Light-Wavelength-Based Quantitative Control of Dihydrofolate Reductase Activity by Using a Photochromic Isostere of an Inhibitor

Photopharmacology has attracted research attention as a new tool for achieving optical control of biomolecules, following the methods of caged compounds and optogenetics. We have developed an efficient photopharmacological inhibitor—azoMTX—for Escherichia coli dihydrofolate reductase (eDHFR) by replacing some atoms of the original ligand, methotrexate, to achieve photoisomerization properties. This fine molecular design enabled quick structural conversion between the active “bent” Z isomer of azoMTX and the inactive “extended” E isomer, and this property afforded quantitative control over the enzyme activity, depending on the wavelength of irradiating light applied. Real-time photoreversible control over enzyme activity was also achieved.     

Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Autonomous Variable‐Resolution Map Building for Mobile Robots in Unknown Environments

This paper presents a method that allows simultaneous map building and path planning for mobile robots in unknown environments. A graphical representation of a workspace in variable resolutions is constructed using measurement data obtained by omnidirectional distance sensors. At the same time, a search for a feasible path to the target destination is executed using the constructed graph map. The proposed method is evaluated by performing simulations and experiments using an omnidirectional mobile robot equipped with laser range finders. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 59–69, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22493     

Operation Assist by Vibration Suppression Control Using Impulse‐Shaped Signals for Power Assist Conveyance System

This paper presents an assist control method for a flexible parts conveyance task using a power assist conveyance system. The assist control method should be designed so as not only to suppress vibration but also to reduce the degradation of operating feel. For this purpose, multiple impulse‐shaped signals are used as feedforward signals in order to reduce the vibration of flexible parts during conveyance. In addition, the adjustment time is introduced to adjust the input timing of the impulse‐shaped signal and to suppress vibration. In order to improve the degradation of operating feel, the smaller amplitudes of the three impulse‐shaped signals are used and input repeatedly. The effectiveness of the proposed system was verified experimentally. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(2): 31–39, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22476     

An order acceptance strategy under limited engineering man-hours for cost estimation in Engineering–Procurement–Construction projects

Accurate cost estimation is essential for any Engineering–Procurement–Construction (EPC) contractor accepting profitable projects because the project price is determined prior to receiving the contract. Therefore the contractor needs to ensure engineering man-hours (MH) in order to estimate project costs accurately as well as carry out the accepted orders. In this paper, we develop MH based order acceptance strategies and investigate their effects on the total expected profit through a long-term operation in EPC projects under a competitive bidding situation. To this end we build a simulation model describing relations among the volume of MH for cost estimation, accepted orders, revenues, and profits in EPC projects. Using our model, we show that the strategy, which maintains the appropriate balance of MH for cost estimation and project execution under the variability of accepted orders with competitive bidding situations, improves the total expected profit in EPC projects.     

Polycrystalline behavior analysis of pure magnesium by the homogenization method

In this study, mechanical behaviors of pure magnesium polycrystals are numerically investigated. The homogenization method, which combines the crystal and macroscopic scales, is introduced to include the effect of crystalline scale behaviors. The polycrystal plasticity model modified for pure magnesium, in which twinning is considered as asymmetric slip-like deformation, is utilized as a constitutive equation. Within this framework, numerical convergence analyses are conducted, and a representative volume element to present realistic deformation of pure magnesium is investigated. Second, polycrystalline behaviors of pure magnesium are investigated. The present approach is shown to reproduce the typical phenomena induced by crystalline scale structure in pure magnesium: nonuniform strain distribution, asymmetric crystal lattice orientation, strength differential effect, and strongly anisotropic initial and subsequent yield surfaces.     

Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.