A Hybrid Decoupled Power Flow Method for Balanced Power Distribution Systems

This paper proposes a hybrid decoupled power flow method for balanced power distribution systems with distributed generation sources.The method formulates the power flow equations in active power and reactive power decoupled form with polar coordinates.Second-order terms are included in the active power mismatch iteration,and constant Jacobian and Hessian matrices are used.A hybrid direct and indirect solution technique is used to achieve efficiency and robustness of the algorithm.Active power correction is solved by means of a sparse lower triangular and upper triangular(LU) decomposition algorithm with partial pivoting,and the reactive power correction is solved by means of restarted generalized minimal residual algorithm with an incomplete LU pre-conditioner.Typical distribution generation models and distribution load models are included.The impact of zero-impedance branches is explicitly modeled through reconfiguring of the adjacent branches with impedances.Numerical examples on a sample distribution system with widespread photovoltaic installations are given to demonstrate the effectiveness of the proposed method.     

Size adjustment of spherical temperature-sensitive hydrogel beads by liquid–liquid dispersion using a Kenics static mixer

Temperature-sensitive hydrogel beads were prepared by Kenics static mixer technology. The temperature-sensitive monomer N,N-diethylacrylamide and photo-crosslinkable pre-polymer ENT were used as model hydrogel materials. Drop dispersion of high viscosity polymer material in low viscosity hexadecane was made using the static mixer. Drops of a solution of the mixed materials were rapidly photo-crosslinked by UV irradiation after mixing in the static mixer, and spherical hydrogel beads with narrow, normal size distribution were thus prepared. The Kenics static mixer is a useful device for the preparation of spherical beads of temperature-sensitive hydrogels. The Sauter Mean Diameter of the hydrogel beads swollen in deionized water at 293 K was measured. The experimentally determined dimensionless swollen hydrogel bead diameter was well correlated with the Weber number, degree of swelling and viscosity ratio. The effects of gelation and ENT addition on the bead size were evaluated from the degree of swelling. The correlation equation can be used for size adjustment of temperature-sensitive spherical hydrogel beads.     

Efficient electron transport in 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl and the applications in white organic light emitting devices

The electron transport capability of 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl (α-NPD) was investigated by fundamental physical measurements named as current–voltage (I–V) electrical property evaluation and displacement current measurement (DCM). In electron-dominated devices, the I–V characteristics of α-NPD were similar as that of (8-hydroxyquinolino) aluminum (Alq₃) owing to their same order of electron mobilities. The interface of Al/LiF and α-NPD was proven to be an Ohmic contact through the evaluation of I–V characteristics at low bias regime (<3 V). And an electron injection barrier, 0.21 eV, at Al/LiF/α-NPD was obtained by extrapolating the temperature dependent I–V curves. The electron transport behavior in α-NPD film was further confirmed by DCM evaluations. Furthermore, an efficient white organic light emission device was successfully fabricated by using α-NPD as hole transport layer and electron transport layer, respectively.     

Multi-class grasping classifiers using EEG data and a common spatial pattern filter

This paper describes the classification of various human actions from brain activity. In particular, we focus on grasping movements and estimate grasping patterns from electroencephalogram (EEG) data. EEG data is converted to grasping features by using a common spatial pattern filter (CSP filter), and the features are subsequently classified into grasping categories by using the k-nearest neighbor method. We tested the pipeline of feature extraction and classification on the EEG dataset. The EEG data were acquired while participants grasped an object according to the Cutkosky’s grasping taxonomy, in which grasping movements are categorized into nine power-type grasping patterns and seven precision-type grasping patterns. The best classification rate for 9-class power-type grasping patterns was 48% and for 7-class precision-type grasping patterns was 40%.     

PEI-assisted preparation of Au nanoparticles via reductive crystallization process

Nano-sized gold particles were prepared in a solution containing polyethylenimine (PEI) utilizing a batch reactor. PEI acts as a reducing agent as well as a stabilizing agent of nanoparticles. The effects of initial concentration of PEI on the mean particle diameter, coefficient of variation (C.V.), growth rate, nucleation rate and the number of nuclei were studied. The particle diameter of gold decreased markedly with increasing initial concentration of PEI, from 3.3 μm to a minimum value of about 5 nm. The observed decrease of particle diameter was considered to be caused by the growth-inhibiting effect of PEI, which affects the conclusive number of nuclei.     

