金属－橡胶硫化粘接过程中分子取向行为的间接证据

对金属－橡胶热硫化粘接复合体的剥离行为进行了研究，同一粘接试样的双向１８０°剥离试验显示出了巨大的差异。本文分析了弹性材料在硫化过程中的分子行为，并提出了相应的新假设，认为这是由于金属－橡胶在硫化粘接过程中分子取向交联行为所致。这种双向１８０°剥离破坏现象可被看作是金属－橡胶硫化粘接过程中分子取向行为的间接证据。     

VAX机分布式电网调度自动化系统的实现

本文介绍作者开发的一个电网调度自动化系统ＥＰＧＣ。首先介绍ＥＰＧＣ的系统结构，然后介绍系统的软件结构，并着重介绍主机软件数据库，以机监视与切换，网络通信子系统的实现方法。最后对系统的安全可靠性进行简要分析。     

多传感器检测中的数据溶合技术

多传感器检测是使用多种(或多个)传感器对同一被测对象进行广泛的测量。应用多传感器检测技术和多传感器数据溶合技术对车削加工中的零件外圆尺寸检测进行了实验研究,结果表明,多传感器检测技术能够满足现代检测技术对信息的精确要求,使得检测监控系统更加准确、可靠。     

连续输出20WAlGaAs／GaAs量子阱激光二极管线列阵

采用ＭＯＣＶＤ实现了ＡｌＧａＡｓ／ＧａＡｓ量子阱结构，获得了连续输出２０Ｗ激光二极管线列阵，线列阵长度１．０ｃｍ，激射波长８０８±４ｎｍ。     

颗粒类型对颗粒增强铝基复合材料性能的影响

本文对粉末冶金法制备的ＳｉＣ和ＴｉＣ颗粒增强铝基复合材料进行了研究。试验表明，在颗粒含量相同、尺寸相当的条件下，ＴｉＣ增强Ａｌ基复合材料的强度和模量均低于ＳｉＣ增强Ａｌ基复合材料，但其屈强比却明显高于ＳｉＣ增强Ａｌ基复合材料。高温长时间等温处理对ＴｉＣ颗粒增强纯Ａｌ复合材料的强度没有明显的影响。     

Long fiber reinforced polyamide and polycarbonate composites. II: Fatigue behavior and morphological property

Fatigue behavior and morphology of long glass fiber reinforced semicrystalline polyamide (nylon 6,6) and amorphous polycarbonate (PC) composites were investigated. The fiber length distribution in the molded samples was calculated by image analyzer. The tension-tension fatigue loading tests at various levels of stress amplitudes were studied. The two-parameter Weibull distribution function were applied to obtain the statistical probability distribution of experimental data. A good correlation existed between the experimental data and the Weibull distribution curves. Straight line S? N curves of long glass fiber reinforced semicrystalline polyamide and amorphous polycarbonate composites at various probabilities were established. The stiffness of the composite under tension-tension fatigue loading was measured. The thermal stress history was also investigated by thermo-imaging techniques during fatigue life testing. Further, failure morphology was examined by scanning electron microscopy (SEM). The results showed that the fracture behavior of the ductile damage in polyamide is different from the brittle damage in polycarbonate.     

非协调h－p型有限元补偿法

详细讨论了非协调ｈ－ｐ型有限元的补偿法，给出了令人满意的收敛阶．     

Nedocromil sodium in treatment of bronchial asthma

Clinical study on efficiency of the nedocromil sodium (Tilade, Fisons) was performed in 20 patients with atopic and nonatopic bronchial asthma. The drug was administrated in dose of 8 mg per day for 2 months which allowed to renounce regular using of Beclocort forte after 7 days of the treatment. In both types of bronchial asthma the positive effect of nedocromil sodium was confirmed, causing increase of pulmonary ventilation and decrease of bronchial hyperactivity. Especially profitably effect was noticed in atopic bronchial asthma in which statistically important increase of peak expiratory flow (PEF) was obtained and decrease of bronchial hyperreactivity by PC20 for histamine was observed (p < 0.05). Mentioned above spirometric parameters did not differ in statistically important pattern in patients with nonatopic bronchial asthma, when Beclocort forte group with Tilade group compared. Neither important differences in general number of cells nor percentage composition of cell smears were observed in bronchoalveolar lavage fluid.     

超细铁粉和氧化铁颗粒的研究

用透射电镜和图像分析仪等研究了超细铁粉和γ-Fe_2O_3粉末的结构、形貌、粒子的平均尺寸以及粒度分布。研究结果表明,多数超细铁粉粒子近似呈球形,并且,铁粉粒子由两相组成,粒子的核心部分是金屑a-Fe,表面的包裹层为氧化物层,它由Fe_3O_4和7-Fe_O_3的混合物组成。氧化层的平均厚度大约占整个粒子直径的20％左右。羰基铁粉粒子(含氧化层)的平均直径为16nm。直径在4～24nm范围的粒子数占总粒子数的91％,而7-Fe_2O_3粉末既有雪茄状粒子,也有小球状粒子。分析表明,球状粒子的平均直径为113nm,雪茄状粒子的平均直径(按<长 宽>/2计算)为148nm。由于超细铁粉粒子很细,且有磁性,制备电镜试样时分散比较困难。本文比较了几种分散方法后,使用了一种较好的分散方法——超声喷管分散法。     

双臂协调约束系统动力学问题探讨

本文讨论了双臂协调约束系统的动力学问题．文中系统地描述了该系统的适应于计算机程序化的建模方法；推导了系统的动力学方程，并给出了用约束矩阵的正交补矩阵处理系统所受协调约束的方法；编制了相应的计算机辅助分析程序ＤＲＣＲＣＳ，并用该程序对算例进行了动力学的数值分析。