Visible Light Irradiation of [60]Fullerene Causes Killing and Initiation of Transformation in Balb/3T3 Cells

Abstract

Cell transformation in vitro is a model of carcinogenesis in vivo. Two-stage transformation assay increases the sensitivity of cells to chemicals and permits detection of carcinogens acting as initiating agents. [60]Fullerene (C₆₀) was cytotoxic in BALB/3T3 cells when it was irradiated by visible light, but not without light irradiation. Under conditions when C₆₀ was cytotoxic, it acted as an initiating agent for cell transformation, but it did not act as a complete transforming agent. the initiating activity of visible-light-irradiated C₆₀ was statistically significant in a modified two-stage transformation assay including a procedure for replating cells treated by C₆₀ and light, but it was equivocal in the standard two-stage transformation assay.     

Properties of Hopfield model with the zero-order synaptic decay

In this paper, we investigate the effect of synaptogenesis on memories in the brain, using the abstract-associative memory model, Hopfield model with the zero-order synaptic decay. Using the numerical simulation, we demonstrate the possibility that synaptogenesis plays a role in maintaining recent memories embedded in the network while avoiding overloading. For the network consisting of 1000 units, it turned out that the minimum decay rate to avoid overloading is 0.02, and the optimal decay rate to maximize the storage capacity is 0.08. We also show that the average numbers of replacement synapses at each learning step corresponding to these two values are 1187 and 21024, respectively.     

Multi-scale parallel finite element analyses of LDH sheet formability tests based on crystallographic homogenization method

A multi-scale parallel finite element (FE) procedure based on the crystallographic homogenization method was applied to the LDH sheet formability test analysis. For the multi-scale structure, two scales are considered. One is a microscopic polycrystal structure and the other is a macroscopic elastic plastic continuum. The analysis code can predict the formability of sheet metal in macro-scale, simultaneously the crystal texture and hardening evolutions in the micro-scale (Nakamachi E et al. Int J Plasticity 2007;23:450-8). Since huge computation time is required for the nonlinear dynamic multi-scale FE analysis, parallel computing technique based on domain partitioning of FE model for macro-continuum is introduced into the multi-scale code using the message passing interface (MPI) library and PC cluster (Kuramae H et al. In: Proceedings of the eighth international conference on computational plasticity, Part 1, 2005. p. 622-5). The explicit time stepping solution scheme in the nonlinear multi-scale FE dynamic problem is well-suited for parallel computing on distributed memory environment such as PC cluster because solving simultaneous equation is not required. We measured crystal morphologies of four automotive sheet metals, aluminum alloy sheet metals A6022-T43 and A5182-O, an asymmetrically rolled aluminum alloy sheet metal A6022-ASR, and mild steel HC220YD, by using the scanning electron microscope (SEM) with electron back scattered diffraction (EBSD) analyses, and defined a three-dimensional representative volume element (RVE) of micro polycrystal structure, which satisfy the periodicity condition of crystal orientation distribution. We evaluate not only macroscopic formability of the automotive sheet metals by the multi-scale LDH test analysis, but also microcrystalline texture evolution during plastic deformation. Furthermore, a relationship between the macroscopic formability and the microcrystal texture evolution was discussed through looking at multi-scale FE results. It is concluded that the mild steel HC220YD was the highest formability than the aluminum alloy sheet metals because of remaining and generating the γ-fiber texture, such as {1 1 1}〈1 1 0〉-{1 1 1}〈1 1 2〉 orientations, during plastic deformation.     

Thickness estimation of interface films formed on Li1−xCoO2 electrodes by hard X-ray photoelectron spectroscopy

Solid electrolyte interface (SEI) films formed on Li_1−xCoO₂ electrodes were observed with hard X-ray photoelectron spectroscopy (HX-PES). This paper particularly focuses on film thickness estimation using HX-PES with theoretical calculation. The validity of the calculation was proven by experiments using model SEI films. The native film formed on a LiCoO₂ composite electrode was estimated to be LiF with its thickness of 5 nm. Formation of Co (II) species on top of LiCoO₂ was also indicated. Storage of the electrode at 60 °C brought about considerable film growth (30-40 nm) with carbonate compounds formation. SEI film changes during charging of the LiCoO₂ electrode were also examined. The main component in the film was deduced to be LiF or a kind of fluorite, with its thickness decreased during charging. The SEI formation mechanisms are also elucidated.     

Biosynthesis of Trehangelin in Polymorphospora rubra K07–0510: Identification of Metabolic Pathway to Angelyl‐CoA

Trehangelins are trehalose angelates discovered from endophytic actinomycete Polymorphospora rubra K07‐0510. We identified the trehangelin biosynthetic gene cluster, including genes that encode a glycoside hydrolase‐like protein (thgC), α‐amylase (thgD), 3‐ketoacyl‐ACP synthase III (thgI), 3‐ketoacyl‐ACP reductase (thgK), enoyl‐CoA hydratase (thgH) and acyl transferase (thgJ). Heterologous expression of thgH, thgI, thgJ and thgK confirmed the importance of these genes in the biosynthesis of trehangelin A. Enzymatic activity studies showed that ThgI catalyses the condensation of acetyl‐CoA and methylmalonyl‐CoA to 2‐methylacetoacetyl‐CoA (MAA‐CoA), ThgK catalyses NADPH‐dependent reduction of MAA‐CoA to 3‐hydroxy‐2‐methylbutyryl‐CoA (HMB‐CoA) and ThgH catalyses the dehydration of HMB‐CoA to angelyl‐CoA (AN‐CoA). This is the first report on the elucidation of the enzymatic formation of AN‐CoA.     

