搅拌摩擦加工(FSP)AZ91D镁合金的组织分析

研究了AZ91D镁合金经搅拌摩擦加工后的组织。发现组织中搅拌摩擦区、热机械影响区和热影响区分区不明显。在搅拌摩擦区主要为再结晶形成的细小均匀的等轴晶结构,共晶组织α-Mg β相(Mg17Al12)完全均匀化,仅在晶界处有少量存在。     

盐浴硫氮碳共渗45钢的接触疲劳性能

对４５钢经盐浴硫氮碳共渗处理的大批试样，进行了滚子接触疲劳性能试验，绘出了Ｐ－Ｓ－Ｎ曲线，分析了接触疲劳断口形貌及破坏机理。     

La0.6Sr0.4Co1-yFeyO3钙钛矿复合氧化物的结构与电学性能

采用固相反应法合成出La0.6Sr0.4Co1-yFeyO3体系复合氧化物样品，XRD分析结果证实不同Co／Fe比例的样品中均形成菱形六面体钙钛矿结构，采用固相烧结法制备出致密的La0.6Sr0.4Co1-yFeyO3体系陶瓷。研究结果表明，在室温到900℃温度范围内La0.4Sr0.4CoO3(y=0)的电导率随温度的增加而单调降低，其它Co／Fe比例样品的电导率随着温度的增加出现最大值，电导率达到最大值的温度随Co／Fe比例的降低而提高。在低温段，La0.6Sr0.4Co1-yFeyO3体系的导电行为符合小极子导电机制，导电活化能随Co／Fe比例的降低而增加。     

La0．8Ca0．2CrO3钙钛矿复合氧化物的GNP法合成与表征

采用GNP（Glycine-Nitrate Process）法合成La0.8Ca0.2CrO3初级粉料，研究甘氨酸用量对产物的晶体结构和显微形貌的影响，并测试烧结体的相对密度和电导率。研究结果表明，甘氨酸与金属离子的摩尔比（G／M^n＋）控制在2．0～2．5时可得到颗粒尺寸细小、均匀（100nm～200nm）的单相钙钛矿粉体，烧结温度为1350℃时样品的相对密度达到91．0％，测试温度为800℃时样品的电导率达到30．5S.cm^-1。与常规固相法相比，GNP法制备的样品具有更好的烧结活性和导电性能。     

Nanostructured component fabrication by electron beam-physical vapor deposition

Fabrication of cost-effective, nano-grained net-shaped components has brought considerable interest to Department of Defense, National Aeronautics and Space Administration, and Department of Energy. The objective of this paper is to demonstrate the versatility of electron beam-physical vapor deposition (EB-PVD) technology in engineering new nanostructured materials with controlled microstructure and microchemistry in the form of coatings and net-shaped components for many applications including the space, turbine, optical, biomedical, and auto industries. Coatings are often applied on components to extent their performance and life under severe environmental conditions including thermal, corrosion, wear, and oxidation. Performance and properties of the coatings depend upon their composition, microstructure, and deposition condition. Simultaneous co-evaporation of multiple ingots of different compositions in the high energy EB-PVD chamber has brought considerable interest in the architecture of functional graded coatings, nano-laminated coatings, and design of new structural materials that could not be produced economically by conventional methods. In addition, high evaporation and condensate rates allowed fabricating precision net-shaped components with nanograined microstructure for various applications. Using EB-PVD, nano-grained rhenium (Re) coatings and net-shaped components with tailored microstructure and properties were fabricated in the form of tubes, plates, and Re-coated spherical graphite cores. This paper will also present the results of various metallic and ceramic coatings including chromium, titanium carbide (TiC), titanium diboride (TiB₂), hafnium nitride (HfN), titanium-boron-carbonitride (TiBCN), and partially yttria stabilized zirconia (YSZ) TBC coatings deposited by EB-PVD for various applications. This paper was presented at the International Symposium on Manufacturing, Properties, and Applications of Nanocrystalline Materials sponsored by the ASM International Nanotechnology Task Force and TMS Powder Materials Committee, October 18–20, 2004, Columbus, OH.     

等离子原位合成Ni-Al金属间化合物涂层的组织与性能研究

利用等离子激发原位反应在碳钢表面合成了Ni-A1金属问化合物涂层。借助金相显微镜、扫描电镜、X射线衍射仪和显微硬度计对涂层的组织和性能进行了研究。结果表明：当Ni和Al的质量百分比为4：1时，涂层与基体呈冶金结合，无裂纹和气孔等缺陷；涂层的主要组成相为NiAl和NiAl；涂层组织为细密的树枝晶；涂层的硬度高于基体，硬度可达630HV；涂层耐蚀性能良好。     

逆向工程中的一种编号点及其识别方法

对机械逆向工程中运用到的一种点的编码方式进行了简单的阐述和特征化，并详细介绍了运用区域搜索进行目标分割以及运用查找特性表并结合矩不变量的一种识别的算法。     

The distribution of grain boundary planes in polycrystals

During the last ten years, techniques have been developed to measure the distribution of grain boundaries in polycrystals as a function of both lattice misorientation and grain boundary plane orientation. This paper presents a brief overview of the techniques used for these measurements and the principle findings of studies implementing these techniques. The most significant findings are that grain boundary plane distributions are anisotropic, that they are scale invariant during normal grain growth, that the most common grain boundary planes are those with low surface energies, that the grain boundary populations are inversely correlated with the grain boundary energy, and that the coincident site lattice number is a poor predictor of the grain boundary energy and population.     

The atomic age challenge to steel

Some months ago the submarine Nautilus was in dock for refueling. It had traveled 60,000 miles, but the total uranium used would make a lump smaller than a light bulb. This is only one example that the Atomic Age is here with us, now! How and where does this incredible Atomic Age challenge the first and greatest of America’s basic industries?     

Ce对共晶Mg-Al合金组织的影响

模拟AZ9l镁合金半固态液相凝固后期的成分，分析了共晶成分镁铝合金添加不同含量的稀土元素Ce后，铸态显微结构的变化。结果表明：Ce的加入改变了合金的组织，增加了初晶α相的含量，细化了β相并减少了β相的含量。随着稀土Ce加入量的增加，在Ce的加入量为0．6％时，所得的组织最好；在Ce含量大于0．6％时，随着Ce加入量的增加，细化效果反而变差。