基于红外遥感信息的煤矿车辆 异常行为检测研究

为了提升煤矿车辆异常行为检测水平,设计了基于红外遥感信息的煤矿车辆异常行为检测方法。该方法引入清晰度权重以及拉伸系数实现红外遥感图像中目标煤矿车辆部位的局部增强,利用均值漂移算法跟踪增强后的红外遥感图像中目标煤矿车辆,依据煤矿车辆跟踪结果提取煤矿车辆运动方向、运动速度以及运动方向3项异常行为检测参数,采用加权融合方法处理煤矿车辆异常行为检测参数的状态函数,融合结果高于所设定阈值时,煤矿车辆存在异常行为,否则煤矿车辆为正常行驶状态。实验结果表明,该方法可利用煤矿车辆位置、车辆行驶速度以及车辆方向变化检测煤矿车辆异常行为,具有较高的应用性。     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Activation of Mast-Cell-Derived Chymase in the Lacrimal Glands of Patients with IgG4-Related Ophthalmic Disease

The purpose of this present study was to investigate the distribution and expression of chymase in the lacrimal glands (LGs) of patients afflicted with IgG4-related ophthalmic disease (IgG4-ROD). LGs from patients with severe canalicular obstruction were considered the control group. Toluidine blue staining confirmed a significant increase in the number of mast cells in the LGs obtained from the IgG4-ROD patients. In addition, immunostaining of serial sections from the LGs showed a significant increase in the number of chymase-positive cells and tryptase-positive cells in the IgG4-ROD LGs compared to the normal control LGs. The mRNA expression of chymase, tryptase, TGF-β1, and collagen-I tended to increase in the IgG4-ROD LGs. Immunostaining of vimentin and α-smooth muscle actin (α-SMA) showed that myofibroblasts were the main cellular components in severely fibrotic regions of LGs in patients with IgG4-ROD. Linear regression analyses on the number of mast cells, chymase-positive cells, and tryptase-positive cells revealed significant positive correlations between those respective cells. Our findings suggest that chymase may play a role in the fibrotic disorder of IgG4-ROD LGs through the regulation of TGF-β1 activation and collagen-I deposition, and that it may be a therapeutic target for patients afflicted with IgG4-ROD.     

EFFECT OF FLUIDIZING PARTICLE ON DRYING CHARACTERISTICS OF POROUS MATERIAL IN FLUIDIZED BED

The drying characteristics of porous material in fluidized bed were examined theoretically and experimentally. The brick ball was used as the sample and immersed in the fluidized bed. The glass beads were used as the fluidizing particles and the particle diameters were changed. When the pore diameter of sample was relatively large, the fluidizing particles were adhered on the sample surface. In the theoretical analysis, the heat and mass transfers in adhered particle layer were considered. The fluidizing particles were adhered on the sample surface during the earlier period of drying. The sample temperature largely decreased when the mass of adhered particle decreased. The calculated results are in good agreement with experimental data. The diameter of fluidizing particle had a small effect on the drying time. The excess increments in drying gas temperature hardly contributed to shortening the drying time.     

EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.     

Synthesis of optical quality ZnO nanowires utilizing ultrasonic spray pyrolysis

ZnO nanowires were grown by an ultrasonic spray pyrolysis technique. The aspect ratio and size of the wire were dependent mainly on the pH value of a precursor solution and the growth temperature. By high-resolution transmission electron microscopic analysis and photoluminescence measurements, it was confirmed that the nanowires are monocrystalline with good optical quality.     

Molecular Dynamics Study of Atomic Structure and Diffusion Behavior in Amorphous Silicon Nitride Containing Boron

We have performed molecular dynamics simulations of amorphous Si₃N₄ containing boron (Si-B-N). We have examined short-range atomic arrangements and self-diffusion constants of amorphous Si-B-N systems with various boron contents. Our simulations show that boron atoms are threefold coordinated by nitrogen atoms and that nitrogen atoms are bonded to both silicon and boron atoms in the amorphous network of Si-B-N. Also, the self-diffusion constant of nitrogen in Si-B-N is much decreased compared with that in amorphous Si₃N₄. This suggests that boron is important in decreasing the mobility of atoms in amorphous Si-B-N, which may explain the improved thermal stability of amorphous Si-B-N relative to amorphous Si₃N₄ observed experimentally.     

不同的表面处理对针织碳纤维复合材料的影响分析(英文)

纤维复合材料已经研究了数十年了。他们有着比传统材料,如钢材,优秀的多的力学性能。然而,由于相对较低的产量,梭织、编织与其3D纤维结构的复合材料被认为较难大量生产。因此,近年来,针织物在复合材料界获得了较高的关注,它的高度可塑性使针织复合材料可以直接生产制造成各种复杂形状的复合材料如管状、圆锥型等,使得材料的浪费可以降到了最低。本文使用了有表面处理和没有表面处理的纬编平针碳纤维制成复合材料。对两种复合材料的经向和纬向分别做了拉伸试验。结果显示:有表面处理的材料具有更好的拉伸性能,尤其是在wale方向上,有表面处理的复合材料比没有表面处理的复合材料的拉伸强度提高75.68%。