behavior with a large hysteresis over a wide range of temperatures around its phase‐transition temperature. The hysteresis became larger with an increasing copolymerized acrylic acid content. The US gels were also characterized from the viewpoint of chemical, hydration, and macroscopic physical structures. Little difference was observed in the chemical and hydration structures of the FR gels and US gels. The macroscopic physical structure of the US gels was, however, distinct from that of the FR gels. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2449–2452, 2003