单壁碳纳米管的制备及生长特性研究

采用Fe/MgO作为催化剂 ,催化裂解CH4制备了较纯的单壁碳纳米管 ,用TEM和Raman对碳纳米管进行了表征 ,对不同生长温度下制备的碳纳米管Raman径向呼吸振动峰 (RBM)进行了分析 ,研究了生长温度对单壁碳纳米管生长特性和结构特性的影响     

普通碳素钢在CSP连轧过程中的组织演变

在CSP机组上，通过普通碳素钢(Q235)的轧卡试验研究了该钢在连轧过程中的组织演变过程。结果表明：高温区的两道次大变形使原始铸造树枝晶通过再结晶基本实现了奥氏体的等轴化和组织的均匀化；进一步变形可继续细化原始奥氏体并最终获得晶粒尺寸约为30μm的、均匀的等轴晶组织。在CSP工艺中，原始奥氏体组织细化可能与精轧总压下量高、单道次变形量大、应变速率高及钢中出现异常析出物等因素有关。     

动力配煤高温复合固硫剂研究

分析了高温复合固硫剂各成分的作用，实验研究了在不同配比的燃烧试验下，各成分对燃煤着火和燃烧以及对炉渣固硫的影响，得出了该煤种高温复合固硫剂的最佳配方。     

数字多媒体广播技术现状及前景

数字多媒体广播（DMB）是从数字音频广播（DAB）基础上发展起来的一种新型广播技术。数字音频广播是在调幅AM和调频FM之后的第三代广播技术。通过对数字多媒体技术的介绍较全面地阐述了其技术系统、功能、现状及发展前景。     

一种应用于二次布局的有效划分方法

提出了一种基于二次布局的结合MFFC结群和hMETIS划分的算法.实验表明:这种方法能得到很好的布局结果,但是运行消耗的时间比较长.为了缩短划分在二次布局中运行的时间,提出了一种改进的结群算法IMFFC,用它在二次布局中做划分.与前者相比较,这种方法虽然布局质量稍差,但速度更快.     

Origin of the threshold voltage instability in SiO/sub 2//HfO/sub 2/ dual layer gate dielectrics

The magnitude of the V/sub T/ instability in conventional MOSFETs and MOS capacitors with SiO/sub 2//HfO/sub 2/ dual-layer gate dielectrics is shown to depend strongly on the details of the measurement sequence used. By applying time-resolved measurements (capacitance-time traces and charge-pumping measurements), it is demonstrated that this behavior is caused by the fast charging and discharging of preexisting defects near the SiO/sub 2//HfO/sub 2/ interface and in the bulk of the HfO/sub 2/ layer. Based on these results, a simple defect model is proposed that can explain the complex behavior of the V/sub T/ instability in terms of structural defects as follows. 1) A defect band in the HfO/sub 2/ layer is located in energy above the Si conduction band edge. 2) The defect band shifts rapidly in energy with respect to the Fermi level in the Si substrate as the gate bias is varied. 3) The rapid energy shifts allows for efficient charging and discharging of the defects near the SiO/sub 2//HfO/sub 2/ interface by tunneling.     

五氧化二钽薄膜的制备及其I-U特性

本文利用脉冲直流反应磁控溅射的方法制备了五氧化二钽 (Ta2 O5)薄膜 ,俄歇电子能谱仪测试了薄膜的成分含量 ,椭偏仪测试了Ta2 O5薄膜的厚度和折射率 ,XRD分析了薄膜的晶体结构 ,并且分别研究了氧气含量、基底温度等成膜工艺对薄膜的影响。研究结果表明薄膜的成分主要是由氧气含量决定的。利用金属 绝缘体 (介质膜 ) 金属 (MIM)结构初步对Ta2 O5薄膜进行了电学性能的测试 :皮安电流电压源测试了薄膜的I U特性 ,制备出的薄膜折射率在 2 1～ 2 2 ,MIM的I U特性曲线显示了较好的对称性和低的漏电流密度     

A clinical study in the treatment of acute bacterial infections with fleroxacin

The purpose of this clinical trial is to evaluate the efficacy and safety of fleroxacin and to compare with those of lomefloxacin. A randomized controlled study was carried out to treat sixty patients with urinary tract and respiratory tract bacterial infections, thirty in each group with one of the two drugs, and fifty cases were treated with fleroxacin in an open trial. Altogether there were one hundred and ten cases. Both fleroxacin and lomefloxacin were given orally, the dosage was 200 mg every 12 hours or 400 mg every 24 hours for 7-14 days. The clinical efficacy rate was 93.3%; the culturing rate in the fleroxacin group was 83.3%; the bacterial clearance rate was 92.3%, the incidence of adverse reactions was 9.4%, while in the lomefloxacin group they were 90.0%, 80.0%, 87.5% and 6.7% respectively, with no statistically significant difference between the two groups (P > 0.05). In the open and randomized trials, fleroxacin cured eighty cases of bacterial infections, the overall clinical efficacy rate was 90.0%, the culturing rate in the flero-xacin group was 83.8%, the bacterial clearance rate was 88.2% and the incidence of adverse reactions was 9.6%. It is shown that fleroxacin is an antibiotic of broad-spectrum, high efficacy and safety.     

不含4圈的最大简单图边数的下界

证明了具有不小于6个顶点的不包含4圈的简单图的最大可能边数的下界是2n-5。     

Heading towards an advanced signalling system for multimedia,multiparty services in broadband ISDN

Introduction of the broadband integrated services digital network (B-ISDN) will enable network users to make use of advanced multimedia, multiparty services. With this aim in view, RACE II project R2044, MAGIC, is investigating long-term signalling requirements, architecture and protocols for B-ISDN. New service concepts are being developed in MAGIC which will provide more flexibility when compared to narrowband ISDN (N-ISDN). The service requirements and other signalling requirements, such as the separation between call and associated connections at the network-node interface, are used to determine the distribution of functions over the network. The signalling protocols which are used to exchange the signalling information are subsequently developed. These signalling protocols are simulated to prove the performance and the feasibility of call handling concepts