Mammalian Cytochrome P450-Dependent Metabolism of Polychlorinated Dibenzo-p-dioxins and Coplanar Polychlorinated Biphenyls

Polychlorinated dibenzo-p-dioxins (PCDDs) and coplanar polychlorinated biphenyls (PCBs) contribute to dioxin toxicity in humans and wildlife after bioaccumulation through the food chain from the environment. The authors examined human and rat cytochrome P450 (CYP)-dependent metabolism of PCDDs and PCBs. A number of human CYP isoforms belonging to the CYP1 and CYP2 families showed remarkable activities toward low-chlorinated PCDDs. In particular, human CYP1A1, CYP1A2, and CYP1B1 showed high activities toward monoCDDs, diCDDs, and triCDDs but no detectable activity toward 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-tetraCDD). Large amino acids located at putative substrate-recognition sites and the F-G loop in rat CYP1A1 contributed to the successful metabolism of 2,3,7,8-tetraCDD. Rat, but not human, CYP1A1 metabolized 3,3'',4,4'',5-pentachlorobiphenyl (CB126) to two hydroxylated metabolites. These metabolites are probably less toxic than is CB126, due to their higher solubility. Homology models of human and rat CYP1A1s and CB126 docking studies indicated that two amino acid differences in the CB126-binding cavity were important for CB126 metabolism. In this review, the importance of CYPs in the metabolism of dioxins and PCBs in mammals and the species-based differences between humans and rats are described. In addition, the authors reveal the molecular mechanism behind the binding modes of dioxins and PCBs in the heme pocket of CYPs.     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.     

Methanol decomposition to synthesis gas over supported Pd catalysts prepared from synthetic anionic clays

Supported Pd or Rh catalysts were prepared by the solid-phase crystallization method starting from hydrotalcite anionic clay minerals based on [Mg₆Al₂(OH)₁₆CO ₂ ²⁻ ]·4H₂O as the precursors. The precursors were prepared by a coprecipitation method from the raw materials containing Pd²⁺ and various trivalent metal ions which can replace each site of Mg²⁺ and Al³⁺ in the hydrotalcite. Rh³⁺ was also used for preparing the catalyst as comparison. The precursors were then thermally decomposed and reduced to form supported Pd or Rh catalysts and used for the methanol decomposition to synthesis gas. Among the precursors tested, use of Mg–Cr hydrotalcite containing Pd²⁺ resulted in the formation of efficient Pd supported catalysts for the production of synthesis gas by selective decomposition of methanol at low temperature. Although Pd²⁺ cannot well replace the Mg²⁺ site in the hydrotalcite, the Pd supported catalyst (Pd/Mg–Cr) prepared by the solid-phase crystallization method formed highly dispersed Pd metal particles and showed much higher activity than that prepared by the conventional impregnation method. When the precursor was prepared under mild conditions, more fine particles of Pd metal were formed over the catalyst, resulting in high activity. It is likely that the high activity may be due to the highly dispersed and stable Pd metal particles assisted by the role of Cr as the co-catalyst. This revised version was published online in November 2006 with corrections to the Cover Date.     

Effect of cilostazol, a phosphodiesterase type III inhibitor, on histamine-induced increase in [Ca2+]i and force in middle cerebral artery of the rabbit

1. The effect of cilostazol, an inhibitor of phosphodiesterase type III (PDE III), on the contraction induced by histamine was studied by making simultaneous measurements of isometric force and the intracellular concentration of Ca2+ ([Ca2+]i) in endothelium-denuded muscle strips from the peripheral part of the middle cerebral artery of the rabbit. 2. High K+ (80 mM) produced a phasic, followed by a tonic increase in both [Ca2+]i and force. Cilostazol (10 microM) did not modify the resting [Ca2+]i, but it did significantly decrease the tonic contraction induced by high K+ without a corresponding change in the [Ca2+]i response. 3. Histamine (3 microM) produced a phasic, followed by a tonic increase in both [Ca2+]i and force. Cilostazol (3 and 10 microM) significantly reduced both the phasic and tonic increases in [Ca2+]i and force induced by histamine, in a concentration-dependent manner. 4. Rp-adenosine-3':5'-cyclic monophosphorothioate (Rp-cAMPS, 0.1 mM), a PDE-resistant inhibitor of protein kinase A (and as such a cyclic AMP antagonist), did not modify the increases in [Ca2+]i and force induced by histamine alone, but it did significantly decrease the cilostazol-induced inhibition of the histamine-induced responses. 5. In Ca2+-free solution containing 2 mM EGTA, both histamine (3 microM) and caffeine (10 mM) transiently increased [Ca2+]i and force. Cilostazol (1-10 microM) (i) significantly reduced the increases in [Ca2+]i and force induced by histamine, and (ii) significantly reduced the increase in force but not the increase in [Ca2+]i induced by caffeine. 6. In ryanodine-treated strips, which had functionally lost the histamine-sensitive Ca2+ storage sites, histamine (3 microM) slowly increased [Ca2+]i and force. Cilostazol (3 and 10 microM) lowered the resting [Ca2+]i, but did not modify the histamine-induced increase in [Ca2+]i, suggesting that functional Ca2+ storage sites are required for the cilostazol-induced inhibition of histamine-induced Ca2+ mobilization. 7. The [Ca2+]i-force relationship was obtained in ryanodine-treated strips by applying ascending concentrations of Ca2+ (0.16-2.6 mM) in Ca2+-free solution containing 100 mM K+. Histamine (3 microM) shifted the [Ca2+]i-force relationship to the left and increased the maximum Ca2+-induced force. Under the same conditions, whether in the presence or absence of 3 microM histamine, cilostazol (3-10 microM) shifted the [Ca2+]i-force relationship to the right without producing a change in the maximum Ca2+-induced force. 8. It is concluded that, in smooth muscle of the peripheral part of the rabbit middle cerebral artery, cilostazol attenuates the histamine-induced contraction both by inhibiting histamine-induced Ca2+ mobilization and by reducing the myofilament Ca2+ sensitivity. It is suggested that the increase in the cellular concentration of cyclic AMP that will follow the inhibition of PDE III may play an important role in the cilostazol-induced inhibition of the histamine-contraction.     

