Identification of Aloe species by random amplified polymorphic DNA (RAPD) analysis

Juice and integument of leaves of 3 Aloe species, Aloe vera, A. ferox and A. africana, are not allowed to be used as food according to the Pharmaceutical Affairs Law in Japan. On the other hand, whole leaves of A. arborescens can be used as food. The present study was designed to distinguish Aloe species by random amplified polymorphic DNA (RAPD) analysis. DNA was isolated from fresh and dried leaves of the 4 Aloe species. Five out of 32 different 10-mer primers examined were useful for analysis. By comparison of the characteristic bands of PCR products on agarose gel, it was possible to distinguish the 4 species. Thus, the botanical species of Aloe in commercial food products can be identified by RAPD analysis.     

Fermentation Process and Grain Structure of Baked Breads from Frozen Dough Using Freeze-Tolerant Yeasts

The fermentation process for frozen doughs using freeze‐sensitive (Saccharomyces cerevisiae, Kyowa for sweet bread; S. cerevisiae, FC for white bread) and freeze‐tolerant (S. cerevisiae, YF for sweet bread) yeasts was traced by magnetic resonance imaging (MRI). Grain network structures of baked breads were also visualized by MRI. Prefermentation before freezing, punching and remolding, or resheeting and molding treatments increased loaf volume by 10 to 110% for the baked breads using freeze‐tolerant yeast, while these treatments decreased loaf volume by 70% using freeze‐sensitive yeast. The first fermentation before freezing and the second fermentation with punching or resheeting after thawing are useful for obtaining good quality breads from frozen dough using freeze‐tolerant yeast.     

A new modeling approach for circuit‐field‐coupled time‐stepping electromagnetic analysis of saturated interior permanent magnet synchronous motors

This paper proposes a new modeling approach for circuit‐field‐coupled time‐stepping electromagnetic analysis of a saturated interior permanent magnet synchronous motor (IPMSM). To predict the drive performance quickly, the proposed approach consists of a dynamic simulator based on a new analytical model of the d‐ and q‐axis magnetization characteristics (λ‐i_d‐i_q‐θ). The model can take into account not only cross‐saturation but also the harmonics of the inductance distributions and EMF waveforms. The validity of the model is verified from suitable simulation results for the instantaneous current and torque waveforms of the IPMSM. The proposed analysis leads to a dramatic reduction in the computation time compared to circuit‐field‐coupled time‐stepping FEA, while maintaining analytical accuracy. The effectiveness of the proposed method is experimentally verified using a 10‐kW, 15,000‐rpm concentrated‐winding IPM motor. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(1): 49–58, 2011; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.21024     

Depth Profiling of Hydrogen and Oxygen in Ferroelectric Films Using High-Energy Ion Beam

A characterization technique for oxide ferroelectric materials using high-energy ion beam is presented. In this study, depth profiles of chemical elements are obtained for SBT films grown by MOD method and by MOCVD method respectively. Hydrogen depth profiles are taken by ERD technique with an Al absorber foil. Depth profiles of other elements are determined with RBS technique. For the MOD-grown sample, the elemental amount ratio was determined as Sr1.00Bi2.06 ± 0.03Ta2.02 ± 0.03O8.33 ± 0.17. The oxygen deficiency in the MOD-grown SBT film was uniformly observed at every depths. For the MOCVD-sample and the MOD-sample, the underlying Pt electrode layers contained 4.7 at.% and 3.8 at.% of hydrogen respectively.     

Countable limit sets of unimodal maps

We show that for any positive integer n, there exists a unimodal map whose turning point has a countable ω-limit set of depth n. We also show that the quadratic map F(x) = 1 − 2x ² admits countable ω-limit sets of depth n for all positive integer n.     

