Effect of steric hindrance on hydrogen‐bonding interaction between polyesters and natural polyphenol catechin

The phase behaviors for the blends of poly(3‐hydroxypropionate) (PHP), poly(L ‐lactide) (PLLA), poly(D ‐lactide) (PDLA), and poly(D,L ‐lactide) (PDLLA) with catechin were investigated by differential scanning calorimetry. In PLLA/catechin, PDLA/catechin, and PDLLA/catechin blends, two glass transitions were detected when the catechin content was ≥40 wt %, whereas in PHP/catechin blends only one glass transition was observed over the whole range of blend compositions. The former and the latter results should reflect the inhomogeneous and the homogeneous nature of the blends, respectively, in the amorphous phase. These different phase behaviors should arise from the differences in the chemical structures between PHP and PLLA/PDLA/PDLLA, which dominates the strength and the number of intermolecular hydrogen‐bonding interactions between the ester carbonyl groups of polyesters and the phenol groups of catechin. As detected by FTIR spectroscopy, in comparison with PHP, the steric hindrance of side‐chain methyl groups of PLLA, PDLA, and PDLLA might restrain the formation of hydrogen bonds between their ester carbonyl groups and the phenol hydroxyl groups of catechin, even weakening the strength of such hydrogen bonds. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3565–3573, 2004     

Electrochemical behavior of the Ti6Al4V alloy implanted by nitrogen PIII

Plasma surface treatments have been used very often to enhance the surface properties of metallic materials. In this work, Ti6Al4V titanium alloy was treated by nitrogen plasma immersion ion implantation (NPIII) in order to obtain improvements in its surface properties, such as corrosion resistance evaluated here. The microstructure and corrosion behavior of the implanted and unimplanted samples were evaluated, using, XRD, GDOES and potentiodynamic polarization and impedance electrochemical spectroscopy tests in 0.6 M NaCl solution. It was verified that the NPIII created resistant layers to corrosive attacks. In corrosion tests by polarization, the implanted samples showed corrosion current density reduction of about 10 times compared to the Ti6Al4V alloy without treatment. Besides that, it was also observed a reduction of the passive current density of one order of the magnitude. In all the studied cases, the polarization curves were shifted to more positive values of potentials, indicating a lower tendency of these PIII treated surfaces to corrosion. The implantation process produced a thin TiN surface layer followed by Ti₂N and then a layer with nitrogen in solid solution, all detected by GDOES combined with X-ray diffraction. These layers promoted an excellent polarization resistance of the Ti6Al4V surfaces on impedance spectroscopy tests also. This better performance in these tests can be correlated with the formation of continuous nitride layer, which could retard chloride ions ingress into the substrate.     

日本基于性能结构抗震设计方法的发展

1995年兵库县南部(神户)地震中建筑物的破坏表明,对每一幢建筑物以满足性能要求进行结构设计是十分必要的.作者介绍了由日本国建设省组织的联合研究开发项目(1995～1998)以及近期按基于性能设计修订的建筑标准的工作情况.     

Low cycle fatigue behaviors of elbow pipe with local wall thinning

Low cycle fatigue tests were conducted using 100A elbow specimens made of STPT410 carbon steel with local wall thinning. Local wall thinning by erosion/corrosion was simulated by machined pipe wall thinning. The local wall thinning areas were located at three different areas, called extrados, crown and intrados. The elbow specimens were subjected to cyclic in-plane bending under displacement control without internal pressure. The effects of eroded conditions, such as eroded ratio, eroded angle and position, on the low cycle fatigue behavior and fatigue life were discussed by using experimental results and finite element analyses. Also the location of crack initiation and the crack growth direction could be predicted by three dimensional elasto-plastic finite element analyses. In addition, the safety margin of eroded elbows against seismic loading was discussed by comparing the fictitious stress of elbows with the allowable stress limit demanded by the design code.     

