Electric transfer function model of switched reluctance motors and model‐based current control design

This paper presents a current control design for switched reluctance motors (SRMs). The electric transfer characteristic of the motors is studied first. Their transfer function is shown to be expressible by a pure resistive component, which is not constant but varies depending on the motor current and speed. The current control design for SRMs follows the classical design technique used for DC machines, where the zeros of the PI controller cancel the poles of Ls+R. Because the transfer function of SRMs does not have any poles, an I controller is suitable for them. The integral gain should be adjusted in order to compensate the nonlinearity, that is, the variation in the equivalent resistor of the SRMs' transfer function. The values of the integral gain are tuned and tabulated for the motor speed and current. Simulation and experiment demonstrate that the current and speed of the SRMs present good responses without dependence on the motor speed and current. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(1): 51–59, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20987     

Morphology of CuO through precipitation process under 2.45 GHz microwave irradiation

The morphology of CuO powders formed by a homogeneous precipitation process from aqueous copper precursor complex was investigated. The effect of 2.45 GHz microwave irradiation appeared in the characteristic morphology of the CuO microcrystal with comparison of an ordinal synthesis process. The crystallographic orientation of CuO microcrystals in the particle was examined by HRTEM. Using microwave irradiation, it was demonstrated that the morphology of the particles was kept through the decomposition of the precursor. Also the rapid transformation of a precursor to CuO in aqueous solution under microwave irradiation condition was discussed.     

Determination of potent odorants in apple by headspace gas dilution analysis

Gas chromatography-olfactometry with headspace gas dilution analysis was used to evaluate the odor potencies of volatile compounds in Fuji apple. To improve the resolution of volatile compounds, the dilution analysis was conducted on two types of capillary columns with different polarities. Thirty three and 20 compounds were identified on DB-WAX and DB-5 columns, respectively. Methyl 2-methylbutanoate, isobutyl acetate, ethyl butanoate, ethyl 2-methylbutanoate, isopentyl formate, butyl acetate and hexyl acetate as well as hexanal were important odor contributors in the headspace gas of apple on the basis of high Flavor Dilution (FD) factors. Threshold values-in-air of these compounds were also estimated from the relationships between their FD factors and concentrations. Methyl 2-methylbutanoate and ethyl 2-methylbutanote were considered as the most potent odorants because of their lowest threshold values. In addition, the threshold values-in-air of isopentyl formate, isopentyl acetate and butyl isobutanoate, which have never been reported, were estimated at 0.149, 1.95 and 0.00607 μl/l, respectively.     

Comparison of single sample methods for determination of plasma clearance using 99mTc-MAG3

We compared relationship among three single blood sampling methods which have been proposed for determination of plasma clearance with 99mTc-MAG3. Russell's and Bubeck's algorithms were employed for 48 adults (average age: 53 years) and Bubeck's and Piepsz's algorithms were used in 9 children (average age: 5.8 years). Three methods showed very high correlation among them. However, Russell's and Piepsz's methods were about 1.4 times higher than Bubeck's method in calculating plasma clearance of 99mTc-MAG3. The present study indicates that three methods discussed here are useful for the determination of plasma clearance with 99mTc-MAG3. In addition, Bubeck's method may be preferable as a reference for single plasma sampling method because of common application to adults and children.     

