Integrated perovskite/organic bulk heterojunction (BHJ) solar cells have the potential to enhance the efficiency of perovskite solar cells by a simple one‐step deposition of an organic BHJ blend photoactive layer on top of the perovskite absorber. It is found that inverted structure integrated solar cells show significantly increased short‐circuit current (Jsc) gained from the complementary absorption of the organic BHJ layer compared to the reference perovskite‐only devices. However, this increase in Jsc is not directly reflected as an increase in power conversion efficiency of the devices due to a loss of fill factor. Herein, the origin of this efficiency loss is investigated. It is found that a significant energetic barrier (≈250 meV) exists at the perovskite/organic BHJ interface. This interfacial barrier prevents efficient transport of photogenerated charge carriers (holes) from the BHJ layer to the perovskite layer, leading to charge accumulation at the perovskite/BHJ interface. Such accumulation is found to cause undesirable recombination of charge carriers, lowering surface photovoltage of the photoactive layers and device efficiency via fill factor loss. The results highlight a critical role of the interfacial energetics in such integrated cells and provide useful guidelines for photoactive materials (both perovskite and organic semiconductors) required for high‐performance devices. 相似文献
3D printing has been intensively explored to fabricate customized structures of responsive materials including hydrogels, liquid‐crystal elastomers, shape‐memory polymers, and aqueous droplets. Herein, a new method and material system capable of 3D‐printing hydrogel inks with programed bacterial cells as responsive components into large‐scale (3 cm), high‐resolution (30 μm) living materials, where the cells can communicate and process signals in a programmable manner, are reported. The design of 3D‐printed living materials is guided by quantitative models that account for the responses of programed cells in printed microstructures of hydrogels. Novel living devices are further demonstrated, enabled by 3D printing of programed cells, including logic gates, spatiotemporally responsive patterning, and wearable devices. 相似文献
For biotherapeutics that require multiple administrations to fully cure diseases, the induction of undesirable immune response is one common cause for the failure of their treatment. Covalent binding of hydrophilic polymers to proteins is commonly employed to mitigate potential immune responses. However, while this technique is proved to partially reduce the antibodies (Abs) reactive to proteins, it may induce Abs toward their associated polymers and thus result in the loss of efficacy. Zwitterionic poly(carboxybetaine) (PCB) is recently shown to improve the immunologic properties of proteins without inducing any antipolymer Abs against itself. However, it is unclear if the improved immunologic profiles can translate to better clinical outcomes since improved immunogenicity cannot directly reflect amelioration in efficacy. Here, a PCB nanocage (PCB NC) is developed, which can physically encase proteins while keeping their structure intact. PCB NC encapsulation of uricase, a highly immunogenic enzyme, is demonstrated to eradicate all the immune responses. To bridge the gap between immunogenicity and efficacy studies, the therapeutic performance of PCB NC uricase is evaluated and compared with its PEGylated counterpart in a clinical‐mimicking gouty rat model to determine any loss of efficacy evoked after five administrations. 相似文献
Injectable and malleable hydrogels that combine excellent biocompatibility, physiological stability, and ease of use are highly desirable for biomedical applications. Here, a simple and scalable strategy is reported to make injectable and malleable zwitterionic polycarboxybetaine hydrogels, which are superhydrophilic, nonimmunogenic, and completely devoid of nonspecific interactions. When zwitterionic microgels are reconstructed, the combination of covalent crosslinking inside each microgel and supramolecular interactions between them gives the resulting zwitterionic injectable pellet (ZIP) constructs supportive moduli and tunable viscoelasticity. ZIP constructs can be lyophilized to a sterile powder that fully recovers its strength and elasticity upon rehydration, simplifying storage and formulation. The lyophilized powder can be reconstituted with any aqueous suspension of cells or therapeutics, and rapidly and spontaneously self‐heals into a homogeneous composite construct. This versatile and highly biocompatible platform material shows great promise for many applications, including as an injectable cell culture scaffold that promotes multipotent stem cell expansion and provides oxidative stress protection. 相似文献
