石材成型爆破开采方法简介

本文介绍了一些国内原有的及近年来发展的用于石材开采的成型爆破方法,简单扼要地阐明了这些方法的原理、装药结构及主要特点,对全面认识及合理选择这些方法有一定帮助。     

A unified approach for the analysis of grating-assisted couplers

Two coupled-mode theories based on individual waveguide modes and compound system modes, respectively, are briefly reviewed with proper modification and new comments. The relation between these two theories is built and it is found that one theory is actually an efficient approximation of the other. Also, the reason why the results obtained with the first more accurate than those obtained with the second is found. The constraint on both approaches is shown     

Studies on compounds of cancer chemoprevention: synthesis of some amides

In search for cancer chemoprevention agents, seven new amide compounds have been synthesized. The structures have been determined based on spectral and chemical data. N-4-(ethoxycarbophenyl)-alpha-naphthamide and N-4-(ethoxycarbophenyl)-beta-naphthamide were shown to be 81% and 79% effective, respectively, for inducing different in HL-60 human promyelocytic leukemia cells at the concentration of 10(-5) mol/L in NBT tests.     

峒室爆破CAD设计方法研究

本文对峒室爆破断面布药计算机辅助设计参数驱动方法进行了探讨围绕断面布药主要参数的变化，提出一种基于参数驱动的计算机辅助设计方法，利用ｗｉｎｄｏｗｓ操作系统下的动态数据交换特性，对断面布药进行布药参数优化，实现了交互调整布药，形成一套断面布的计算机软件，为工程爆破设计实现计算机提供了一种可行的方法。     

晶须取向对SiCw／Al复合材料切削表面质量的影响

切削与晶须取向方向间的夹角对ＳｉＣｗ／Ａｌ复合材料切削表面质量有很大影响。当切削角为４５°时，晶须拔出和转动现象均较少，复合材料切削表面粗糙度最低。当切削角为１３５度时，晶段转动造成的撕裂破坏程度很大，复合材料切削表面粗糙度最大。     

Primary sternal osteomyelitis presenting as a pleural-based mass

Osteomyelitis in uncommon locations can present unusual diagnostic difficulties. A patient with primary sternal osteomyelitis who presented with pain over the right supraclavicular area and a radiologic picture of a pleural-based right upper lung mass is discussed. A triple-phase bone scan was consistent with the diagnosis, and a needle aspiration of the mass revealed a staphylococcal abscess. Percutaneous drainage of the contiguous abscess and a prolonged course of antibiotic therapy cured the infection.     

丙烯酸酯单体对聚氯乙烯密封胶粘剂的改性作用

丙烯酸酯有较大的反应活性，能与聚氯乙烯发生接技共聚反应。本文中，我们着重研究不同结构丙烯酸酯单体对聚乙烯基密封胶粘剂的改性作用。以PVC为100份，分别加入甲基丙烯酸一缩二乙二醇双脂（DEGDMA），甲基丙烯酸乙二醇双酯（EGDMA）和丙烯酸一缩二乙二醇双酯（DEGDA）各为10份、20份、30份的试验结果看出，随着丙烯酸酯单体添加量的增加，PVC片基的硬度增大，拉伸强度提高，而伸长率降低。不同的单体其影响也不同。就硬度和拉伸强度有EGDMA＞DEGDA＞DEGDMA的规律伸长率的降低则为DEGDMA＞DEGDA＞EGDMA。就丙烯酸…     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。     

军用滑木箱的设计分析

介绍了按日本标准设计的横板式和国内竖板式军用滑木箱的结构设计参数，从木箱抗弯、抗静压及顶盖抗弯三方面对比了两种木箱的力学性能，分析了两种木箱的特点及适用范围。