阶段时间对CMICAO工艺低温运行特性的影响

研究了低温下多点交替进水阶式A2/O(CMICAO)工艺阶段运行时间对污染物去除率的影响,探讨了DO、ORP以及pH状态参数与污染物去除率之间的关系。结果表明,水温8~10 ℃,泥龄13 d,水力停留时间16 h,污泥浓度2 680~3 560 mg/L,污泥回流比30%,阶段1至6的运行时间为3、2.5、2、3、2.5、2 h时,工艺出水TN、氨氮、NO3--N和TP浓度的平均值分别为10.1、1.1、7.4和0.8 mg/L。硝化反应结束时,pH由下降转为上升,ORP上升趋于平缓,DO上升趋缓;反硝化结束时,ORP曲线明显跌落,pH由上升趋于平缓并略有下降;释磷结束后ORP曲线由下降趋于平缓。降低前好氧池DO浓度,有助于同步硝化反硝化作用的发生,从而提高脱氮效率,节省能耗。     

火灾后方钢管钢筋混凝土短柱承载力分析

在确定了ISO-834标准火灾作用后钢材和混凝土应力应变关系的基础上,首先利用ABAQUS有限元软件建立火灾作用后方钢管钢筋混凝土短柱温度场及力学分析模型,计算结果得到以往试验结果验证。然后分析了截面边长、配筋率、受火时间、含钢率、材料强度等参数对火灾作用后钢管钢筋混凝土短柱承载力的影响规律,结果表明,受火时间、截面边长是影响其承载力的主要因素。最后提出了火灾作用后方钢管钢筋混凝土短柱承载力的理论公式, 为其灾后修复和加固提供参考。     

Numerical investigation of the mechanical component design of a hexacopter drone for real-time fine dust monitoring

Journal of Mechanical Science and Technology - Multi-rotor unmanned aerial vehicles (UAVs) are being widely used in various military and civilian fields because they can replace manned systems in...     

A study on the fracture characteristics of tapered double cantilever beams made of heterogeneous composites with adhesive interfaces

Journal of Mechanical Science and Technology - In this study, CFRP and aluminum properties were investigated by carrying the static experiment on the shape-dependent bonding structure, and designed...     

井下通风网络分析与方案优化

为解决传统矿井通风系统无法满足矿井扩产需求,在以老矿井为例分析其通风现状的基础上,对当前井下通风系统进行测定和评价,并针对其所存在的问题初步提出整改建议;最后,在上述分析的基础上对工作面的需风量进行重新核算,并提出三套优化方案,最终确定方案二为最佳方案.     

考虑负荷释放过程的配电网网架结构经济性计算模型

当前配电网网架建设多以规划期末年负荷水平进行规划,忽略了负荷发展的动态过程,容易造成配电网超水平建设,导致设备利用率低、投资时效不足等问题.针对此问题,定义了负荷释放概念,提出了一种考虑负荷释放过程的配电网网架结构经济性计算模型,该模型考虑了负荷释放过程中配电网动态的运行网络损耗和停电损失,从规划期整体出发,对配电网网架结构经济性进行定量评估.运用实际地区线路进行算例仿真,仿真结果表明,该模型可以有效评估不同网架发展过程中,配电网建设的经济性.     

Thermal stability,flame retardance,and mechanical properties of polyamide 66 modified by a nitrogen–phosphorous reacting flame retardant

Flame‐retardant polyamide 66 (PA66) was prepared by the polymerization between PA66 prepolymer and N‐benzoic acid (ethyl‐N‐benzoic acid formamide) phosphamide (NENP). Compared with the pure PA66, the flame‐retardant PA66 exhibited better thermal stability, as indicated by thermogravimetric analysis results. The limiting oxygen index was 28% and the UL‐94 test results of the flame‐retardant PA66 indicated a V‐0 rating when the content of the NENP prepolymer was 5 wt %. The flammability and flame‐retardant mechanism of PA66 were also studied with cone calorimetry and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy, respectively. The mechanical properties results show that the flame‐retardant PA66 resin had favorable mechanical properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43538.     

Non-vacuum sintering process of WC/W2C reinforced Ni-based coating on steel

Ni-based composite coatings containing varied contents of tungsten carbides on low carbon steel were fabricated. Effects of sintering temperature and tungsten carbides contents on the surface, interface, microstructure and wear resistance of the coatings were investigated using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Vickers microhardness tester, bulk hardness tester and pin-on-disc tribometer. The results indicated that with appropriate sintering temperature (1230 °C), smooth coating surfaces can be achieved. Favorable interfaces about 200 μm can be got that both the chemical composition and property of the interfacial region showed gradual transitions from the substrates to the coatings. Microstructure of the coatings consists of tungsten carbides and M7C3/M23C6 in the matrix. With excessive sintering temperature, tungsten carbides tend to dissolve. Ni-based coatings containing tungsten carbides showed much higher level of bulk hardness and wear resistance than ISO Fe360A and ASTM 1566 steels. With increasing contents of tungsten carbides from 25% to 40%, bulk hardness of Ni-based coatings gradually increased. Ni-based coating with 35% tungsten carbides performed the best wear resistance.     

穿越型扩张式封隔器的研制与试验

渤海油田采用大段防砂完井,防砂段内小层多,地层非均质严重,层间矛盾突出,注水开发效果难以进一步提高。为了实现细分层系开发,除了防砂管柱外层与层封隔,还需要在防砂管柱内相应位置配合形成管内封隔。为了适应不同分层采油注水工艺措施,研制穿越型扩张式封隔器,介绍该封隔器的应用环境、结构、工作原理等,并对该封隔器进行了室内试验和现场试验。结果表明：穿越型扩张式封隔器能顺利实现外径 6.35 mm的管线穿越,无遇阻,所设置的保护功能可有效保护管线,能按要求顺利坐封、解封,中心打压16 MPa,上下环空承压均可达15 MPa,最大可满足 157.1 mm内径密封要求,满足现场不同应用环境的需求。