Mating-induced mating-type cassette conversion in Saccharomyces cerevisiae

We have previously reported that the HMRa-bearing restriction fragment of a rho degrees sir4-11 strain (HMLalpha-MATalpha-HMRa), which acts as an alpha-mater because of being rho degrees , changes its electrophoretic mobility when the strain mates with a certain group of a-mating strains (HMLalpha-MATa-HMRa). In this study, we found that the sir4-11 strain being rho degrees was not essential for this phenomenon and also that the altered form of the fragment contained HMRalpha in place of HMRa. Furthermore, we observed conversion of HMLa to HMLalpha in the cross in which a sir4-11 HMLa-MATalpha-HMRalpha strain was mated with a representative of the above-mentioned a-mating strain. In addition, when this a-mating strain was mated with a SIR(+) HMLalpha-MATa-HMRalpha strain, the resultant diploid was found to be HMLalpha/HMLalpha MATa/MATalphaHMRa/HMRalpha, indicating that conversion of MATa to MATalpha had taken place in the course of mating. From all these observations, we conclude that there is a group of S. cerevisiae strains that carries factor(s) that induces conversion of a mating-type cassette of the mating partner to alpha mating-type cassette and that this mating type cassette conversion takes place in all three mating type loci, HML, MAT and HMR, if the loci are in the non-silenced condition.     

Characteristics of neutralization of acids by newly isolated fungal cells

Soil microorganisms play an important role in maintaining soil pH at levels suitable for other soil organisms. To clarify the biological neutralization mechanism in soil, we isolated soil microorganisms showing a high ability to neutralize acids and studied their characteristics. From our taxonomic study, three isolated strains were identified as filamentous fungi, namely Mucor sp., Aspergillus fumigatus, and Aureobasidium pullulans. These strains could secrete basic materials, such as ammonia, for neutralization, grow in the medium at pH 4.0 and increase the pH of the medium to approximately 8.0. These microbial cells could neutralize not only nitric acid but also sulfuric and hydrochloric acids. The strains could also grow by utilizing nitric acid as a sole nitrogen source. In the soil containing these organisms, the pH was maintained in the neutral range by the buffering action of basic materials that they secrete. These results suggest that these fungal cells are useful for protecting the soil from acidification by acid rain.     

Spinning of the solutions of poly(vinyl alcohol)/NaCl/H2O systems and their fiber properties

The NaCl/water solutions of commercial poly(vinyl alcohol) (a-PVA) with the degrees of polymerization and saponification of 1730 and 99.39%, respectively were gel-spun into methanol (–30°C) and then the removed NaCl dry-filaments were drawn at 200°C. The draw ratio showed the maximum at NaCl concentration C _N = 3 wt% (polymer concentration C _P = 150 kg/m³). The Young's modulus and strength at break were 95 and 6 GPa ( = 19). In the case of DMSO system (C _P = 170 kg/m³), the Young's modulus was 52 GPa ( = 25) and the strength at break was 3.3 GPa. Under a polarized microscope, the fine lateral structure was observed for the DMSO system, but not for the NaCl system, that is, the smooth structure was recognized. The smooth structure, like a Netlon packing net for oranges, might be considered to result in heightening of mechanical properties.     

Evaluation of the Fracture Strength for Silicon Carbide Layers in the Tri-Isotropic-Coated Fuel Particle

A program to develop new methods to measure the fracture strength of the chemical vapor deposition SiC coatings in nuclear fuel particles has been carried out. Internal pressurization and crush test techniques were developed and applied to prototype-sized tubular and hemispherical shell specimens. The fracture strength measured from each test method applying the Weibull two-parameter distribution, and Weibull parameters were measured. It was shown that data generated with each test technique were independent of the test technique applied. This implies that the developed test methods are reliable and provide reasonable strength data. For the same material, fracture strength varied with the specimen geometry and loading configuration. These size and loading configuration effects on the fracture strength are explained with the concept of effective surface.     

岩石中稀土元素中子活化分析时Na、Sc、Fe Cr等干扰元素的去除

稀土元素的分离、分析,在地球化学、宇宙化学、环境化学等学科中起着极为重要的作用。近年来,国内外利用高分辨率γ谱仪中子活化分析法测定岩石中稀土元素的报道很多,虽然对放射化学分析流程都在不同程度上有所改进,但对超基性岩石中大量存在的~(24)Na、~(46)Sc、~(59)Fe和~(51)Cr等核素的去除,解决被测元素γ谱之间相互干扰(包括重峰干扰和康普顿本底干扰)