Effect of the addition of silver compounds during the pyrolysis of manganese nitrate on tantalum anodic oxide film

A study of the pyrolysis of an aqueous solution of manganese nitrate in the presence of silver compounds has been carried out. Thermal analysis showed that the MnO₂ formation temperature and the transformation temperature from MnO₂ to Mn₂O₃ shifted towards a lower temperature in the presence of silver acetate. A large particle-size and high crystallinity MnO₂ was formed; this may be a useful method of making an excellent tantalum capacitor with high capacitance.     

Verification of additional merits of a bimanual-coordinated rehabilitation robot using near-infrared spectroscopic technology

Using our designed robot, previous work has confirmed that bimanual training induced greater oxygenated-hemoglobin concentration than unilateral-limb training. However, the inter-hemispheric asymmetry of oxygenated-hemoglobin concentration was not compared between the bimanual and unilateral-limb patterns. To confirm the merits of our designed robot based on cerebral hemoglobin activation, 18 healthy subjects performed bimanual and unilateral-limb tasks in active-resisted mode and active-assisted mode for the right and left control sides (determines from that which limb provides a larger force). Analyses of variance were performed to compare the laterality index (LI) of two hemispheres between the two control sides, and to compare oxygenated-hemoglobin concentration between the different training patterns. The difference of LI between the two control sides was distinct in unilateral-limb patterns (p?=?0.029) but not obvious in bimanual patterns. As for the oxygenated-hemoglobin, active-resisted tasks induced a higher concentration than active-assisted tasks in the left control side (p?=?0.048). Results demonstrated that the proposed bimanual training induced the functional integrity of two hemispheres, and the robot is favorable for improving bimanual movement-coordination function. Additionally, active-resisted tasks had a higher difficulty level than active-assisted task. Therefore, the robot has a potential for delivering strength enhancement training in bimanual patterns.     

Hydrogen‐bonding interaction between poly(ε‐caprolactone) and low‐molecular‐weight amino compounds

The specific interactions between several low‐molecular‐weight diamino compounds and poly(ε‐caprolactone) (PCL) have been investigated by FT‐IR. It was found that PCL and 3,3′‐diaminodiphenylmethane (3,3′‐DADPM) interact through strong intermolecular hydrogen bonds in the blend. Thermal and mechanical properties of PCL/3,3′‐DADPM blends were investigated by DSC and tensile measurements, respectively. The glass transition temperature of the blend increases while both the melting point and the elongation‐at‐break of the blend decrease with the increase of 3,3′‐DADPM content. Besides 3,3′‐DADPM, several other low‐molecular‐weight compounds containing two amino groups, such as o‐phenylenediamine or 1,6‐diaminohexane, were also added into PCL and the corresponding blend systems were investigated by FT‐IR and DSC. The effect of the chemical structure of the additives on the properties of PCL is discussed. © 2001 Society of Chemical Industry     

Effect of Ultrasonication on the Microstructure and Tensile Elongation of Zirconia-Dispersed Alumina Ceramics Prepared by Colloidal Processing

To obtain dense, fine-grained ceramics, fine particles and advanced powder processing, such as colloidal processing, are needed. Al₂O₃ and ZrO₂ particles are dispersed in colloidal suspensions by electrosteric repulsion because of polyelectrolyte absorbed on their surfaces. However, additional redispersion treatment such as ultrasonication is required to obtain dispersed suspensions because fine particles tend to agglomerate. The results demonstrate that ultrasonication is effective in improving particle dispersion in suspensions and producing a homogeneous fine microstructure of sintered materials. Superplastic tensile ductility is improved by ultrasonication in preparing suspensions because of the dense and homogeneous fine microstructure.     

Effect of sintering additive on crystallographic orientation in AlN prepared by slip casting in a strong magnetic field

The preparation of oriented AlN bulk ceramics with and without additives was achieved by slip casting in a high magnetic field. The a and b axes of the AlN were aligned parallel to the direction of the magnetic field. The degree of crystallographic orientation was controlled by the viscosity of the slurry and the grain growth during sintering attributed to the sintering additives. The mechanical properties of the textured AlN depended on the direction of the crystallographic orientation.