A study on the fracture characteristics of tapered double cantilever beams made of heterogeneous composites with adhesive interfaces

Journal of Mechanical Science and Technology - In this study, CFRP and aluminum properties were investigated by carrying the static experiment on the shape-dependent bonding structure, and designed...     

井下通风网络分析与方案优化

为解决传统矿井通风系统无法满足矿井扩产需求,在以老矿井为例分析其通风现状的基础上,对当前井下通风系统进行测定和评价,并针对其所存在的问题初步提出整改建议;最后,在上述分析的基础上对工作面的需风量进行重新核算,并提出三套优化方案,最终确定方案二为最佳方案.     

考虑负荷释放过程的配电网网架结构经济性计算模型

当前配电网网架建设多以规划期末年负荷水平进行规划,忽略了负荷发展的动态过程,容易造成配电网超水平建设,导致设备利用率低、投资时效不足等问题.针对此问题,定义了负荷释放概念,提出了一种考虑负荷释放过程的配电网网架结构经济性计算模型,该模型考虑了负荷释放过程中配电网动态的运行网络损耗和停电损失,从规划期整体出发,对配电网网架结构经济性进行定量评估.运用实际地区线路进行算例仿真,仿真结果表明,该模型可以有效评估不同网架发展过程中,配电网建设的经济性.     

Thermal stability,flame retardance,and mechanical properties of polyamide 66 modified by a nitrogen–phosphorous reacting flame retardant

Flame‐retardant polyamide 66 (PA66) was prepared by the polymerization between PA66 prepolymer and N‐benzoic acid (ethyl‐N‐benzoic acid formamide) phosphamide (NENP). Compared with the pure PA66, the flame‐retardant PA66 exhibited better thermal stability, as indicated by thermogravimetric analysis results. The limiting oxygen index was 28% and the UL‐94 test results of the flame‐retardant PA66 indicated a V‐0 rating when the content of the NENP prepolymer was 5 wt %. The flammability and flame‐retardant mechanism of PA66 were also studied with cone calorimetry and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy, respectively. The mechanical properties results show that the flame‐retardant PA66 resin had favorable mechanical properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43538.     

Non-vacuum sintering process of WC/W2C reinforced Ni-based coating on steel

Ni-based composite coatings containing varied contents of tungsten carbides on low carbon steel were fabricated. Effects of sintering temperature and tungsten carbides contents on the surface, interface, microstructure and wear resistance of the coatings were investigated using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Vickers microhardness tester, bulk hardness tester and pin-on-disc tribometer. The results indicated that with appropriate sintering temperature (1230 °C), smooth coating surfaces can be achieved. Favorable interfaces about 200 μm can be got that both the chemical composition and property of the interfacial region showed gradual transitions from the substrates to the coatings. Microstructure of the coatings consists of tungsten carbides and M7C3/M23C6 in the matrix. With excessive sintering temperature, tungsten carbides tend to dissolve. Ni-based coatings containing tungsten carbides showed much higher level of bulk hardness and wear resistance than ISO Fe360A and ASTM 1566 steels. With increasing contents of tungsten carbides from 25% to 40%, bulk hardness of Ni-based coatings gradually increased. Ni-based coating with 35% tungsten carbides performed the best wear resistance.     

Mechanical Relaxation of a Ti_(36.2)Zr_(30.3)Cu_(8.3)Fe_4Be_(21.2) Bulk Metallic Glass: Experiments and Theoretical Analysis

The dynamic mechanical relaxation behavior of Ti_(36.2)Zr_(30.3)Cu_(8.3)Fe_4Be_(21.2) bulk metallic glass with good glass-forming ability was investigated by mechanical spectroscopy. The mechanical relaxation behavior was analyzed in the framework of quasi-point defects model. The experimental results demonstrate that the atomic mobility of the metallic glass is closely associated with the correlation factor χ. The physical aging below the glass transition temperature T g shows a non-Debye relaxation behavior, which could be well described by stretched Kohlrausch exponential equation. The Kohlrausch exponent β_(aging) reflects the dynamic heterogeneities of the metallic glass. Both concentration of "defects" and atomic mobility decrease caused by the in situ successive heating during the mechanical spectroscopy experiments.     

Enhanced Stretch Formability of Magnesium Alloy Sheet by Prestretching at Various Speeds at Higher Temperature

JOM - Prestretch deformation of 6.48% with various initial speeds (1 mm/min, 101 mm/min, and 100 mm/min) was carried out at 723 K to improve the formability of...     

氧化温度和分散剂种类对Si3N4浆料性能的影响

研究了自蔓延燃烧合成Si₃N₄粉的氧化处理（在空气气氛中分别于400、600、800℃保温3 h）以及添加的分散剂种类（分别为聚丙烯酸钠、六偏磷酸钠、三聚磷酸钠、木质素磺酸钙）对制备的Si₃N₄浆料的抗沉降性、ζ电位和黏度的影响。结果表明：1)在空气气氛中于800℃保温3 h氧化处理后,粉体中Si₂N₂O含量增多;用其制备的浆料的稳定性最好,ζ电位绝对值较大,黏度最小。2)以六偏磷酸钠作为分散剂制备的Si₃N₄浆料的稳定性较好,ζ电位绝对值最大,黏度最小。3)添加0.021%（w）六偏磷酸钠制备的Si₃N₄浆料的ζ电位绝对值最大,黏度较小。     

双酚AF型聚碳酸酯的制备与性能

以三光气和双酚AF为原料,采用界面缩聚法合成双酚AF型聚碳酸酯,得到最佳的聚合条件为：三光气和双酚AF的物质的量之比为1.3∶3,催化剂三乙胺的用量为双酚AF质量的4%,反应温度为35℃,反应时间为60 min。通过傅里叶变换红外吸收光谱、乌氏黏度计、同步热分析仪、热变形/维卡软化温度测试仪及极限氧指数测定仪对制备样品进行了结构和性能表征,结果表明,制备样品为双酚AF型聚碳酸酯,样品的黏均分子量为32000。玻璃化转变温度为164.3℃,热失重5%的温度为440.8℃,热变形温度为149℃、维卡软化温度为157℃,具有较好的耐热性能;极限氧指数为29.5%,具有较好的阻燃性能。样品经碱溶液浸泡后质量损失率较小,耐碱腐蚀性能较好。样品在很多有机溶剂中都有很好的的溶解性。