High-aspect-ratio through-hole array microfabricated in a PMMA plate for monodisperse emulsion production

Microchannel (MC) emulsification is a promising technique for producing monodisperse emulsions consisting of highly uniform droplets. The authors developed a high-aspect-ratio microstructure (HARMST) made of poly(methyl methacrylate) (PMMA) as a new MC emulsification device. A PMMA straight-through MC array plate consisting of 31,250 through-holes with a 7.3 × 22.9-μm oblong section and a 200-μm depth was fabricated by a process of synchrotron radiation (SR) lithography and etching. Oblong MCs fabricated in a PMMA straight-through MC array were highly uniform with a coefficient of variation of less than 2%. The fabricated PMMA straight-through MC array plate was used to produce water-in-oil (W/O) emulsions. Monodisperse W/O emulsions with average droplet diameters of approximately 25 μm and a minimum coefficient of variation of 3.2% were produced via a hydrophobic PMMA straight-through MC array. The PMMA straight-through MC array plate also produced monodisperse W/O emulsions at droplet production rates of up to 1.7 × 10⁴/s. The PMMA straight-through MC array plates developed in this work are expected to expand the application field of emulsification using straight-through MC array plates, which have previously been made of single-crystal silicon.     

Banded structure and its distribution in friction stir processing of 316L austenitic stainless steel

Banded structures, which vary with welding parameters, were observed in friction stir processing of 316L austenite stainless steel. Sigma phase precipitation was detected in banded structures by transmission electron microscopy. The amount of banded structure had direct ratio relations with heat input. The higher the heat input, the larger the area of banded structures. This is attributable to slower cooling rate at high heat input, which results in longer exposure to the temperature range for precipitation. The formation of sigma phase produced Cr depletion, which resulted in largely degraded corrosion resistance. The present study suggests that low heat input (i.e. low rotation speeds, low working loads and high welding speed) contributes to restrain sigma phase precipitation.     

Group Symmetry in Interior-Point Methods for Semidefinite Program

A class of group symmetric Semi-Definite Program (SDP) is introduced by using the framework of group representation theory. It is proved that the central path and several search directions of primal-dual interior-point methods are group symmetric. Preservation of group symmetry along the search direction theoretically guarantees that the numerically obtained optimal solution is group symmetric. As an illustrative example, we show that the optimization problem of a symmetric truss under frequency constraints can be formulated as a group symmetric SDP. Numerical experiments using an interior-point algorithm demonstrate convergence to strictly group symmetric solutions.     

Preliminary study of sintering zero-rupture Fully Ceramic Microencapsulated (FCM) fuel

The demonstration of industrially feasible zero-rupture Fully Ceramic Microencapsulated (FCM) fuels has been achieved via layers of fuel particles vertically stacked and consolidated by Pulsed Electric Current Sintering. Uniaxial shrinkage, a key component of fuel arrangement, was analyzed via SEM, XRD and computational analyses, using cylindrical geometries from 0.25 to 1.5 “height-to-diameter” (h/d) aspect ratio. Bulk densities of ~3.1 g/cc were achieved on pellets at h/d ~0.25, using a ramp rate of 100°C per min to 1825°C and holding for 10 minutes with 10 MPa applied pressure. Using the same parameters, this value reduced to ~2.8 g/cc at h/d ~1.5. More extensive percolation of oxide sintering additives and earlier closure of interconnected pores in extreme ends of the pellet was attributed to higher temperatures in those regions. The top and bottom of the pellet densify before the center, also resulting reduced displacement between the fuel layers in these regions. Parametric studies of sintering with different temperature and time, with support of computational analyses, was used to map expected temperature distribution and sintering behavior. These tools will be used for further optimization of FCM fuel fabrication.     

U.H.F. low-noise GaAs m.e.s.f.e.t. amplifier for colour t.v. broadcasting translator

Low-noise amplifiers for u.h.f. colour t.v. broadcasting translator use have been successfully developed by using 1 ?m gate GaAs m.e.s.f.e.t.s. The obtained performances revealed that a GaAs m.e.s.f.e.t. has low-noise and low intermodulation distortion characteristics, even in the 500?800 MHz frequency range, compared with a Si bipolar transistor.     

