Secondary neutral and ionized particle measurements under MeV-energy ion bombardment

We have measured both secondary neutral and ionized particles from an InSb target under 3.0 MeV Si ion bombardment. Measurements of both ions and neutrals have not been carried out so far in the MeV-energy range. The mass spectra and axial emission energy distributions of secondary particles were investigated. Secondary ions were measured with a linear- and a reflective-type time-of-flight technique, whereas secondary neutral particles were photo-ionized by a UV pulsed laser (ArF: 193 nm) and measured with a reflective-type time-of-flight technique. Different results were obtained for neutral particles in comparison with ionized particles. The mean energy of neutral Sb atoms was much lower than that of neutral In atoms, whereas the mean energies of secondary In and Sb ions were nearly equal.     

Capacitance-voltage characteristics of Semiconductor-Insulator-Semiconductor (SIS) structure

The ideal low- and high-frequency capacitance-voltage curves of a semiconductor(2)-insulator-semiconductor(1) (SIS) structure were first calculated with the insulator thickness, conductivity types and doping concentrations in semiconductor(1) and semiconductor(2) as parameters. The effects of fixed oxide charge and interface trap charge on the low and high frequency capacitance-voltage curves were also calculated. It was found that the fixed oxide sheet charge density with its centroid and the order estimation of the interface trap charge density with its effective type in addition to the insulator thickness, conductivity types and doping concentrations in semiconductor(1) and semiconductor(2) could be estimated from measured low and high frequency capacitance-voltage curves of an SIS structure.     

INTEGRATED CONTROL FOR VEHICLE YAW MOTIONUSING DOUBLECOSTFUNCTION LQR

The front steering angle control and its integration with the direct yaw moment control are suggested to enhance the handling performance for heavyduty vehicles based on a 3D vehicle modelThe doublecostf unction LQR methodology (DLQR) which extends the concept and the applicable field of LQR to express the practical requirements more plainly,is proposed to determine the control input value:compensation value of front steering angle in the optimal model A simple autotuning proportion controller is employed in direct yaw moment control to regulate the moment timely The simulation results show that front steering angle control using DLQR,has good ability to achieve the desired steering output in the different running conditionsDLQR is more powerful to balance many factors effectively based on the explicit mathematics expression of the physics of the problem than LQR does     

Processes to produce superconducting Nb3Sn powders from Nb-Sn oxide

The superconducting compound Nb₃Sn was produced by the reduction of the oxides or hydroxides of niobium and tin. The procedure consists of the following three steps; (i) preparation of the mixed oxides or hydroxides, (ii) direct alloy reduction, and (iii) homogenizing heat treatment of the reduced metal powders. For mixing the two oxides, two methods were tried: the simultaneous precipitation from the aqueous solution and the solidification of the molten oxides. These mixed oxides were reduced by ca!ciunn or magnesium vapour in the temperature range 973 to 1373 K. After calcium or magnesium oxide was removed by leaching the fine compound powder had an A-15 type crystal structure, but showed a relatively low superconducting critical temperature (T _c). The isothermal annealing improvedT _c to 18.0 K.     

Water vapor solubility of poly(lactic acid) films modified the surface by vacuum ultraviolet irradiation

Surface modification of poly(lactic acid) (PLA) film is performed via 172 nm excimer lamp irradiation. Effects on water vapor solubility and physical properties via vacuum ultraviolet (VUV) irradiation are studied systematically. After VUV irradiation, water vapor solubility increases approximately 11–43% in the low‐pressure region and approximately 20–38% in the high‐pressure region as surface hydrophilicity increased. The increase is attributed to hydrogen bonding with the carboxyl groups because of VUV radiation. The modified layer is significantly swelling after water vapor sorption. The hydrophilic layer forms a thickness of 2–3 μm from the irradiated surface via VUV radiation, but no changes are observed inside the irradiated film. Therefore, PLA film solubility after irradiation is enhanced by hydrophilicity and the swelling effect of the surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42200.     

Analysis of ultrasonic welding process of mild steel and 5052 aluminium alloy

Ultrasonic welding of mild steel sheet (SPCC) and aluminium alloy sheet (A5052) was conducted using two different weld tips of a knurled tip (K-tip) and a curved shape tip without knurled edges (C-tip). Behaviours of the weld tip and the welded materials during the weld process were analysed using a high-speed camera observation and an image correlation. The C-tip welding shows a completely different displacement behaviour from the K-tip welding; a relative motion between the tool tip and A5052 in contact with the tip predominantly occurs in the C-tip in contrast to a relative motion between A5052 and SPCC observed in the K-tip. The joint strength using the C-tip was higher than that using the K-tip under the weld conditions in this study. It is demonstrated that the relative motion behaviour in the C-tip causes a macroscopic deformation of A5052 in the vibration direction. This phenomenon promotes growth of a bonded region, resulting in the increase of joint strength. It is surmised that Fe–Al intermetallic layer forms at the weld interface, and the joint strength consequently decreases for the longer weld time condition.     

Highly unsaturated fatty acid might act as an antioxidant in emulsion system oxidized by azo compound

Now it is recognized that DHA is oxidatively stable fatty acid compared with linoleic acid (LA) in emulsified system, although DHA is oxidatively unstable in a bulk system. In fact, an emulsified mixture of DHA and LA behaves as in a bulk system, namely the oxidative stability of DHA becomes lower than that of LA. Therefore, in this study, tridocosahexaenoate (DDD) and glycerol trilinoleate (LLL) were separately emulsified using TritonX-100 as an emulsifier and DDD emulsion was mixed with the oxidizing LLL emulsion using a water-soluble radical initiator, 2,2'-azobis(2-aminopropane) dihydrochloride. As a result, DHA suppressed the oxidation of LA, while DHA was not significantly oxidized. This suppression ability was examined using glycerol trieicosapentaenoate, glycerol trilinolenate, or glycerol trioleate instead of DDD and it was found that this activity was increased with the increasing number of double bonds in the structure. Furthermore, the same type of experiment was carried out using a lipid-soluble radical initiator, 2,2'-azobisisobutyronitrile and the similar result was obtained. These results indicated that a highly polyunsaturated fatty acid might act as an antioxidant in an emulsion system oxidized by an azo compound.