Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

Development of Selective TGR5 Ligands Based on the 5,6,7,8-Tetrahydro-5,5,8,8-tetramethylnaphthalene Skeleton

TGR5, a G-protein-coupled receptor (GPCR), plays an important role in several physiological functions. TGR5 activation through bile acids induces an increase in energy expenditure. Therefore, synthetic TGR5 ligands could be useful for the treatment of obesity or dyslipidemia. In this study, we designed and synthesized a set of TGR5 ligands with a 5,6,7,8-tetrahydro-5,5,8,8-tetramethylnaphthalene (TMN) skeleton, and evaluated their TGR5 agonistic activity. We also investigated the selectivity of the synthesized compounds for TGR5 relative to the farnesoid X receptor (FXR) and retinoic acid receptor (RAR). Our results show that compound 4 b [N-(2-chlorophenyl)-5,6,7,8-tetrahydro-5,5,8,8-tetramethyl-2-naphthalenecarboxamide] exhibited potent TGR5 agonist activity with an IC₅₀ value of 8.4 nM without significant cytotoxicity. In addition, compound 4 b showed only slight agonistic activity toward FXR and RAR at 1 μM treatment. These data indicate that compound 4 b is a selective TGR5 agonist, and could be a promising therapeutic agent for dyslipidemia.     

Sweeteners interacting with the transmembrane domain of the human sweet-taste receptor induce sweet-taste synergisms in binary mixtures

Sweet enhancing effect of neohesperidin dihydrochalcone (NHDC) or cyclamate has been reported to be synergistic in human sensory tests. However, little is known about whether these synergisms are caused by the mechanism mediated by the human sweet-taste receptor. Here, we examined the sweetness intensity of sweet tastant mixtures by measuring the responses of cultured cells stably expressing the human sweet-taste receptor. The results showed that the cell response to sucrose was synergistically potentiated by the addition of NHDC or cyclamate. Moreover, a point mutation in the transmembrane domain of hT1R3 almost completely eliminated the enhancing effects of NHDC and cyclamate. These results suggest that ligand–receptor interactions in the transmembrane domain of hT1R3 are necessary for NHDC and cyclamate to elicit the synergistic potentiation of the receptor activation. Our results may provide the foundation of a molecular basis for receptor-based synergisms of sweet tastes in mixtures of diverse sweet substances.     

Modeling and optimizing a sub-centralized LED lamps provision system for rural communities

Providing clean and sustainable energy for all is an ever elusive challenge, especially encountered in remote and poor rural areas. Cost-effective solutions have been found through renewable energy systems (RES) which, when combined with specialized products like rechargeable lamps using light emitting diodes (LED), can provide the basic energy needs (lighting) of rural homes, while replacing fossil-fuel based energy sources (e.g. kerosene lamps). The investigation presents an LED lamps provision system which circumvents the cost and technical challenges that currently hamper LED lamps diffusion into communities. Based on an actual rural island case (Pangan-an Island, Philippines), a sub-centralized lamp rental and charging system was mathematically modeled and analyzed (analytically and numerically) to identify the optimal states and policies, along with the effects of certain parameters, which promote financial viability and supply sustainability. It was found that a dynamically optimized lamp(s) purchase policy yields better financial returns than a statically optimized policy. Furthermore, it was realized that a sub-centralized lamps rental approach can serve as a complementary energy provision system for rural electrification projects by providing for the lower-tier energy demand market of low income users within a community.     

Thermal and mechanical properties of bio-based polymer networks by thiol-ene photopolymerizations of gallic acid and pyrogallol derivatives

Allylated pyrogallol (A3PG) and acrylated pyrogallol (Ac3PG) as bio-based trienes, and allylated gallic acid (A4GA) and acrylated allyl gallate (Ac3A1GA) as bio-based tetraenes were synthesized from pyrogallol and gallic acid, respectively. Thiol-ene photopolymerizations of the bio-based polyenes and a pentaerythritol-based primary tetrathiol (pS4P) at the allyl/SH ratio of 1/1 produced photo-cured resins (A3PG-pS4P, Ac3PG-pS4P, A4GA-pS4P and Ac3A1GA-pS4P). The FT-IR spectral analysis revealed that thiol-ene reactions of thiol/allyl and thiol/acryloyl groups smoothly proceeded. Gel fractions of acryl-based cured resins were a little higher than those of allyl-based cured resins. The swelling test and dynamic mechanical analysis revealed that GA- and acryl-based cured resins exhibited higher crosslinking densities than PG- and allyl-based cured resins, respectively. A higher order of tan δ peak temperature was Ac3PG-pS4P (48.3 ° C) > Ac3A1GA-pS4P (24.1 ° C) > A4GA-pS4P (22.1 ° C) > A3PG-pS4P (?7.8 ° C). Ac3PG-pS4P displayed the highest 5 % weight loss temperature, tensile strength and tensile modulus among all of the cured resins.     

A Study of Mutual Coupling between Vertical Grounding Electrodes

This paper investigates the mutual grounding impedance between vertical grounding electrodes based on field measurements and FDTD simulations. In the case of vertical electrodes, the mutual impedance between the electrodes is almost completely independent of the electrode length, and thus the induced voltage is nearly constant as the electrode length becomes longer. This characteristic is different from that of an overhead conductor, where the electromagnetic‐induced voltage is proportional to the conductor length. The greater the separation distance between the electrodes, the smaller the induced voltage, as in the case of an overhead conductor. The propagation speed increases as the separation increases. It is found that the speed is not necessarily proportional to the inverse of the relative permittivity of the earth.     

Effect of friction stir processing on microstructure of laser clad cobalt-based alloy

(The microstructural refinement of cobalt-based alloy (Stellite No. 6) by laser cladding and friction stir processing (FSP) was studied. A nanometer-sized microstructure consisting of fine carbide (particle size: 100–200 nm) and a grain (grain size: 150–250 nm) was successfully fabricated by the FSP on the laser clad cobalt-based alloy. The nanostructured cobalt-based alloy (Stellite No. 6) had an extremely high hardness of about 750 HV.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.