Thermal response in thermal energy storage material around heat transfer tubes: effect of additives on heat transfer rates

The effects of carbon-fiber chips and carbon brushes as additives on the thermal conductivity enhancement of phase change materials (PCMs) using in latent heat thermal energy storage are investigated experimentally and numerically by considering the wall effect of the additives. The carbon-fiber chips are effective for improving the heat transfer rate in PCMs. However, the thermal resistance near the heat transfer surface is higher than that for the carbon brushes. As a result, the overall heat transfer rate for the fiber chips is lower than that for the carbon brushes. Consequently, the carbon brushes are superior to the fiber chips for the thermal conductivity enhancement under the present experimental conditions. The carbon brushes are moreover applied to the packed beds of particles to overcome their low thermal conductivity in chemical heat pump/storage. The carbon brushes essentially improve the heat transfer characteristics in the packed beds, though the thermal resistance is observed because the particles obstruct contact between the fibers and the heat transfer surfaces.     

QUADRANT ANALYSIS OF BUBBLE INDUCED VELOCITY FLUCTUATIONS IN A TRANSITIONAL BOUNDARY LAYER

Our previous study showed that the frictional drag decreases with increasing void fraction at Re > 1300, while it increases at Re < 1000. Decomposition of the Reynolds shear stress also implied that bubbles induce isotropy of turbulence. In order to confirm our previous analysis and to further investigate flow fields in the vicinity of bubbles, we analyze velocity fluctuations on the quadrant space in the streamwise and transverse directions ( u′ – v′ plane). Here, we focus on two specific Reynolds numbers ...     

Model for boiling explosion during rapid liquid heating

The process of rapid liquid heating with a linearly increasing boundary temperature condition has been simulated by applying the analytical solution of 1D semi-infinite heat conduction in association with the molecular theory of homogeneous nucleation boiling. A control volume having the size of a characteristic critical cluster at the liquid boundary is considered, and the corresponding energy balance equation is obtained by considering two parallel competing processes that take place inside the control volume, namely, transient external energy deposition and internal energy consumption due to bubble nucleation and subsequent growth. Depending on the instantaneous rate of external energy deposition and boiling heat consumption within the control volume, a particular state is defined as the boiling explosion condition in which bubble generation and growth cause the liquid sensible energy to decrease. The obtained results are presented in terms of the average liquid temperature rise within the control volume, maximum attainable liquid temperature before boiling explosion and the time required to achieve the condition of boiling explosion. The model is applied for the case of water heating at atmospheric pressure with initial and boundary conditions identical to those reported in the literature. Model predictions concerning boiling explosion are found to be in good agreement with the experimental observations. The boiling explosion condition as predicted by the present model is verified by comparing the heat flux across the liquid–vapor interface with the corresponding limit of maximum possible heat flux, q_max,max, at the time of boiling explosion. A comparative study between the actual heat flux and the limit of maximum heat flux, q_max,max, at the time of boiling explosion for different rates of boundary heating indicates that, with much higher boundary heating rates, it is possible to heat the liquid to a much higher temperature before theoretical instantaneous boiling explosion occurs.     

Growth and differentiation potentials in confluent state of culture of human skeletal muscle myoblasts

The transitional behaviors of myoblasts toward differentiation were investigated in the cultures at the low and high seeding densities (respectively, X₀ = 1.0 × 10³ and 2.0 × 10⁵ cells/cm²). In the culture at the low seeding density, an increase in confluence degree accompanied a decrease in growth potential (R_p), being R_p = 0.85 and 0.11 at t = 48 and 672 h, respectively. Myoblasts seeded at the high density resulted in the immediate cessation of growth with keeping the low range of R_p = 0.02–0.09 throughout the culture. The reduction of R_p led to the generation of three subpopulations of cells in proliferative, quiescent and differentiated states. Close cell contacts in the confluent state of high seeding culture induced cell quiescence to a higher extent with suppressing differentiation.     

A survey of perfluorooctane sulfonate and related perfluorinated organic compounds in water,fish, birds,and humans from Japan

Occurrence of perfluorooctane sulfonate (PFOS) in the tissues of humans and wildlife is well documented. In this study, concentrations and distribution of PFOS, perfluorohexane sulfonate (PFHS), and perfluorobutane sulfonate (PFBS) were determined in samples of surface water, fish and bird blood and livers, and human blood collected in Japan. Notable concentrations of PFOS were found in surface water and fish from Tokyo Bay. PFOS was found in all of the 78 samples of fish blood and liver analyzed. Based on the concentrations of PFOS in water and in fish livers, bioconcentration factors were calculated to range from 274 to 41 600. Concentrations of PFOS in the blood of Japanese human volunteers ranged from 2.4 to 14 ng/mL. PFHS was detected in 33% of the fishes analyzed, at concentrations severalfold less than those of PFOS.     

Characterization of a class III chitinase from Vitis vinifera cv. Koshu

A chitinase gene (Chi3K) was cloned from the genomic DNA of Vitis vinifera cv. Koshu. The structural gene comprised 891 by without introns and encoded 297 amino acids. The Chi3K product showed high similarity to the class III chitinase of V. vinifera cv. Pinot noir. Chi3K was expressed using a bacterial expression vector for purification and enzymatic characterization of its gene product. The recombinant chitinase exhibited hydrolytic activity toward glycol chitin and its optimum pH was 4.0. It also inhibited the growth of Botrytis cinerea, which causes grey mold disease in grapes.     

In vitro construction and screening of a Burkholderia cepacia lipase library using single-molecule PCR and cell-free protein synthesis

A mutant library of Burkholderia cepacia lipase KWI-56 was constructed on microplates by a cell-free process and tested with a chromogenic assay. This high-throughput construction system can be used to screen mutant proteins based on their catalytic activity.