NOTCHED FATIGUE BEHAVIOUR OF TWO COLD ROLLED STEELS

Abstract— A SAE1010 plain carbon steel and a SAE945X HSLA steel were cold rolled to various thickness reductions. Centre notched specimens were tested under stress control at a stress ratio of—1. The effect of loading direction on the fatigue strength was examined. The notched specimen fatigue strength was only slightly increased by cold rolling, since two opposing factors: the smooth specimen fatigue strength and the notch sensitivity, were increased by cold rolling. The notched specimen fatigue strength in the transverse direction was approximately the same as that in the longitudinal direction. An empirical equation and equations derived from fracture mechanics and Neuber's rule were applied to predict the fatigue notch factor for the sharp and blunt notch geometries examined. A reasonable agreement between the predictions and the experimental results was observed for the sharp notches. For the blunt notches, the predicted fatigue notch factors were conservative.     

Investigation of the properties,structure, and corrosion resistance of the new alloy KhN30MDB

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 3, pp. 30–32, March, 1992.     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

铟镓砷磷半导体激光的生物特性及73例椎基底动脉供血不足者的治疗

通过对甸镓砷磷半导体激光和常用He-Ne激光生物特性进行初步比较,说明半导体激光对治疗椎基底动脉供血不足疗效较明显。     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

The large deflection dynamic plastic response of rectangular plates

By assuming a kinematically admissible, time-dependent velocity field and considering the global equilibrium of all the forces acting on each rigid segment during large deflection of a plate, a complete theoretical investigation is undertaken herein to trace the large deflection dynamic plastic response (including the transient phase) of simply-supported or fully-clamped rectangular plates. This procedure deduces two modifying factors ƒ₁ and ƒ₂ which reflect the effect of the membrane forces and are employed to formulate the governing equations in the case of large deflections. The present prediction of the final plate deflection coincides excellently with the corresponding experimental results for deflections up to 5–10 times the plate thickness. This theory greatly improves the estimates based on the bending-only theory and provides a new way to trace the transient phase of dynamically loaded plates when the effect of membrane forces is significant.     

新型环氧树脂绝缘浸渍胶（WSK）在微特电机上的应用

介绍了新型环氧树脂少溶剂快干绝缘浸渍胶的性能试验数据及基在微特电机上的应用及注意事项。     

YL-100型自动加药装置在乙烯循环水场的应用

介绍了国产YL—100型自动加药装置功能及其在中国石化茂名石化乙烯工业公司乙烯循环水场的应用情况，结果表明其运行平稳，总磷测试数据可靠，可达到循环水自动加药控制的目的。