Meter-scale large area LED-embedded light fabric for the application of fabric ceilings in rooms

We have developed a meter-scale light emitting diode (LED)-embedded light fabric and its weaving machine for application to a light device for fabric ceilings, which have recently become desired for lightweight safe ceilings in Japan and other countries with frequent earthquakes. The LED fabric structure is 1.2-m-wide woven fabric that has 5-mm-wide LED chip-mounted printed circuit board (PCB) tapes as wefts. LEDs are mounted on the tape of PCBs with a reel-to-reel chip mounting system. Then, the LED-mounted tapes are woven with a developed automatic looming machine that aligns the weft with an accuracy of 0.9 mm, which is suitable for precise arrangement of LEDs and wiring to power supply. A 1.2 × 1.2 m LED-embedded light fabric weighing 320 g/m² was woven. The luminance of the LED fabric is 353 lx at a distance of 1 m, which is the luminance of conventional office lighting. The temperature increase of LEDs without a rigid cooling aluminum plate is only 5.8 °C, and the LED fabric is flexible enough to sustain 1,000 bends down to a radius of 3 mm. This LED fabric and its weaving technology will lead to light devices that have lightweight, large area, and high flexibility for fabric ceilings, walls, and other large areas in homes and offices.     

Suitable parameters of single-mode optical fibre

A new method for determining suitable single-mode fibre parameters is examined. Suitable fibre parameters are determinable by minimising cabling- and splicing-loss increases. An eight-fibre cable was manufactured and the loss increases were measured. ? = 0.2% and V = 2.2 are the values selected using this method and for the experimental results.     

Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.     

Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode

We figure optical surfaces by plasma chemical vaporization machining (CVM) with a pipe electrode, in which an rf plasma generated at the electrode tip under approximately atmospheric pressure moves over the surfaces. We propose a shaping method in which the movement of plasma on the surfaces can be determined. Flat and aspheric surfaces are successfully figured with the desired peak-to-valley shape accuracy of 0.1 microm. The root-mean-square roughness of the resultant surfaces is at the subnanometer level. These results confirm that the plasma CVM and the shaping method have the capability to fabricate optics with high accuracy.     

High-temperature pyrolysis of ceramic fibers derived from polycarbosilane–polymethylhydrosiloxane polymer blends with porous structures

The polymer blends of PCS (polycarbosilane) and PMHS-h (polymethylohydrosiloxane with high molecular weight) were prepared by freeze-drying process of mixed benzene solution. Melt viscosity, mass loss, and gas evolution from prepared polymer blends were analyzed. A polymer blend of HSah15 (15 mass% PMHS-h to PCS) was melt-spun to fiber form, curing by thermal oxidation and pyrolyzed at various temperatures up to 1773 K. The obtained fibers were investigated by tensile tests, FE-SEM (field emission scanning electron microscope) observation, and XRD (X-ray diffraction) analysis. After pyrolysis at 1273 K, there were no pores in the cross section of the fiber derived from pure PCS; however, there were amounts of pores in the cross sections of the fiber derived from HSah15. After pyrolysis at 1773 K, the coarse β-SiC (silicon carbide) crystals were formed on the outside surface of the fiber derived from pure PCS; however, no remarkable β-SiC crystal were formed on the outside surface of the fiber derived from HSah15.     

Super‐reflective color LCD with PDLC technology

Abstract— A novel reflective color LCD without polarizers has been developed using a PDLC film and a retro‐reflector. Bright color images including moving images are achievable with ambient light. This novel LCD will enable the new application area of electronic paper.