Study on prevention of angular distortion in fillet-welded T-joint by welding with a trailing reverse-side gas heating

Reduction or control of angular distortion without additional processes is demanded because it takes a lot of time and effort to correct the angular distortion of fillet-welded T-joints. In this study, the reduction or control of angular distortion of both sides of a fillet-welded T-joint by welding with trailing reverse-side gas heating was investigated through a welding experiment and its numerical simulation. First, the effect of gas heating position and intensity on the reduction in angular distortion was experimentally investigated using a gas burner. The results showed that angular distortion became smallest when reverse-side heating using the gas burner was located 50 mm backward of the welding torch. Also, the concentrated gas flame with increased propane and oxygen gas flow was effective for reducing angular distortion. It was clarified that the angular distortion could be controlled completely with an appropriate reverse-side gas heating condition. Next, the numerical simulation model of welding and gas heating was constructed based on comparison with the measured temperature histories and angular distortion. Through the numerical simulation of welding with a trailing reverse-side gas, more detailed understanding of the effect of gas heating condition on reduction in angular distortion was developed. In addition, it was confirmed that the gas heating position for the smallest angular distortion is dependent on the temperature distribution along the thickness of the flange plate.     

Gene Expression over Time during Cell Transformation Due to Non-Genotoxic Carcinogen Treatment of Bhas 42 Cells

The Bhas 42 cell transformation assay (Bhas 42 CTA) is the first Organization for Economic Cooperation and Development (OECD)-certificated method used as a specific tool for the detection of the cell-transformation potential of tumor-promoting compounds, including non-genotoxic carcinogens (NGTxCs), as separate from genotoxic carcinogens. This assay offers the great advantage of enabling the phenotypic detection of oncotransformation. A key benefit of using the Bhas 42 CTA in the study of the cell-transformation mechanisms of tumor-promoting compounds, including non-genotoxic carcinogens, is that the cell-transformation potential of the chemical can be detected directly without treatment with a tumor-initiating compound since Bhas 42 cell line was established by transfecting the v-Ha-ras gene into a mouse fibroblast cloned cell line. Here, we analyzed the gene expression over time, using DNA microarrays, in Bhas 42 cells treated with the tumor-promoting compound 12-O-tetradecanoylphorbol-13-acetate (TPA), and NGTxC, with a total of three repeat experiments. This is the first paper to report on gene expression over time during the process of cell transformation with only a tumor-promoting compound. Pathways that were activated or inactivated during the process of cell transformation in the Bhas 42 cells treated with TPA were related not only directly to RAS but also to various pathways in the hallmarks of cancer.     

Development of a transparent single-grid-type micro-strip gas chamber based on LCD technology

The liquid crystal display (LCD) technology allows several simple circuits to be built using thin film transistors, thus making fabrication of compact, integrated, large-area, and low-cost micro-pattern gaseous detectors possible. In this work, a single-grid-type micro-strip gas chamber (S-MSGC) using transparent electrodes based on the LCD technology was fabricated and successfully operated in several gas mixtures. The detector was coupled with a multi-pixel photon counter to detect an optical signal through the transparent substrate in Ar/CF₄ gas. Both electrical and optical signals were measured and the light yield of the detector was acquired. Successful operation of the S-MSGC can be considered the very important first step for development of the next target of integrated devices.     

Serum Amyloid A3 Promoter-Driven Luciferase Activity Enables Visualization of Diabetic Kidney Disease

The early detection of diabetic nephropathy (DN) in mice is necessary for the development of drugs and functional foods. The purpose of this study was to identify genes that are significantly upregulated in the early stage of DN progression and develop a novel model to non-invasively monitor disease progression within living animals using in vivo imaging technology. Streptozotocin (STZ) treatment has been widely used as a DN model; however, it also exhibits direct cytotoxicity to the kidneys. As it is important to distinguish between DN-related and STZ-induced nephropathy, in this study, we compared renal responses induced by the diabetic milieu with two types of STZ models: multiple low-dose STZ injections with a high-fat diet and two moderate-dose STZ injections to induce DN. We found 221 genes whose expression was significantly altered during DN development in both models and identified serum amyloid A3 (Saa3) as a candidate gene. Next, we applied the Saa3 promoter-driven luciferase reporter (Saa3-promoter luc mice) to these two STZ models and performed in vivo bioluminescent imaging to monitor the progression of renal pathology. In this study, to further exclude the possibility that the in vivo bioluminescence signal is related to renal cytotoxicity by STZ treatment, we injected insulin into Saa3-promoter luc mice and showed that insulin treatment could downregulate renal inflammatory responses with a decreased signal intensity of in vivo bioluminescence imaging. These results strongly suggest that Saa3 promoter activity is a potent non-invasive indicator that can be used to monitor DN progression and explore therapeutic agents and functional foods.