Effects of steam dilution on laminar flame speeds of H2/air/H2O mixtures at atmospheric and elevated pressures

The laminar flame speeds of H₂/air with steam dilution (up to 33 vol%) were measured over a wide range of equivalence ratio (0.9–3.0) at atmospheric and elevated pressures (up to 5 atm) by an improved Bunsen burner method. Burke, Sun, HP (High Pressure H₂/O₂ mechanism), and Davis mechanisms were employed to calculate the laminar flame speeds and analyze different effects of steam addition. Four studied mechanisms all underestimated the laminar flame speeds of H₂/air/H₂O mixtures at medium equivalence ratios while the Burke mechanism provided the best estimates. When the steam concentration was lower than 12%, increasing pressure first increased and then decreased the laminar flame speed, the inflection point appeared at 2.5 atm. When the steam concentration was greater than 12%, increasing the pressure monotonously decrease the laminar flame speed. The chemical effect was amplified by elevated pressure and it played an important role for the inhibiting effect of the pressure on laminar flame speed. The fluctuations of the chemical effect at 1 atm were mainly caused by three-body reactions, while the turn at 5 atm was mainly caused by the direct reaction effect. Elevated pressure and steam addition amplified the influences of uncertainties in the rate constants for elementary reactions, which might leaded to the disagreement between experimental and simulation results.     

Lignin-based Hydrogels for Biological Application

Lignin is the most abundant aromatic compound found in nature.The rich functional groups of lignin are responsible for its antibacterial,antioxidant, anti-ultraviolet, and biocompatible properties. As modified lignin has a higher molecular weight, water solubility, and better surface activity, it is a good candidate for the construction of new biological materials. Ligninbased hydrogels are a type of functional materials with broad application prospects in the biomedical field. This review aimed...     

Facile Fabrication of Cellulosic Paper-based Composites with Temperature-controlled Hydrophobicity and Excellent Mechanical Strength

In this paper,we presented a novel strategy to employ a plantderived carbohydrate polymer,i.e.,cellulose,to prepare a hydrophobic composite.Cellulose was used as a scaffold,and ethylene-propylene side by side(ES)fiber was thermally melted and then coated on the cellulose surface to achieve hydrophobicity.Experimental results revealed that the thermocoating ES fibers greatly increased the water contact angle of the cellulose scaffold from 25°to 153°while simultaneously enhanced the wet tensile strength of the composite approximately 6.7-fold(drying temperature of 170℃)compared with the pure cellulose paper.In particular,compared with other related research,the prepared cellulose-based composite possessed excellent hydrophobicity and superior mechanical strength,which introduces a new chemical engineering approach to prepare hydrophobic cellulose-based functional materials.     

海水淡化用空心锥喷嘴喷淋性能理论及实验研究

设计开发一种具有高通量、低流阻特征的空心锥喷嘴,并通过理论与实验方法研究空心锥喷嘴的喷淋性能,基于准自由涡理论建立空心锥喷嘴内部流体流动的数学模型,阐明流量系数、喷淋锥角、喷嘴流量与喷嘴结构参数之间的定量关系,并利用多效蒸馏海水淡化喷淋实验台对理论计算结果进行实验测试和验证。研究结果表明:正常工作状态下喷嘴流量系数、喷淋锥角、喷淋流量等参数理论值与测量值之间的误差小于5%,验证了设计模型的准确性。同时根据实验测试数据,拟合得到该类型空心锥喷嘴喷淋锥角与雷诺数之间的经验公式,可为蒸馏海水淡化用大流量空心锥喷嘴的结构设计、工艺选型提供理论指导和数据支持。     

浅析英法哥特建筑的发展

哥特式建筑于11世纪开始登上历史舞台,它在这个舞台上闪耀了8个世纪,也影响了整个欧洲乃至全世界的建筑风格。文章就英法两国哥特式建筑风格在不同历史背景下的发展和形成原因进行对比分析,并挖掘其历史成因和文化内涵。     

正交试验优化转杯纺织物浆纱工艺的实践

为解决高紧度转杯纺织物织造断经多、打纬阻力大、易出波纹疵点等问题,分析了该类品种的生产难点,并以十万纬断经数和波纹疵点为指标通过正交试验对浆液黏度、压浆力、浆纱车速、浆纱回潮率、浆纱伸长和卷曲张力进行了优化,最终织机效率达87％以上,波纹疵点得到明显减少.认为:优选浆纱工艺是解决该类产品生产质量问题的关键.     

Influence of pore structure on the gravity separation performance of fine lignite

Influence of lignite porosity on the density fluctuation and subsequent beneficiation efficiency was studied. Using copper as tracer element, SEM+EDS was used to study the wetting rate of medium to particles. Furthermore, the particle quality changes before and after the wetting was analyzed. Separation experiments were carried out to verify the hypothesis. Results show that the wetting process is less than three seconds and there is no significant relationship between the quality growth rate and the particle density, which leads to the irregular change of particle density. Separation experiment proved the low separation efficiency and high content of mismatch particles.