EBSP study of the annealing behavior of aluminum deformed by equal channel angular processing

Commercial purity aluminum (99.5%) was fabricated by equal channel angular pressing (ECAP) up to total accumulated strains of approx. 10. The annealing behavior of material deformed to total strains of approx. 1 and 10 was investigated, using heat treatments of 2 h at various temperatures from 100 to 500 °C. The microstructure of the annealed materials was characterized using the electron back-scatter pattern technique. A number of parameters were determined including the distribution and average values of both the boundary spacings and misorientations. For samples deformed to a total strain of 1, annealing resulted in discontinuous recrystallization. For samples deformed to a total strain of 10, annealing resulted in microstructures exhibiting characteristics of both uniform coarsening and, in a number of places, of discontinuous recrystallization. An attempt was made, based on the boundary spacing distributions, to separate these two components. The grain size after annealing was still however small, being just 6.4 μm after 2 h at 300 °C.     

Nanoscale Crystallization in Amorphous Fe–P–Mn Alloys

Mössbauer effect measurements and physicochemical analysis demonstrate that annealing of amorphous Fe–P–Mn alloys leads to the formation of a nanocrystalline structure.     

Fabrication, assembly, and characterization of molecular electronic components

One of the ultimate miniaturizations in nanotechnology is molecular electronics, where devices will consist of individual molecules. There are many complications associated with the use of molecules in electronic devices, such as the electronic perturbations in the molecule associated with being bonded to an electrode, how electrons traverse the metal-molecule junction, and the difficulty of macroscopically addressing single to very few molecules. Whether fabricating a test structure or a usable device, the use of self-assembly is fundamental to the fabrication of molecular electronic devices. We will discuss how to fabricate self-assembled monolayers into test assemblies and how to use intermolecular interactions to direct molecules into desired positions to create nanostructures and to connect functional molecules to the outside world. These assemblies serve as test structures for measurements on single or bundled molecules. The development of several experimental techniques, including various scanning probes, mercury drop junctions, break junctions, nanopores, crossed wires, and other techniques using nanoparticles have enabled the ability to test these structures and make reproducible measurements on single molecules. Many of these methods have been developed to test molecules with potential for integration into devices such as oligo (phenylene-ethynylene) molecules and other /spl pi/-conjugated molecules, in ensemble or single-molecule measurements.     

On optimal sequential prediction for general processes

This paper considers several aspects of the sequential prediction problem for unbounded, nonstationary processes under pth power loss /spl lscr//sub p/(u,v)=|u-v|/sup p/, 1相似文献   

Small–Capacity Modular Units. Experience in Startup and Management

A series of small–capacity units has recently been constructed in regions of oil field development and crude oil and gas condensate production to satisfy the requirements for such petroleum products as naphtha, diesel fuel, kerosene, and boiler fuel and to reduce costs for delivery of these products. There are almost no data in the technical literature, particularly in periodicals, on the construction and operation of small–capacity units. We attempt to generalize the experience of Orgeneftekhimzavody Trust in this area. We hope that this experience will be useful to specialists in the development and management of small–capacity plants.     

Application of convolutional error correcting codes in ultrawideband M-ary PPM signaling

The interference issues related to ultrawideband (UWB) radio pose tight restrictions on the maximum data rate of UWB radio telecommunication systems. A possible solution is to reduce the required signal to interference ratio (SIR) that gives satisfactory performance to the UWB system. In this letter, we propose coded M-ary UWB radio communication systems. Two classes of convolutional codes, namely, low-rate superorthogonal codes and high-rate punctured codes are considered for this purpose. Simulation results on the bit error rate of the proposed system indicates that the system is capable to work in lower SIR's and therefore supports higher data transmission rates in a real interference environment compared to the previously proposed UWB communication systems.     

Reducible rank codes and their applications to cryptography

We present a new family of so-called reducible rank codes which are a generalization of rank product codes . This family includes maximal rank distance (MRD) codes for lengths n>N in the field F/sub N/. We give methods for encoding and decoding reducible rank codes. A public key cryptosystem based on these codes and on the idea of a column scrambler is proposed. The column scrambler "mixes" columns of a generator (parity-check) matrix of a code. It makes the system more resistant to structural attacks such as Gibson's attacks. Possible attacks on the system are thoroughly studied. The system is found to be secure against known attacks for public keys of about 16 kbits and greater.     

A multiwinding modeling method for high frequency transformers and inductors

This paper presents a method to obtain an electric model for transformers and inductors, including both frequency and geometry effects in the windings, which can be linked with existing core models. One-dimensional distributions for magnetic and electric fields are assumed, and from Maxwell's equations an equivalent electric circuit is easily obtained. This equivalent circuit has been included in analog simulators (Spice, AnalogWorkBench, Saber ...), and comparisons between measured and simulated results are shown, both in time domain and in AC sweep, which verify the model accuracy. The model described in this paper allows designers to deal with key issues in the design of high-frequency magnetic components (copper losses, leakage inductance, skin and proximity effects) by using analog simulators, which are usually more familiar to them than finite-element analysis tools.     

求解二维结构-声耦合问题的一种直接方法

本文基于传递矩阵法(TMM)和虚拟边界元法(VBEM)，提出了一种求解在谐激励作用下二维结构-声耦合问题的直接法。文中对任意形状的二维弹性环建立了一阶非齐次运动微分方程组，便于用齐次扩容精细积分法求解，对于含有任意形状孔穴的无穷域流体介质的Helmholtz外问题，采用复数形式的Burton-Miller型组合层势法建立了虚拟边界元方程，保证了声压在全波数域内存在唯一解。根据叠加原理并结合最小二乘法，提出了一种耦合方程的直接解法，由于该方法不存在迭代过程，因而具有较高的计算精度和效率。文中给出了二个典型弹性环在集中谐激励力作用下声辐射算例，计算结果表明本文方法较通常采用的混合FE／BE法更为有效。