A new recovery process of carbon dioxide from alkaline carbonate solution via electrodialysis

Bipolar membrane electrodialysis is applied to CO₂ recovery from alkaline carbonate solution. CO₂ in flue gas is captured by an alkaline hydroxide absorbing solution to form an alkaline carbonate solution. The captured CO₂ is recovered from the alkaline carbonate solution via bipolar membrane electrodialysis, and the alkaline solution is regenerated simultaneously. To reduce the power requirement for CO₂ recovery, this study considers optimal design and operation. Three membrane arrangements were compared, and the results indicate the membrane arrangement comprising a bipolar membrane and cation exchange membrane is the most energy saving. With further optimization of operation conditions, the minimum power requirement for CO₂ recovery was reduced to 2.1 MJ/kg‐CO₂ (or 2.1 GJ/t‐CO₂). © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Study on environmental effect on fatigue and creep-fatigue strength of 316FR stainless steel in sodium at elevated temperature

Low-carbon 316 stainless steel with medium-nitrogen (316FR) is considered as the principal structural material for next generation fast breeder reactor (FBR) plants in Japan. The material strength standard and the creep-fatigue life evaluation method for 316FR have been developed. However, they are based on the results of material tests in air, while actual structural material will be used mainly in liquid sodium environment in the plants. In order to clarify the environmental effect, cyclic bending tests were carried out with and without hold time in sodium. Tested materials were 316FR and conventional 304 and 316 stainless steels. Weld metal of 316FR was also tested. As a result, it was found that fatigue and creep-fatigue lives of 316FR in sodium were larger than those in air and no explicit consideration of the environmental effect is necessary in design. It was also found that the life evaluation method based on the ductility exhaustion concept is applicable to creep-fatigue life assessment in sodium.     

The pharmacokinetics of water-in-oil-in-water-type multiple emulsion of a new tacrolimus formulation

We developed a water-in-oil-in-water (W/O/W)-type multiple emulsion of a new tacrolimus formulation. A potential approach to avoid the complications of systemic immunosuppression and simultaneously enhance immunosuppressive efficacy is to deliver immunosuppressive agents locally to the site of the target organs. The W/O/W emulsion is dispersed oil drops containing smaller water droplets that allow the delivery of drugs preferentially to the reticuloendothelial system (RES). Since the liver and the spleen are primary components of the RES, and the brain and the kidney have a poor RES, we hypothesized that a W/O/W emulsion of tacrolimus would prossess the pharmacokinetic benefits of local immunosuppression. We evaluated this hypothesis in a rat model. The tacrolimus levels of whole blood, the liver, spleen, brain, and kidney in rats given intravenous emulsions of tacrolimus (W/O/W group) were compared with a group administered tacrolimus alone (T group). There were no significant differences between the pharmacokinetic parameters of W/O/W group and T group based on whole blood data. However, the W/O/W group had significantly decreased tacrolimus levels in the brain and kidney, and significantly increased levels in the liver and spleen compared with the T group. These data suggest that the W/O/W emulsion is applicable as an intravenous drug carrier for local immunosuppression.     

Surface pressure and wind load characteristics on prisms immersed in a simulated transient gust front flow field

Thunderstorm generated gust fronts are responsible for various degrees of structural damage in many areas of the world. However, the resulting impact of gust front winds is not fully understood to such a level that their flow kinematics, dynamics and impact on structures can be quantified with some certainty. Gust front winds are transient in nature and have a flow profile which differs significantly from a typical boundary layer flow field. This study focuses on investigating the effects of this flow profile and its transient nature on the aerodynamics of bluff, prismatic bodies. A gust front type flow field is generated using a multiple fan wind tunnel and the resulting surface pressures are captured on a suite of prismatic models, which vary in size in relationship to the oncoming wind profile. The temporal variations in surface pressures are analyzed using traditional time, frequency and time-frequency domain schemes. Results indicate the changing nature of the surface pressure field in time, highlighting both qualitative and quantitative differences between local and area-averaged pressures under a host of flow profiles.     

Evaluation of hexabromocyclododecane in fish and marine mammal oil supplements

We analyzed the dietary fish and marine mammal oil supplements purchased from Japanese markets for hexabromocyclododecane (HBCD); 20 brands were analyzed by liquid chromatography–tandem mass spectrometry (LC/MS/MS). HBCD was detected in 15 of 22 samples, and the concentrations of all the HBCD isomers (α, β, and γ) ranged from <0.9 to 67 ng/g lipid weight. α-HBCD was the dominant residue among the HBCD isomers. However, the composition of HBCD isomers varied according to the sample type. We found that 1 sardine oil brand and 2 shark liver oil brands extracted from fish captured in seawater around Japan contained relatively high levels of HBCD, indicating that both the surface and deep seawaters around Japan may have been contaminated with HBCD.     

Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

EVALUATION ON LIMITATION OF LINEAR ELASTIC FRACTURE MECHANICS FOR SMALL FATIGUE CRACK GROWTH

Abstract— The growth characteristics of small fatigue cracks were investigated under rotary bending in a high tensile strength steel, and the critical crack length above which linear elastic fracture mechanics (LEFM) is applicable was evaluated systematically from the results of the present study and previous studies in which two steels having different microstructures and strengths were used. It is found that the critical crack length extends over two regions each exhibiting different growth mechanisms. These regions of microstructurally small cracks and mechanically small cracks are found to be a unique function of the microstructural unit size and the yield strength of the materials, respectively. Therefore, using these relationships, it is possible to estimate the critical crack length for a given material.     

Configuration of sample points for the reduction of multicollinearity in regression models with distance variables

Regression models often suffer from multicollinearity that greatly reduces the reliability of estimated coefficients and hinders an appropriate understanding of the role of independent variables. It occurs in regional science especially when independent variables include the distances from urban facilities. This paper proposes a new method for deriving the configuration of sample points that reduces multicollinearity in regression models with distance variables. Multicollinearity is evaluated by the maximum absolute correlation coefficient between distance variables. A spatial optimization technique is utilized to calculate the optimal configuration of sample points. The method permits us not only to locate sample points appropriately but also to evaluate the location of facilities from which the distance is measured in terms of the correlation between distance variables in a systematic way. Numerical experiments and empirical applications are performed to test the validity of the method. The results support the technical soundness of the proposed method and provided some useful implications for the design of sample location.