CO毒化AB5型合金分形特征研究

研究了三种贮氢合金 L a Ni5、L a Ni4 .7Al0 .3、Ml Ni4 .5Al0 .5被 10 0× 10 - 6 CO毒化后的分形特征 ,求出这三种合金在含 10 0× 10 - 6 CO的氢中循环 ,分维分别为 0 .2 5 4 7、0 .170 9、0 .0 72 5。可以较好的解释合金被毒化的宏观现象。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

反应温度对聚苯胺薄膜生长的影响

在不同反应温度条件下采用原位聚合法在石英基片上制备了聚苯胺薄膜．对薄膜样品进行了紫外光谱、SEM、电性能表征。实验结果表明，过高的合成温度会加速聚合反应过程，抑制膜厚的增长，引起薄膜的热降解，进而对样品的导电性产生不良影响。根据生长速率与合成温度的依赖关系，估算了聚合反应的活化能Ea=34.4kJ/mol。     

有限元仿真分析中的结构周期差异探讨

针对有限元仿真分析中结构自振周期减小的问题，讨论了几种主要的影响因素，并借用商品化设计软件TBSA，ETABS 和有限元分析软件ANSYS，通过对一个简单结构的多次计算，比较了这些因素的影响大小。     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

Interactions between normal and tumoral tissues at the boundary of human anterior pituitary adenomas. An immunohistochemical study

Previously, the species complex Oncomelania hupensis, individuals of which act as intermediate hosts for the human bloodfluke Schistosoma japonicum, has been characterised by morphological and isoenzyme criteria. We have examined genetic variation between and within three subspecies of Oncomelania hupensis, i.e. O. h. hupensis (China), O. h. quadrasi (Philippines) and O. h. nosophora (Japan), by direct means using a PCR-based RFLP method. The subspecies of O. hupensis were readily distinguished by their characteristic restriction patterns, supporting isoenzyme data which suggests these may warrant species-specific status. No genetic variation was observed between O. h. quadrasi from different islands within the Philippines. In contrast, geographical isolates of O. h. hupensis differed markedly by this method indicating several genetically distinct populations of O. h. hupensis occur in China.     

Optical sequence generation based on collision avoidance usingchaotic mode transitions

An adaptive optical sequence generation scheme has been described in a nonlinear optical ring which exhibits chaotic dynamics. The adaptation is based on avoidance of collisions between the ring output and signals from another source. It is shown that collision-avoiding sequences can be autonomously selected via chaotic mode transitions induced by the feedback of collision signals. Experimental results demonstrate that the method can be successful for various collision signal patterns with different periods and pulsewidths. The mechanism of inducing chaos with collision signals is examined both experimentally and with numerical simulations and the results verify the effectiveness of the proposed adaptation method. A possible application of the proposed signal generation scheme in intelligent optical communication networks is mentioned     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

Phase transformation of calcia-alumina-magnesia fibres produced by inviscid melt spinning

CaO-Al₂O₃-MgO (CAM) ceramic fibre produced via inviscid melt spinning (IMS) was investigated for phase transformation. Differential thermal analysis (DTA) on the as-spun CAM fibre gave two transformation peaks, one for exothermic peak at around 927°C and the other for endothermic one at around 1100°C. In order to identify each phase transformation x-ray diffraction (XRD) analysis was performed on the CAM fibres heat-treated to each phase transformation completion temperature. The exothermic peak was determined to represent crystallization of remaining amorphous phase in the as-spun CAM fibre. The endothermic peak was determined to correspond to transformation of non-equilibrium CaO · Al₂O₃ phase to equilibrium 3CaO· 5Al₂O₃ phase.