A TEM study on melt-crystallized poly(butylene terephthalate)

A study was made to investigate an optimum condition for ruthenium tetraoxide staining of poly(butylene terephthalate) (PBT) with glass transition temperature as low as ca. 23 degrees C for TEM observation of melt-grown PBT crystals. The morphological study of ultrathin sections prepared based on optimum staining at 25 degrees C for 8 h revealed formation of fringed-micellar crystal nuclei in the early stage and folded-chain fringed-micellar crystals in the later stage of isothermal crystallization at 40 degrees C from melt. The fraction of chain-folded crystals increased with increasing crystallization temperature from the quantitative analysis of crystal thickness in comparison with the reported morphology using the replica method.     

Implementation of Fault-Tolerant GridRPC Applications

A task parallel application is implemented with Ninf-G, a GridRPC system. A series of experiments are conducted on the Grid testbed in Asia Pacific for three months. Through tens of long executions, typical fault patterns were collected, and instability of the network throughput was determined to be a major reason of the faults. Several important points are stressed to avoid task throughput decline due to the fault-recovery operations: Timeout minimization for fault detection, background recovery, redundant task assignments, and so on. This study also issues a steer for design of the automated fault-tolerant mechanism in an upper layer of the GridRPC framework.     

Preparation of Lanthanum Nickel Oxide-Coated Ni Sheet Anodes and Their Application to Electrolytic Production of (CF3)3N in (CH3)4NF·4.0HF Melt

A new process for electrolytic production of a perfluorinated compound, (CF₃)₃N, using lanthanum nickel oxide-coated Ni sheet anode in the (CH₃)₄NF·4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone(PVP). The main components of the thin films were La₂O₃, LaNiO₃, and La₂NiO₄ at 500, 750 and 1000 °C, respectively. The anode performance in the (CH₃)₄NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO₃-coated Ni sheet anode gives the best anode performance. The potential of LaNiO₃-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm⁻² in the (CH₃)4NF·4.0HF melt for 100 h. This is because LaNiO₃ and NiF₃, and/or Ni₂F₅, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of (CF₃)₃N (21.4%) was obtained at 20 mA·cm⁻² in (CH₃)₄NF·4.0HF melt using the LaNiO₃-coated Ni sheet.     

采用TAB快速测定EMD性能

TAB(聚四氟乙烯乙炔黑)是好的导电和粘结合二为一的材料,采用该材料能快速评定EMD的性能。     

Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

Clinical studies on renal trauma

A total of 18 kidneys in 17 patients with renal trauma were treated at the Department of Urology, Mitoyo General Hospital between April 1991 and August 1997. Patients were between 10 and 88 years old (median; 52). Eleven of them were male and 6 were female. The main cause of injury was a traffic accident in 11 cases (64.7%), which was similar in tendency to previous reports in this country. According to the Classification of Renal Injury by the Japanese Association for the Surgery of Trauma in Japan, there were 8 cases (47.1%) of Type I (sub-capsular injury) and Type II (superficial injury) that was classified a minor injury, and there were 9 cases (52.9%) of Type III (deep injury), Type IV (pedicle injury) and open injury that was classified as a major injury. Surgical treatment was performed in 8 cases (47.1%), which were all classified as a major injury. Posttraumatic plasma lactate dehydrogenase (LDH) was elevated immediately in case of major injury in comparison with a case of minor injury. Serum LDH may be useful as a parameter of the degree of renal trauma.     

Immunohistochemical quantitation for extracellular matrix proteins in rats with glomerulonephritis induced by monoclonal anti-Thy-1.1 antibody

During clot retraction, platelets interact with fibrin resulting in marked reduction of clot volume. Altered fibrin structure has been reported to affect clot retraction as measured by serum expression. This study was performed to test whether such altered retraction was the result of increased resistance to network collapse or due to decreased force development by platelets. Altered fibrin structure was documented as variation of fibre mass/length ratios (mu) and shifts in clot elastic modulus. The force developed by platelets during clotting was measured directly. Increasing the fibrinogen concentration led to thinner fibre formation (decreased mu), and a linear increase in gel elastic modulus. Over a fibrinogen concentration range of 100 to 400 mg/dl, force development was minimally affected. Force development and clot elastic modulus increased in a linear fashion with increasing platelet concentration. Increasing the calcium concentration from 5 to 20 mM caused a 160% increase in fibrin fibre size (mu), and a 52% decline in clot modulus. Force developed at 1200 s declined by 17%. At 15 mg/ml, dextran and hydroxyethyl starch (HES) also increased mu, and decreased clot modulus; however, both agents markedly reduced force development. Increasing ionic strength or the addition of IgG decreased mu and increased gel elastic modulus. Force development increased modestly with increased ionic strength, did not change with addition of IgG in saline and declined with addition of IgG in maltose. This study indicates that force development is primarily dependent on platelet function while clot modulus depends on both fibrin structure and platelet function.(ABSTRACT TRUNCATED AT 250 WORDS)     

Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.     

Reversible crosslinking in cellulose. I. Determination of mercaptan and disulfide in modified cotton

Mercaptan and disulfide contents of modified cotton fabrics could be determined by application of Leach's polarographic method for wool, with minor modification. It was found that mercaptocellulose prepared by the reaction of tosyl cellulose and potassium thiolacetate followed by alkaline hydrolysis contained considerable amounts of disulfided in addition to mercaptain. Iodometric titration of mercaptocellulose gave a higher value of mercaptan than that obtained by the polarographic method. The mercaptan and disulfide contents and methylene blue uptake of the iodine-treated samples indicate that some of the mercaptan groups further undergo oxidation to acidic groups as a result of the iodine treatment. The spatial effect in the oxidation of mercapto groups in modified cotton is briefly discussed.