Morphology and Forming Mechanism of Rare Earth Inclusions During Solidification of Steel

ＭｏｒｐｈｏｌｏｇｙａｎｄＦｏｒｍｉｎｇＭｅｃｈａｎｉｓｍｏｆＲａｒｅＥａｒｔｈＩｎｃｌｕｓｉｏｎｓＤｕｒｉｎｇＳｏｌｉｄｉｆｉｃａｔｉｏｎｏｆＳｔｅｅｌ￥ＺｈａｉＱｉ－Ｊｉｅ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｔａｌｌｕｒｇｙ，ＵｎｉｖｅｒｓｉｔｙｏｆＳ...     

Speed–accuracy tradeoff in Fitts’ law tasks—on the equivalency of actual and nominal pointing precision

Pointing tasks in human–computer interaction obey certain speed–accuracy tradeoff rules. In general, the more accurate the task to be accomplished, the longer it takes and vice versa. Fitts’ law models the speed–accuracy tradeoff effect in pointing as imposed by the task parameters, through Fitts’ index of difficulty (I_d) based on the ratio of the nominal movement distance and the size of the target. Operating with different speed or accuracy biases, performers may utilize more or less area than the target specifies, introducing another subjective layer of speed–accuracy tradeoff relative to the task specification. A conventional approach to overcome the impact of the subjective layer of speed–accuracy tradeoff is to use the a posteriori “effective” pointing precision W_e in lieu of the nominal target width W. Such an approach has lacked a theoretical or empirical foundation. This study investigates the nature and the relationship of the two layers of speed–accuracy tradeoff by systematically controlling both I_d and the index of target utilization I_u in a set of four experiments. Their results show that the impacts of the two layers of speed–accuracy tradeoff are not fundamentally equivalent. The use of W_e could indeed compensate for the difference in target utilization, but not completely. More logical Fitts’ law parameter estimates can be obtained by the W_e adjustment, although its use also lowers the correlation between pointing time and the index of difficulty. The study also shows the complex interaction effect between I_d and I_u, suggesting that a simple and complete model accommodating both layers of speed–accuracy tradeoff may not exist.     

天康面粉公司制粉车间局部技改介绍

山东巨野国家粮食储备库天康面粉公司制粉车间始建于2000年,设计能力为处理小麦100t/d.主要设备有FMFQ10×2/6×2磨粉机8台,FS-FG6×24C高方筛3台,FQFD50×2×3清粉机2台,磨辊总接触长度12000 mm,平筛总筛理面积138.8 m2,单位磨辊接触长度12 mm/(100kg·d),单位平筛筛理面积0.14 m2/(100kg·d).麦间清理工艺(包括初清)为4筛2打2去石3磁选2着水,粉间工艺为488M1S2T4P3Br.     

变频器在恒压供水上的应用

简要介绍了JP6C—AP1变频器的特点及在恒压供水上的应用。     

二维卡尔曼─中值混合自适应滤波

本文提出了能同时抑制加性噪声，脉冲噪声干扰和点扩展函数模糊，又能保护图象边缘及细节信息的新型滤波方法—“二维Kalman－Median混合自适应滤波”，并成功地应用于统计图象恢复，取得了满意的效果。     

有机锡类农药——三唑锡液相色谱分析

用高效液相色谱分析农药三唑锡,采用强阳离子交换柱,甲醇、水、冰醋酸作流动相以及紫外检测器。结果表明,此法分离效果好,准确度和精密度高,可用于三唑锡生产控制及原药、各种制剂(粉剂、胶悬剂)产品分析。     

在西文DOS下汉字的一种快速显示技术

作为存储测试系统配套的信息处理软件,有一个直观的汉字界面显的非常必要,本文介绍一种在西文DOS下快速显示汉字的处理技术:由信息处理软件原程序中的汉字信息通过访问硬盘汉字库生成,由所需显示汉字点阵构成具有专用格式的专用汉字库,通过软件编程可实现对汉字库的快速访问与快速显示。从而,即节省磁盘空间,又能使信息处理软件与汉字显示很好地溶为一体。     

利用天然地震震源点确定活动断裂深部延伸性状的尝试

本文首先运用卫星影像,对临汾—运城盆地中主要活动断层的平面展布状况进行了解译。在此基础上,利用天然地震震源点的三维生标,探索性地研究与确定了各条断层的深部延伸性状,建立起了盆地内断裂构造的三维格架。主要结论有:(1)边缘断裂多数是深达莫霍面的(38km)伸展性铲形断裂;(2)霍山西麓山前大断裂的深部延伸为直立状,深度达莫霍面(38km)。(3)盆地内的其它断层多数是铲形断层的对偶断层,产状为倾斜状,与铲形断层相遇后而终止,延伸深度一般不超过30km;(4)区内存在4个水平滑脱面(或层),其深度分别为4.5～5.5km,9.5～10.5km,18.5～20.5km,35.5～37.5km,这些面(或层上)震源点分布较密集;(5)区内北部、中部、南部,断层组合形式稍有差别,并控制、形成了不同的地貌形态。     

面向高端装备制造CAE技术的机遇和挑战

针对高端装备制造在设计、分析、制造、服役和维护等全过程中对CAE的需求,从结构、流体以及流固耦合等3个方面概述CAE技术国内外进展及其面临的机遇和挑战,指出在发展具有能够对装备在极端服役环境下准确的结构、流体和流固耦合CAE分析技术的基础之上,需不断突破面向工程应用的多物理场耦合、跨尺度分析、多学科综合设计、产品性能评估和集成等关键技术,使CAE逐步向支持现代设计和全寿命周期管理转变.