Preparation of Pb(Zr0.52Ti484848)O3 thin films on silicon-on-insulator substrates by excimer laser deposition combined with rapid thermal annealing

In this paper we report the fabrication of ferroelectric Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films on Si-on-Insulator (SOI) substrates with and without an electrode by pulsed excimer laser deposition combined with rapid thermal annealing. Based on the structural and interfacial characteristics analysis by X-ray diffraction (XRD), Rutherford backscattering spectroscopy (RBS), cross-sectional transmission electron microscopy (XTEM) and automatic spreading resistance measurement (ASR), the film structure and orientation were revealed to be dependent on the annealing time and annealing temperature as well as deposition temperature. From RBS spectra and XTEM observation it is shown that the PZT thin films did not interact with the top silicon layers of SOI and that the composition of the film was similar to the target. The ASR measurements showed that the electrical properties of PZT/SOI as well as PZT/Pt/SOI were abrupt, and that the electrical properties of the SOI substrates were still good after the PZT growth.     

半导体激光器用铷D2线光电流谱稳频

本文报导了用铷原子７８００Ａ光电流谱来稳定半导体激光器的工作，在光电流谱线的中部发现了有利于稳频的凹陷，将半导体激光器频率锁定在凹陷的中央，估算的频率稳定度为１ＭＨｚ。     

建立数据库用微机进行钻井液设计

为了更好地指导现场钻井液施工,利用微机建立有关数据库和相应的设计软件,根据地质、工程的要求和井下情况进行钻井液设计,其特点是资料全面、程序运行可靠且操作简便,设计符合现场情况,施工顺利。在千12区块,用微机设计的109口井与人工设计的75口井相比,钻井速度提高,井下复杂情况减少,提高了经济效益。     

Theoretical study on gain and tuning characteristics of infrared-microwave pumped NH3 FIR laser

Based on the semi-classical density matrix equation theory, the gain and tuning characteristics of infrared-microwave pumped NH₃ FIR laser were studied. It was shown that quasi-continuously tuning could be obtained by the tuning of microwave frequency and the efficiency of the laser could be enhanced by electric dipole transition enhancement effect, but compromise should be made between FIR laser output and frequency tuning range.     

无机添加剂的浓度及pH值对纺锤形α－Fe_2O_3晶貌的影响

本文以高浓度Ｆｅ３＋盐溶液为原料，采用沸腾回流的强迫水解法研究了无机添加剂浓度及反应液初始ｐＨ值对产物纺锤形α－Ｆｅ２Ｏ３晶貌的影响。结果表明，添加剂浓度和反应液初始ｐＨ值对纺锤形α－Ｆｅ２Ｏ３的轴比具有明显的影响，并且当添加剂浓度增加到一定值时，纺锤形α－Ｆｅ２Ｏ３出现解体。     

用于生产甲基丙烯酸的杂多酸催化剂的研究

以异丁烯为原料的两段直接氧化生产甲基丙烯酸最新工艺有许多优点。其技术关键在于研制出高效的甲基丙烯醛选择性氧化催化剂。本文报道P-Mo-As-Cu杂多化合物催化剂的组成、制备条件对催化剂活性的影响。经优化后获得高选择性、高活性的二段氧化催化剂，其甲基丙烯酸收率达60％以上。     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

超细铁粉和氧化铁颗粒的研究

用透射电镜和图像分析仪等研究了超细铁粉和γ-Fe_2O_3粉末的结构、形貌、粒子的平均尺寸以及粒度分布。研究结果表明,多数超细铁粉粒子近似呈球形,并且,铁粉粒子由两相组成,粒子的核心部分是金屑a-Fe,表面的包裹层为氧化物层,它由Fe_3O_4和7-Fe_O_3的混合物组成。氧化层的平均厚度大约占整个粒子直径的20％左右。羰基铁粉粒子(含氧化层)的平均直径为16nm。直径在4～24nm范围的粒子数占总粒子数的91％,而7-Fe_2O_3粉末既有雪茄状粒子,也有小球状粒子。分析表明,球状粒子的平均直径为113nm,雪茄状粒子的平均直径(按<长 宽>/2计算)为148nm。由于超细铁粉粒子很细,且有磁性,制备电镜试样时分散比较困难。本文比较了几种分散方法后,使用了一种较好的分散方法——超声喷管分散法。     

含淀粉聚乙烯膜的时控光降解研究

使用复合光降解剂，得到了可光降解的生物降解膜。对膜的光降解进行了考察，并对影响光降解的因素进行了讨论，结果表明，我们所制得的膜是一种较好的时控光降解膜。