A new method for estimating initial rotor phase of self‐excited hybrid‐field synchronous motors

This paper proposes a new method for properly estimating the rotor initial phase (i.e., the position) of the newly emerging self‐excited hybrid‐field synchronous motors (SelE‐HFSMs), which have the rotor held by both a permanent magnet and a diode‐shorted held winding. The proposed method injects a spatially rotating high‐frequency voltage and detects the rotor phase directly by evaluating the norm of the associated current. The method is very simple, but has a high degree of usability. 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(3): 49–58, 2010; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.21027     

Excess micromotion compensation of trapped ions in a linear Paul trap for trace isotope analysis

Excess micromotion of trapped calcium ions was detected and compensated in our linear Paul trap apparatus for trace isotope analysis. The micromotion was detected by Charge-coupled device (CCD). camera and radio frequency (rf) correlation method. We found that 230 and 2280 V of compensation voltages were needed for x- and y-axis compensation in our apparatus, respectively. The z-axis micromotion was confirmed by the experiment and its cause was investigated by finding a shape of z-axis confinement field. The confinement field was indeed distorted in our apparatus and it gave rise to the trapped ion to shift from potential center. And the micromotion of r-direction was transferred to the z-axis by the distorted confinement field. The z-axis micromotion was suppressed by increasing cap voltage of trap.     

Relation Between Foaming and Surface Properties of Detergent-Containing Lubricating Oil

The effect of water concentration on the foaming tendency of lubricating oil containing the detergent additives Ca-phenate and amide was investigated from a surface chemical standpoint. Foam volume, dynamic surface tension and surface viscosity were measured at various water concentrations. It was proved that the increase of surface viscosity with water content was the main factor affecting foaming in the case of Ca-phenate but, in contrast, the Marangoni effect played an essential role in the case of amide.     

Determination of sucralose in foods by HPLC using pre-column derivatization

The development of a sensitive pre-column derivatization high-performance liquid chromatography (HPLC) method for determination of sucralose is reported. Sucralose is converted into a strongly ultraviolet (UV)-absorbing derivative, possessing strong absorption at 260 nm, by treatment with p-nitrobenzoyl chloride (PNBCl). Homogenized samples were dialyzed and washed with a Bond Elut ENV cartridge, then the eluate was evaporated to dryness and the residue was derivatized. Subsequently, the sucralose derivative was purified with hexane-ethyl actate (9:1) in a silica cartridge, and then the sucralose derivative was eluted with acetone. HPLC was performed on a phenyl column, using acetonitrile-water (73:27) as a mobile phase with UV detection (260 nm). The calibration curve was linear in the range of 1 microgram/mL to 50 micrograms/mL of sucralose. The recoveries of sucralose from eight kinds of foods spiked at the levels of 0.20 and 0.05 g/kg of sucralose were more than 76.2% with SD values in the range from 0.90% to 4.31%. The quantitative limit of the developed method was 0.005 g/kg for sucralose in samples.     

Contents of barbaloin-related compounds in aloe drinks and their change during storage

The contents of barbaloin (BA), isoBA, aloin-dimers A, B, C, D and aloe-emodin (AE) in aloe drinks were investigated. BA and isoBA were detected in 30 of the 31 samples at the levels of 120-570 micrograms/mL and 120-580 micrograms/mL, respectively. Aloin-dimers A, B, C and D were detected in 8 of the 31 samples at the levels of 12-38 micrograms/mL, 13-39 micrograms/mL, 11-36 micrograms/mL and 16-69 micrograms/mL, respectively. AE was detected in all of the 31 samples at the levels of 0.03-1.3 micrograms/mL. When aloe drinks were stored for 4 weeks at 5 degrees C after opening the bottle, decrease of BA and isoBA, and increase of AE and aloin-dimers A, B, C and D were observed in most cases. However, in a few aloe drinks, all of BA, isoBA, aloin-dimers A, B, C, D and AE decreased. In these drinks, the existence of aloin-trimer was elucidated by LC/MS analyses. These data suggested that BA in aloe drinks is converted to the dimer and then to the trimer during storage.