Hydrologic regionalisation impacts on wet-weather control selection.

Continuous simulation is performed using the US Environmental Protection Agency (USEPA) Storm Water Management Model (SWMM) to evaluate regional differences around the United States in hydrologic and water quality performance of wet-weather controls. Controls are characterised as being limited by peak inflow rate (i.e. any device with little or no storage, such as screens, filters and some proprietary devices) or by storage capacity (e.g., ponds, tanks). For flow-limited devices, results are presented in the form of percentage of annual runoff volume captured (passing through the device) for a given inflow capacity. For storage-limited devices, results are presented in two forms: percentage of annual runoff volume captured as a function of unit basin size and drawdown (drain) time, and as a percentage of total suspended solids captured, for the same two variables. Regional differences are apparent, driven mainly by variations in rainfall patterns around the country.     

Criteria for evaluation of the hardening factor of machine parts

V. Ya. Chubar' Zaporozhe Machine Building Institute. Translated from Problemy Prochnosti, No. 3, pp. 62–65, March, 1989.     

Dynamics of the nitrogen transformation in a shallow stream and possible interventions.

This paper presents the assessment of the efficiency of the main biological nitrogen transformation processes in a shallow well-oxygenated river and conditions under which they are active and stabilise. The process dynamics was studied with the help of mathematical modelling of 2 years on-line data series measured in a reach of the Toess River, Switzerland. The algal nitrogen uptake was very stable and unaffected by most but frequent flood events. Daylight photosynthetic nitrogen uptake stabilised at 6 mgN mstreambed(-2) h(-1) (15 degrees C), dark uptake on storage products at rates of 0.5-2.5 mgN mstreambed(-2) h(-1). Nitrogen uptake by heterotrophic bacteria in the hyporheic zone was relatively constant at a level of 1.5-3.5 mgN mstreambed(-2) h(-1). Streambed nitrification could establish only during periods with average an daily concentration of at least 0.3 g(NH4-N) m(-3) in river water for several weeks. The maximum nitrification rate was 35 mgN mstreambed(-2) h(-1) for 3 g(NH4-N) m(-3). The effects of reduced nitrification in the WWTP and of river banks shading on a sudden ammonium peak were simulated. A river reach endangered by ammonium spills should be kept open to sun to favour ammonium uptake by algae. In-stream nitrification reduces ammonium peaks efficiently but leads to toxic nitrite concentrations.     

Quantum Critical Ferromagnetism in Ni x Pd1- x Alloys

We analyze the non-Fermi liquid behavior in the proximity of the quantum phase transition induced by the strong polarization of the electrons due to local magnetic moments in Ni _x Pd_1-x alloys. We use the renormalization group approach introduced by Hertz–Mi11is–Moriya (HMM) to estimate the temperature dependence of the electrical resistivity for the case of three dimensional itinerant ferromagnets. We study two different cases, namely, the clean and disordered ferromagnets, and argue that at the present time more experimental data are needed to decide if the HMM theory can accurately describe the physical properties in Ni _x Pd_1-x alloys.     

Textural Transitions in a Rotating Slab of 3He-A

The operation of a torsional oscillator for detection, of flow-driven textural transitions in, ³He-A is described. The detection technique, tracking the shift of the resonant frequency of the torsional oscillator, allows us to observe textural changes and the presence of vortices in zero magnetic field. It relies on. the anisotropic superfluid density of ³He-A and its change due to reorientation of the Î-texture caused by counterflow.     

High-strain-rate superplasticity of nanocrystalline aluminum alloy 1570

The structure and mechanical properties of nanocrystalline aluminum alloy 1570 obtained by means of severe plastic deformation have been studied. Being tested in a temperature range from 300 to 400°C, the alloy exhibits high-strain-rate superplasticity. At 400°C, the superplasticity is manifested in a very broad range of strain rates, extending from 5 × 10^?3 to 1 s^?1.