Ideal-Gas Heat Capacity for 2,3,3,3-Tetrafluoropropene (HFO-1234yf) Determined from Speed-of-Sound Measurements

The isobaric ideal-gas heat capacity for HFO-1234yf, which is expected to be one of the best alternative refrigerants for HFC-134a, was determined on the basis of speed-of-sound measurements in the gaseous phase. The speed of sound was measured by means of the acoustic resonance method using a spherical cavity. The resonance frequency in the spherical cavity containing the sample gas was measured to determine the speed of sound. After correcting for some effects such as the thermal boundary layer and deformation of the cavity on the resonance frequency, the speed of sound was obtained with a relative uncertainty of 0.01 %. Using the measured speed-of-sound data, the acoustic-virial equation was formulated and the isobaric ideal-gas heat capacity was determined with a relative uncertainty of 0.1 %. A temperature correlation function of the isobaric ideal-gas heat capacity for HFO-1234yf was also developed.     

Hydrogenation properties and crystal structures of Ti−Mn-V BCC solid solution alloys

We have proposed new hydrogen absorbing alloys of the ‘Laves phase related BCC solid solution alloy’, the hydrogen capacity of which reaches almost double that of conventional rare-earth based AB₅ alloys. We have reported the hydrogen absorbing properties of Ti−V−Mn, Ti−V−Cr and T−V−Mn−Cr alloys. It has been accepted that the crystal structural change of BCC hydrogen absorbing alloys is the same as that of V metal. The mono-hydride (H/M=1) of V metal has a BCT structure and the di-hydride (H/M=2) has an FCC structure. However, we recently found that the Ti−V−Mn alloy shows different behaviors in phase transformation with hydrogenation to V metal. We found three hydride phases with a BCC, a deformed FCC and an FCC structure in the Ti−V−Mn solid solution alloy-H₂ system. The deformed FCC hydride phase has not yet to our knowledge been reported. The lattice constant of the deformed FCC was 0.407 nm, one axis of which is reduced by about 4%. Its single-phase region appeared at a hydrogen content between 0.8 H/M and 1.0 H/M in absorption at 298 K. The lower plateau observed due to formation of the deformed FCC hydride phase gives an increase of effective hydrogen capacity by decreasing hydrogen remaining in the alloy in the desorption process. This article based on a presentation made in the symposium “The 2nd KIM-JIM Joint Symposium: Hydrogen Absorbing Materials”, held at Hanyang University, Seoul, Korea, October 27–28, 2000 under the auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

Effect of surface roughness on elastohydrodynamic traction: Part 1

The effect of surface roughness on traction performance was experimentally studied using a two‐roller tester. The nature of the contact was investigated using electrical resistance and electrical capacitance methods. Increased shear stress was observed in the viscous region, which could be attributed to a higher average shear rate and to greater viscosity under EHD contact conditions due to pressure fluctuations caused by the surface texture.     

Cancer chemopreventive ability of conjugated linolenic acids

Conjugated fatty acids (CFA) have received increased interest because of their beneficial effects on human health, including preventing cancer development. Conjugated linoleic acids (CLA) are such CFA, and have been reviewed extensively for their multiple biological activities. In contrast to other types of CFAs including CLA that are found at low concentrations (less than 1%) in natural products, conjugated linolenic acids (CLN) are the only CFAs that occur in higher quantities in natural products. Some plant seeds contain a considerably high concentration of CLN (30 to 70 wt% lipid). Our research group has screened CLN from different plant seed oils to determine their cancer chemopreventive ability. This review describes the physiological functions of CLN isomers that occur in certain plant seeds. CLN are able to induce apoptosis through decrease of Bcl-2 protein in certain human cancer cell lines, increase expression of peroxisome proliferator-activated receptor (PPAR)-γ, and up-regulate gene expression of p53. Findings in our preclinical animal studies have indicated that feeding with CLN resulted in inhibition of colorectal tumorigenesis through modulation of apoptosis and expression of PPARγ and p53. In this review, we summarize chemopreventive efficacy of CLN against cancer development, especially colorectal cancer.