Fabrication of TiO2-Organic Hybrid Dot Arrays Using Nanosecond Laser Interference Lithography

Laser interference lithography is an established fabrication technique for periodic arrays such as photonic crystals (PCs). In this paper, we report the fabrication of a TiO₂-organic hybrid periodic array by nanosecond laser interference lithography. TiO₂-organic hybrid films were prepared from titanium tetra- n -butoxide and 2-(methacryloyloxy) ethyl acetoacetate (MEAcAc) by the sol–gel method. The films were irradiated by using 10 ns pulses of 355 nm diffracted light from a Nd:yttrium–aluminum–garnet laser. The complexes formed by the Ti alkoxide and the MEAcAc were decomposed by laser irradiation, and the irradiated parts remained as periodic dot arrays on the substrate after the development. The two-dimensional array of this TiO₂-organic hybrid material was calcined at 450°C and formed an anatase TiO₂ dot array. The refractive index measured was 2.00. These dots were crack free and adherent to the substrate.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Fabrication of alumina films with laminated structures by ac anodization

Anodization techniques by alternating current (ac) are introduced in this review. By using ac anodization, laminated alumina films are fabricated. Different types of alumina films consisting of 50–200 nm layers were obtained by varying both the ac power supply and the electrolyte. The total film thickness increased with an increase in the total charge transferred. The thickness of the individual layers increased with the ac voltage; however, the anodization time had little effect on the film thickness. The laminated alumina films resembled the nacre structure of shells, and the different morphologies exhibited by bivalves and spiral shells could be replicated by controlling the rate of increase of the applied potentials.     

Repeated temperature modulation epitaxy for p-type doping and light-emitting diode based on ZnO.

Since the successful demonstration of a blue light-emitting diode (LED), potential materials for making short-wavelength LEDs and diode lasers have been attracting increasing interest as the demands for display, illumination and information storage grow. Zinc oxide has substantial advantages including large exciton binding energy, as demonstrated by efficient excitonic lasing on optical excitation. Several groups have postulated the use of p-type ZnO doped with nitrogen, arsenic or phosphorus, and even p-n junctions. However, the choice of dopant and growth technique remains controversial and the reliability of p-type ZnO is still under debate. If ZnO is ever to produce long-lasting and robust devices, the quality of epitaxial layers has to be improved as has been the protocol in other compound semiconductors. Here we report high-quality undoped films with electron mobility exceeding that in the bulk. We have used a new technique to fabricate p-type ZnO reproducibly. Violet electroluminescence from homostructural p-i-n junctions is demonstrated at room-temperature.     

Intravesical BCG therapy for superficial bladder cancer

Intravesical instillation of Tokyo 172 strain bacillus Calmette-Guerin (BCG) after transurethral resection of bladder tumor (TUR-Bt) was applied to 35 patients with superficial bladder cancer. The patients received 80 mg of BCG in 40 ml saline infused into the bladder once a week for 6 weeks. Actuarial non-recurrence rates for all 35 patients were 81.7% and 58.4% at one and two years after the BCG therapy, respectively. The recurrence of the bladder cancer after the BCG therapy was observed in 12 patients 3-27 months later. Seven patients received an additional course of BCG instillation, and 6 (86%) showed no further recurrence. Thus, the overall success rate of 2 cycles of BCG instillation was 83% (29 of 35 patients). Moreover, in some cases intravesical BCG instillation was effective for recurrent superficial bladder cancer after intravesical instillation of anti-cancer agents and prolonged the period until recurrence. The progression rate was only 5% (2 of 35 patients). These results suggest that intravesical BCG therapy for superficial bladder cancer helps prevent disease progression.     

Measurement of serum p53 protein in patients with small cell lung cancer and results of its clinicopathological evaluation

Serum p53 protein levels were measured in 36 patients with small cell lung cancer (SCLC) and 35 patients with benign lung diseases in order to evaluate the relationship of these levels to clinicopathological features of SCLC. Serum levels of p53 protein were measured by an enzyme-linked immunosorbent assay, p53 protein level was 23.92 +/- 6.78 pg/ml in patients with SCLC, and similar to that (17.47 +/- 2.86 pg/ml) in patients with benign lung diseases. By the clinical stage of SCLC, the mean level of p53 protein was 16.68 +/- 4.62 pg/ml in 21 patients with limited disease, and lower than that in 15 patients with extensive disease (34.05 +/- 14.84 pg/ml) (P = 0.23). The levels of p53 protein were not correlated with age, smoking index, or presence of cancer history for patients with SCLC. However, immunohistochemical examination disclosed a mild correlation between the expression of p53 protein by SCLC tumor and p53 protein serum level (r = 0.45, P = 0.02). Two patients with SCLC had an elevated serum level of p53 protein (> 2 S.D. above the mean for benign lung diseases). However, measurement of p53 protein serum level was not found to be clinically useful for detection of SCLC.     

Surgical treatment for primary cardiac malignant lymphoma

A 60-year-old woman who complained of palpitation was diagnosed as ventricular tachycardia on electrocardiography and admitted to our hospital. The ultrasonic cardiography showed cardiac tumor in right ventricle and right atrium. Due to the obstruction of the right ventricle inflow by the tumor, we immediately performed resection of cardiac tumor and repair of right ventricle wall under cardiopulmonary bypass. The tumor was diagnosed as malignant lymphoma by pathological examination for surgical specimen of tumor. After operation her general condition was good, but residual cardiac lymphoma developed large size. We performed radiation therapy for cardiac lymphoma. Therefore the lymphoma was reduced to minimum size. Six months after operation metastatic malignant lymphoma appeared at whole body. So we performed chemotherapy for reduction of systemic malignant lymphoma. At first the chemotherapy was very effective. But metastasis spread rapidly and effectiveness of chemotherapy reduced. Thirteen months after operation she died for respiratory distress, probably due to metastatic brain tumor.     

Apical vesicles bearing inositol 1,4,5-trisphosphate receptors in the Ca2+ initiation site of ductal epithelium of submandibular gland

Previous studies have demonstrated that classical inbred strains of laboratory mice do not exhibit large genetic distances when simple sequence repeats (SSRs) are used to test for their polymorphisms whereas mice from wild origin exhibit high polymorphisms (more than 90%) for these sequence when compared with classical inbred strains of laboratory mice. The difference between Mus musculus castaneus and C57BL/6J reaches 98% and F1s male and female are fertile. These two properties pave the way for gene mapping derivating segregating generations between these strains. The phenotypical characteristics of Mus musculus castaneus have not been investigated, unfortunately. The first screening of Mus musculus castaneus and C57BL/6By was carried out for sensorial and motor development, spontaneous behavior in new environment, paw preference, maternal behavior, aggression in two different situations and time to learn escape in a water maze. Morphometry of hippocampus and weight of the male reproductive organs for measures that have been reported to be correlated with several of the examined behavior are also reported. The authors tested also reactivity to one drug (beta-CCM) revealing seizure proneness. The two strains differ for 69% of the reported measures. Comparison to other strains for the same measures obtained in the laboratory for identical tests with mice reared in identical situations provided the mean to compare Mus musculus castaneus with a large set of more or less traditional mice. This strain has the most extreme position for 80% of the comparisons.