Fe3O4@TiO2@SiO2@Ag光催化剂的制备及其光催化活性研究

采用溶剂热法和溶胶-凝胶法合成了磁性Fe₃O₄@TiO₂@SiO₂复合光催化剂,再通过巯基改性,使二氧化硅表面原位合成银纳米颗粒,最终形成目标光催化剂。利用XRD、FT-IR、XPS、SEM、VSM等分析测试手段对该催化剂的组成、结构、形貌及其磁学性能进行表征。通过光催化降解40 mL罗丹明B溶液(pH 5.3,30 mg/L),催化剂按1 g/L加入反应体系,光照120 min时,罗丹明B溶液的降解率达96.22%。相同条件重复循环实验10次,罗丹明B溶液降解率仅下降4.32%,表明Fe₃O₄@TiO₂@SiO₂@Ag磁性光催化剂具有出色的光催化活性和循环使用性。     

德国雷姆公司的MEGAPULS系列数控双脉冲焊机的特点

德国雷姆焊接技术有限公司是专业生产MIG／MAG气体保护焊机、TIG焊机和等离子切割机的专业公司，拥有100多名员工。其中设计人员近30名，约占公司人员总数的25％。该公司十分重视产品的技术进步和技术创新工作，因此，产品技术升级换代的循环周期比较短。     

Nd60Al10Fe20Co10金属玻璃的变形行为

利用材料测试系统(MTS)、X-Ray衍射(XRD)和扫描电镜(SEM)等手段研究了Nd基大块金属玻璃的变形行为和断裂特征.Nd基大块金属玻璃样品在室温下是脆性断裂,大约在500 K时变形模式从非均匀变形转变为均匀变形,在523 K以上表现出显著的塑性变形.在5×10-4 m/s的应变速率下,这种Nd基大块金属玻璃材料在523 K～600 K之间出现明显的屈服应力下降现象,随后进入1种稳定的粘性流动状态,而且这种屈服下降现象与温度和应变速率有关.这种在过冷液相区的变形行为与其他大块金属玻璃变形特征相似.合金的这种塑性变形行为表明了其存在稳定的过冷液相区,同时对其变形行为的研究有助于进一步了解Nd基大块金属玻璃的反常热稳定性.     

铂族元素的协同萃取

介绍协同萃取用于铂族元素富集与分离的进展状况。     

采用12Cr1MoV转炉钢生产高压锅炉钢管

介绍了转炉冶炼高压锅炉管钢工艺和采用12Cr1MoV 转炉钢生产的高压锅炉钢管性能。性能试验表明,转炉钢可以用于高压锅炉钢管生产,其实物质量与电炉钢相当。     

The design and test of dual/triple‐mode bandpass filter based on temporal coupled‐mode theory

In this article, the design and test of both a K‐band dual‐mode bandpass filter (BPF) pair and a K‐band triple‐mode BPF are presented based on N‐mode temporal coupled‐mode theory (CMT). The expressions of transmission and reflection responses are analytically derived. All the parameters in the expressions have clear physical meanings and are easily optimized to reach the required filter performance. Aided by eigenmode simulations, concrete structures of the three integrated BPFs are designed and optimized to approach the calculated physical parameters. After the fabrications and measurements of the three BPFs, extended upper/lower stopband with high stopband rejections are achieved, and by increasing the number of resonant modes, improved frequency selectivity and better passband flatness are obtained. The analytical analysis well predicts the simulation and measurement results, which provides an efficient way for BPF designs. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:609–622, 2016.     

四川盆地含膏盐红层特征及坝基工程地质问题(Ⅱ)

本文探讨了四川盆地含膏盐红层类岩溶作用引起的坝基工程地质问题,首先是地下水化学成分的改变及其对水工结构混凝土的腐蚀作用及坝基渗漏问题,然后确定了表征类岩溶作用强度的类岩溶强度因子(k).最后,通过类岩溶岩体Vp与主要岩体工程力学指标,诸如:允许承载力fak、抗剪(断)摩擦系数f(f')、变形模量(E0)的回归关系,探讨了类岩溶作用对坝基岩体弱化的作用.     

求解泊松方程的紧致修正法

将紧致格式与低阶格式结合,构造紧致格式的修正项,并将修正项加入到源项中进行求解,得到了一种基于非均分网格求解泊松方程的紧致修正法,且将该方法应用于二维和三维泊松方程的数值求解中。数值计算结果表明:紧致修正方法的精度高于经典方法的精度,但四阶紧致修正方法比二阶经典方法对网格的依赖性强。     

Development of a quadruped walking robot AiDIN-III using biologically inspired kinematic analysis

This paper presents a bio-inspired mechanism design for a quadruped walking robot. The approach is derived from the observation on the behaviors of quadruped locomotion, skeletal structure, and the study on the stability of walking based on morphological analysis. In the first, we define the design parameters such as the dimensions of the body and limbs, the center of mass position, and locomotion mechanisms based on surveys on the literatures from biologists. Then, by using the parameters, we propose an useful framework for determining the design parameters of a quadruped walking robot. For implementations, we manufacture a dog-type self-contained quadruped walking robot, named AiDIN-III (Artificial Digitigrade for Natural Environment version III) and the effectiveness of the proposed idea is validated via experimental works.