New 3,3′‐dithioalkyl‐2,2′‐bithiophene ( SBT )‐based small molecular and polymeric semiconductors are synthesized by end‐capping or copolymerization with dithienothiophen‐2‐yl units. Single‐crystal, molecular orbital computations, and optical/electrochemical data indicate that the SBT core is completely planar, likely via S(alkyl)?S(thiophene) intramolecular locks. Therefore, compared to semiconductors based on the conventional 3,3′‐dialkyl‐2,2′‐bithiophene, the resulting SBT systems are planar (torsional angle <1°) and highly π‐conjugated. Charge transport is investigated for solution‐sheared films in field‐effect transistors demonstrating that SBT can enable good semiconducting materials with hole mobilities ranging from ≈0.03 to 1.7 cm2 V?1 s?1. Transport difference within this family is rationalized by film morphology, as accessed by grazing incidence X‐ray diffraction experiments. 相似文献
Piezoelectric stages are widely used for parts manipulation, including micro-component assembly and bio-cell manipulation. This paper proposes a bi-axis piezoelectric stage based on a friction driven mechanism. The carrier slides on a supporting frame and slider constructed in the same plane as a low-profile stage. The dynamic model of the friction driven is based on a 2-DOF lumped model considering the impact and separation behavior. The first mass is the bulk piezoelectric actuator (slab)—as a vibrator—and the second is the driven slider. The stiffness ratio of the piezoelectric slab-to-the driven slider affects the output force of the slider because of the contact time ratio. Moreover, the stepping size is adjusted according to the duty ratio of the pulse width of the driving signal. The stepping size of 0.1 μm is achieved in the X and Y axes corresponding to 3% and 5% of the duty ratio, respectively, of 512-Hz carrier frequency in 20-Vpp driving signal. When the duty ratio is 100%, the full speed of 18 and 16 mm/s are achieved in the X- and Y-axes, respectively. The dimensions of the piezoelectric stage are 61 × 58 × 21.3 (high) mm3.
This article outlines advances in molecular modeling and simulation using massively parallel high‐performance computers (HPC). In the SkaSim project, partners from the HPC community collaborated with users from science and industry. The aim was to optimize the prediction of thermodynamic property data in terms of efficiency, quality and reliability using HPC methods. In this context, various topics were dealt with: atomistic simulation of homogeneous gas bubble formation, surface tension of classical fluids and ionic liquids, multicriteria optimization of molecular models, the development of the molecular simulation codes ls1 mardyn and ms2, atomistic simulation of gas separation processes, molecular membrane structure generators, transport resistors and the evaluation of predictive property data models based on specific mixture types. 相似文献
Four soluble dialkylated tetrathienoacene ( TTAR) ‐based small molecular semiconductors featuring the combination of a TTAR central core, π‐conjugated spacers comprising bithiophene ( bT ) or thiophene ( T ), and with/without cyanoacrylate ( CA ) end‐capping moieties are synthesized and characterized. The molecule DbT‐TTAR exhibits a promising hole mobility up to 0.36 cm2 V?1 s?1 due to the enhanced crystallinity of the microribbon‐like films. Binary blends of the p‐type DbT‐TTAR and the n‐type dicyanomethylene substituted dithienothiophene‐quinoid ( DTTQ‐11 ) are investigated in terms of film morphology, microstructure, and organic field‐effect transistor (OFET) performance. The data indicate that as the DbT‐TTAR content in the blend film increases, the charge transport characteristics vary from unipolar (electron‐only) to ambipolar and then back to unipolar (hole‐only). With a 1:1 weight ratio of DbT‐TTAR DTTQ‐11 in the blend, well‐defined pathways for both charge carriers are achieved and resulted in ambipolar transport with high hole and electron mobilities of 0.83 and 0.37 cm2 V?1 s?1, respectively. This study provides a viable way for tuning microstructure and charge carrier transport in small molecules and their blends to achieve high‐performance solution‐processable OFETs. 相似文献