一种气象卫星数据脉冲噪声滤除方法

气象卫星数据在采集或者传输的过程中,往往会引入不同程度的脉冲噪声。为提高图像质量,滤除噪音,进行可信度分析,提出了一种三阶段气象卫星数据脉冲噪声检测和滤除方法。在算法第一阶段,利用均值与均方差比值差值序列建立排序检测器(ROD),检测出图像中所有可能的脉冲噪声点;第二阶段,采用逐点滑动N×N窗口,按照每个可能的脉冲噪声点在不同的滑动窗口被重复检测到的次数,建立噪声可信度。第三阶段,对高噪声点进行滤波;对低噪声点迭代排序检测,如果可识别有噪声点,再进行滤波。结果表明,算法可以准确检测和滤除脉冲噪声,并保持数据中非噪声点信息。     

Critical Review of Fluorinated Electrolytes for High-Performance Lithium Metal Batteries

Lithium metal batteries (LMBs), due to their ultra-high energy density, are attracting tremendous attentions. However, their commercial application is severely impeded by poor safety and unsatisfactory cycling stability, which are induced by lithium dendrites, side reactions, and inferior anodic stability. Electrolytes, as the indispensable and necessary components in lithium metal batteries, play a crucial role in regulating the electrochemical performance of LMBs. Recently, the fluorinated electrolytes are widely investigated in high-performance LMBs. Thus, the design strategies of fluorinated electrolytes are thoroughly summarized, including fluorinated salts, fluorinated solvents, and fluorinated additives in LMBs, and insights of the fluorinated components in suppressing lithium dendrites, improving anodic stability and cycling stability. Finally, an outlook with several design strategies and challenges will be proposed for novel fluorinated electrolytes.     

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.     

数控机床操控器人机界面优化设计研究

目的控制器和显示器共同组成数控机床控制面板的整体界面,是机床接受与执行命令的交互平台。从人机交互角度,聚焦于控制器的界面布局进行优化设计。方法基于人机工程学理论的优化流程,采用现场访谈、现场观察等方法,将人机工程学的理论转化为具体考核指标。结论从人机工程学的研究角度出发,结合工业设计、用户体验设计学等内容,从功能区域分区、操纵器色彩设计等方面优化数控机床控制器的界面,提高系统整体效能及使用者满意度,为数控机床系统开发设计提供参考。     

Preparation of nanometre size oxide particles using filter expansion aerosol generator

Crystalline zinc oxide particles of nanometre size (< 20 nm) particles were produced from a zinc acetate solution by using a filter expansion aerosol generator (FEAG). The FEAG is an aerosol generator that is operated at 60 torr reactor pressure and produces droplets of around 2 m. The shape of the particles produced by the FEAG were distinctively different from those produced by the ultrasonic spray source (USS). Results from scanning electron microscopy (SEM) and X-ray diffractometry (XRD) indicated that crystalline zinc oxide particles of nanometre size were produced at 600 °C in 0.02 s residence time. Weight loss of these particles, determined by thermogravimetric analysis (TGA), was 3 wt%. Based on the morphology change as a function of the reactor temperature and solute concentration, we proposed that the nanometre particles were formed by uniform precipitation at the drying stage and decomposition followed by disintegration into nanometre particles. It was also shown that exothermic decomposition of the solute was not required for the disintegration of the primary particles in the FEAG process. This result opened up an opportunity for producing carbon-free nanometre particles from nitrate salts by using the FEAG.     

基于SIMD结构的多标准LDPC译码器的VLSI实现

近年来,支持多标准的LDPC译码器已逐渐成为研究的热点.与传统译码器相比,所设计的LDPC译码器具有以下优点:1.实现了一个码率、码长可配置结构,进而可以支持多种标准;2.采用了一种改进型TPMP算法,使译码器的存储器容量大大减少,避免了因分块LDPC码的非规则性所造成的数据冲突问题;3.采用基于SIMD处理器的硬件结构,实现了硬件的高度规整性,易于芯片布局布线;4.设计了一个6级可配置流水线,可分时构造校验节点处理单元和变量节点处理单元,提高了硬件利用率和系统数据吞吐率.用这种架构实现了一个同时支持CMMB和DTMB两个标准的多标准LDPC译码器;芯片规模为75万门,时钟频率为220MHz,数据吞吐率为300Mbps.     

Synthesis and characterization of novel blue azo‐dye derivatives containing acrylate group for dye‐based color filters

Abstract— Even though dyes have a fine resolution and good chromaticities, they are not widely used as coloring materials for color filters (CFs) due to their low thermal stability and chemical resistance. A series of azo‐dye derivatives, which consist of two cross‐linkable acrylate or methacrylate groups to improve thermal and chemical properties, have been synthesized and used to fabricate color filters. The spectral properties and chemical/thermal stabilities of the fabricated CFs were investigated by comparing dye‐based CFs, without a complicated dispersion process, but with pigment‐based CFs using dispersed pigment. Also, more properties including the development test and surface morphologies lithographic properties were studied. The synthesized azo dyes were characterized by elemental analysis, UV‐visible spectra, IR, mass, and ¹H‐NMR spectra.     

单磁悬浮系统的纵向解耦控制研究

磁悬浮系统是复杂的强耦合系统,研究中未充分考虑轨道的弹性形变,会造成磁浮列车和轨道之间产生耦合振动的现象,而考虑这一因素对系统的影响无疑增加了研究的难度;为了便于问题的求解,采用非线性系统理论解耦的方法,对单电磁铁悬浮系统进行纵向解耦控制,并对解耦后的子系统进行极点配置使其满足要求的性能指标;仿真结果表明该方法有效地使复杂问题简单化,并且能够实现系统的全局稳定和良好的动态性能.     

基于PolyTrans的IGES文件简化

CAD软件与基于多边形的3D软件之间数据转换需求不断增加,但是CAD模型复杂度和精细度却越来越高,数据转换的难度变大.为了解决这一难题,结合PolyTrans,分析如何解决一般3D软件难以导入大型的IGES(Initial Graphics Exchange Specifi-cation)文件的问题.从PolyTrans模型简化模块的理论依据着手,研究如何控制多边形的数量、降低文件的复杂性和减少文件的数量,使大型CAD装配模型能顺利地以单个实体形式导入Lightwave、3DS MAX以及Maya类的3D软件.并结合具体科研项目,给出了模型优化前后各指标参数对比情况.     

Stability and synchronization for Markovian jump neural networks with partly unknown transition probabilities

This paper addresses the problems of stability and synchronization for a class of Markovian jump neural networks with partly unknown transition probabilities. We first study the stability analysis problem for a single neural network and present a sufficient condition guaranteeing the mean square asymptotic stability. Then based on the Lyapunov functional method and the Kronecker product technique, the chaos synchronization problem of an array of coupled networks is considered. Both the stability and the synchronization conditions are delay-dependent, which are expressed in terms of linear matrix inequalities. The effectiveness of the developed methods is shown by simulation examples.