Feasibility of palm‐biodiesel fuel for a direct internal reforming solid oxide fuel cell

The feasibility of a direct internal reforming (DIR) solid oxide fuel cell (SOFC) running on wet palm‐biodiesel fuel (BDF) was demonstrated. Simultaneous production of H₂‐rich syngas and electricity from BDF could be achieved. A power density of 0.32 W cm^?2 was obtained at 0.4 A cm^?2 and 800 °C under steam to carbon ratio of 3.5. Subsequent durability testing revealed that a DIR‐SOFC running on wet palm‐BDF exhibited a stable voltage of around 0.8 V at 0.2 A cm^?2 for more than 1 month with a degradation rate of approximately 15 % / 1000 h. The main cause of the degradation was an increase in the ohmic resistance. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of duct geometry on shock wave discharge

This paper describes computational work to understand the unsteady flow-field of a shock wave discharging froman exit of a duct and impinging upon a flat plate.A flat plate is located downstream, and normal to the axis of theduct.The distance between the exit of the duct and fiat plate is changed.In the present study,two different ductgeometries(i.e.,square and cross section)are simulated to investigate the effect of duct geometry on theun-steady flows of a shock wave.In computation,the total variation diminishing(TVD)scheme is employed tosolve three-dimensional,unsteady,compressible,Euler equations.Computations are performed over the range ofshock Mach number from 1.05 to 1.75.Computational results can predict the three-dimensional dynamic behav-iour of the shock wave impinging upon the flat plate.The results obtained show that the pressure increase gener-ated on the plate by the shock impingement depends on the duct geometry and the distance between the duct exitand plate,as well as the shock Mach number.It is also found that for the duct with cross-section,the unsteadyloads acting on the flat plate are less,compared with the square duct.     

Optical properties of C60/a-C superlattice structures for solar cell applications

C₆₀/amorphous carbon superlattice structures were fabricated by shutter-controlled molecular beam deposition. The periodic structure of resulted films was confirmed by X-ray diffraction measurements. From the UV–vis reflectance/transmittance measurements, the energy shift of absorption edge was observed in the superlattice structures as a function of their well width. The carbon-based superlattice structure is the useful technique to control the band gap energy of carbon materials.     

Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

High-throughput immunophenotyping by surface plasmon resonance imaging

Cell binding assays on antibody arrays permit the rapid immunophenotyping of living cells. The throughput of the analysis, however, is still limited due to our inability to perform parallel and quantitative detection of cells captured on the array. To address this limitation, we employed here an imaging technique based on surface plasmon resonance (SPR). SPR has been frequently used to monitor capture of proteins on antibody microarrays, while few cases were reported for capture of cells. Antibody arrays were prepared through the photopatterning of an alkanethiol monolayer on a gold-evaporated glass plate and the subsequent immobilization of various antibodies onto 4-9 separate spots created by photopatterning. A glass slip was mounted onto the array with a thin spacer to construct a parallel-plate chamber. Leukemia cells were injected into the chamber to conduct a binding assay, while refractive index changes at the vicinity of the array surface were monitored by SPR imaging. We observed that SPR signals were intensified on specific antibody spots but not on nonspecific spots. Confocal laser scanning microscopy revealed that the observed SPR signals were attributed to cell deformations caused by multivalent interactions with immobilized antibody, which effectively elevated the refractive index of a medium phase within an evanescent field. This effect could be suitably utilized to monitor quantitatively cell binding to multiple spots from a heterogeneous cell population.     

Investigation into the therapeutic efficacy of continuous isoproterenol inhalation in relation to respiratory infections in asthmatic children

In our Department, continuous isoproterenol inhalation therapy has been conducted on status asthmatics over the last 10 years. In the present study, we investigated whether there are any differences in the therapeutic efficacy of continuous inhalation of isoproterenol in the presence or absence of respiratory infections which may induce or aggravate asthma attacks. The treatment period was significantly longer in patients with pneumonia. Further prolongation of the treatment period was noted in patients with atelectasis. However, there were no apparent differences in therapeutic efficacy according to age or the severity of attacks. These findings suggest that continuous inhalation of isoproterenol is very effective for status asthmatics if respiratory infections are thoroughly controlled.