JSFR key technology evaluation on fuel handling system

A simplified fuel handling system design for the demonstration Japan sodium-cooled fast reactor (JSFR) has been proposed. Fast Reactor Cycle Technology Development project phase I results of key technology evaluations on a pantograph fuel handling machine (FHM), a fuel transfer pot with two core component positions, dry spent fuel cleaning and minor actinide-bearing fresh fuel shipping cask are summarized. A full-scale FHM mockup has been fabricated and tested in the air accumulating performance and seismic tolerance data. A mockup fuel transfer pot with fins and chromium carbide coating has been fabricated and tested with sodium accumulating heat transfer performance data. Several sodium cleaning tests using a dummy subassembly has been conducted accumulating cleaning performance data. For fresh fuel shipping cask, a design tool for evaluation of heat transfer capability has been developed and a helium gas cask shows cooling capability of minor actinide-bearing fresh fuel. Those experimental and analytical efforts have shown that key technologies to develop simplified fuel handling system are matured enough to proceed large-scale sodium experiments and conceptual design study for the demonstration JSFR.     

Effects of parent Shamo cocks on the histochemical properties of M. iliotibialis lateralis and M. supracoracoideus on their crossbred broilers

Histochemical studies of mammary gland sections obtained from healthy lactating Prim' Holstein cows contained numerous corpora amylacea, mainly located in active alveoli. Observations by electron microscopy revealed a cauliflower shape, with a fibrillar or multilayered organization. Mineral studies confirmed the presence of high calcium levels (12.3% of dry matter) and phosphorus (7.4%) in the corpora amylacea composition. These bodies stained positive to Von Kossa silver nitrate and to Periodic acid-Schiff. However, depending on the gland of origin, corpora amylacea stained positive or negative to Congo red. Histochemical studies seemed, therefore, insufficient to determine the presence or absence of amyloid. The amount of total protein varied by approximately 25%. Immunoblotting and analysis of the amino acid sequence of a peptidic fragment obtained from corpora amylacea gave clear evidence of the occurrence of caseins, beta-lactoglobulin and alpha-lactalbumin. However, the comparison between the amino acid composition of corpora amylacea and those of the main milk proteins indicated the presence of other proteins. Electrophoretic analysis also gave evidence of the presence of several other proteins, i.e. glycoproteins. Therefore, it is probable that corpora amylacea composition is much more complex than previously reported.     

Extracellular adenosine 5'-triphosphate induces Ca2+ efflux from freshly isolated adult rat cardiomyocytes: possible involvement of Na+/Ca2+ exchange mechanism

In the present study, we examined the effect of extracellular adenosine 5'-triphosphate (ATP) on Ca2+ efflux from freshly isolated adult rat cardiomyocytes. ATP at 1 mM caused a release of 3.6+/-0.08% of the total cellular content. The 45Ca2+ efflux from the cells was also stimulated by adenosine-5'-O-(3-thiotriphosphate) (ATP-gamma s), alpha, beta-methylene-ATP and adenosine 5'-diphosphate (ADP), but not by adenosine 5'-monophosphate (AMP) or adenosine. The effect of ATP was inhibited by a known purinergic P2-receptor antagonist, but not by a P1-receptor antagonist. From these results, it is conceivable that the effect of ATP on Ca2+ efflux from cardiomyocytes is mediated through P2-purinoceptors. It was also observed that ATP caused a rise in [Ca2+]i to almost 200 nM. The ATP-stimulated 45Ca2+ efflux was not affected by removal of extracellular Ca2+, but was dependent on the presence of extracellular Na+. Moreover, ATP caused a 22Na+ influx into the cells of about 2.0-fold over the basal value. These result suggest that ATP stimulates extracellular Na+-dependent 45Ca2+ efflux from freshly isolated adult rat cardiomyocytes, probably through its stimulatory effect on plasma membrane P2-purinoceptors which may couple to Na+/Ca2+ exchange.