Validation of Platelet Counting Accuracy With the Celltac F Automated Hematology Analyzer

Rapid and accurate analysis of platelet count plays an important role in evaluating hemorrhagic status. Therefore, we evaluated platelet counting performance of a hematology analyzer, Celltac F (MEK-8222, Nihon Kohden Corporation, Tokyo, Japan), that features easy use with low reagent consumption and high throughput while occupying minimal space in the clinical laboratory. All blood samples were anticoagulated with dipotassium ethylenediaminetetraacetic acid (EDTA-2K). The samples were stored at room temperature (18^{^}C–22^{^}C) and tested within 4 hours of phlebotomy. We evaluated the counting ability of the Celltac F hematology analyzer by comparing it with the platelet counts obtained by the flow cytometry method that ISLH and ICSH recommended, and also the manual visual method by Unopette (Becton Dickinson Vacutainer Systems). The ICSH/ISLH reference method is based on the fact that platelets can be stained with monoclonal antibodies to CD41 and/or CD61. The dilution ratio was optimized after the precision, coincidence events, and debris counts were confirmed by the reference method. Good correlation of platelet count between the Celltac F and the ICSH/ISLH reference method (r = 0.99, and the manual visual method (r= 0.93) were obtained. The regressions were y = 0.90 x+9.0 and y=1.11x+8.4, respectively. We conclude that the Celltac F hematology analyzer for platelet counting was well suited to the ICSH/ISLH reference method for rapidness and reliability.     

A highly stable and efficient catalyst for direct synthesis of LPG from syngas

Liquefied petroleum gas (LPG) fuel was directly synthesized from syngas over a hybrid catalyst which contained a methanol synthesis catalyst and zeolite. The new hybrid catalyst composed of (Pd–Ca/SiO₂) and β-zeolite, showed a high activity and selectivity for LPG production. X-ray diffraction (XRD) characterization of the catalyst was used to analyze the deactivation of (Pd–Ca/SiO₂)/β-zeolite.     

The study of polymers by high-temperature ATR spectroscopy

A new high-temperature attenuated total reflectance apparatus (HATR) was constructed and used at different temperatures for making infrared measurements on the same liquid or solid sample. It was found that this method was applicable to the continuous quantitative analysis of changes occurring during chemical reactions such as polymerization, isomerization, and crosslinking. In the bulk polymerization of styrene, the process of monomer consumption could be followed progressively. In the crosslinking reaction of high cis-polybutadiene by sulfur-accelerator or peroxide crosslinking systems, the decrease of cis content and its partial isomerization to trans structure was measured. Furthermore, in the crosslinking reaction of ethylene–propylene terpolymers (EPDM), the consumption of double bonds was observed over the course of the reaction with both sulfur-accelerator and peroxide crosslinking systems. The effect was greatest in the case of methylenenorbornene-type EPDM.     

E.s.r. study of annealing and melting effects on the molecular motion of spin trapped chain-end radicals located on the polyethylene surface

E.s.r. spectra of chain-end spin labels on the surface of polyethylene powder were obtained for high and low density polyethylene samples at various stages of heat treatment process. The subsequent crystalline structures of the samples were examined with wide angle and small angle X-ray diffraction spectra. The effects of annealing on the motion of the labels were dependent on annealing temperature and the type of the samples. Higher temperature annealing decreased the rotational correlation times (τ_c) and their activation energy in high density polyethylene but did not affect those of low density polyethylene. Melting decreases the values of τ_c and ΔE for both high an low density polyethylene samples. The cause of these decreases were attributed to the changing of the sites of the chain-end labels. The motion of the labels appeared to be influenced by the local segmental motion of the polymer main chains.     

The European,Japanese and US protective helmet,gloves and boots for firefighters: thermoregulatory and psychological evaluations

The purpose of this study was to investigate the physiological and subjective responses of the European, Japanese (JPN) and US firefighters' helmet, gloves and boots for international standardisation. Three experimental conditions were evaluated (clothing mass: 9.4, 8.2 and 10.1 kg for the three conditions, respectively) at the air temperature of 32°C and 60% relative humidity. The results showed that there was no significant difference among the three conditions in oxygen consumption, heart rate, total sweat rate, rectal temperature and mean skin temperature, whereas peripheral temperatures and subjective perceptions were lower in the JPN condition than in the other conditions (P < 0.05). These results indicate that a 0.5-kg reduction in helmet mass and a 1.1-kg reduction in boot mass during exercise resulted in a significant decrease in head and leg temperatures and subjective perceptions, while a 1.9-kg reduction in total clothing mass had insignificant influences on the metabolic burden and overall body temperature.     

Oxidation of synthetic triacylglycerols containing eicosapentaenoic and docosahexaenoic acids: Effect of oxidation system and triacylglycerol structure

Thirteen synthetic triacylglycerols (TAG) containing eicosapentaenoic acid (EPA) or docosahexaenoic acid (DHA) were oxidized in the presence of 2,2′-azobis(2,4-dimethyl-valeronitrile) (AMVN) and 2,2′-azobis(2-amidinopropane)dihydrochloride (AAPH) as aqueous and nonaqueous radical initiators to investigate the influence of TAG structure and oxidation system on the oxidative stability of TAG that contain highly unsaturated fatty acids (HUFA). A 2:1 (mol/mol) mixture of trieicosapentaenoylglycerol and tripalmitoylglycerol was most susceptible to the AMVN-initiated oxidation among three types of TAG that contained EPA and palmitic acid (2:1, mol/mol). Compared with 1,2 (or 2,3)-dieicosapentaenoyl-3(or 1)-palmitoylglycerol (EEP) and 1,3-dieicosapentaenoyl-2-palmitoylglycerol (EPE), the oxidative rate of EEP was somewhat higher. A similar result was obtained for DHA-containing TAG. The oxidative rate of TAG that contained EPA and palmitic acid (1:2, mol/mol) showed a positive correlation with the amount of EPA in a single TAG molecule. Moreover, in the nonaqueous system, the oxidative rate of EPA-containing TAG was affected by unsaturation and carbon chainlength of constituent fatty acids. In the AAPH-initiated oxidation in the aqueous system, the oxidative rate of TAG with EPA and palmitic acid was higher with the increased quantity of EPA in a single TAG molecule. Also, constituent fatty acids modified the oxidative rate of EPA-containing TAG in an aqueous system. The glycerol position of EPA and DHA also affected the oxidative rate of the TAG. EPA and DHA located at the 1,2 (or 2,3)-position of glycerol were more oxidizable than those at the 1,3-position during AAPH-initiated oxidation. Thus, 1,2(or2,3)-dipalmitoyl-3(or 1)-eicosapentaenoylglycerol was oxidized faster than 1,3-dipalmitoyl-2-eicosapentaenoylglycerol. These observations suggest that the oxidative stability of TAG that contain HUFA could be modulated by the oxidation system and TAG structure.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

Glass transition behavior of emulsion-polymerized polymer films containing a surface-active agent

The glass transition behavior of emulsion-polymerized poly(methyl methacrylate) and polystyrene films containing sodium laurylsulfate as emulsifier was studied by measurements of dynamic mechanical properties and thermal depolarization current. The film specimens of the emulsion-polymerized polymers were prepared by casting from their benzene solutions. The glass transition temperatures of the emulsion-polymerized films are higher than those of the bulk-polymerized films. The higher glass transition temperature of the emulsion-polymerized films is attributed to the colloidal properties of sodium laurylsulfate in the process of the film formation. The restriction of the molecular chains in the emulsion-polymerized films is attributed to the interaction between the hydrophobic groups of sodium laurylsulfate and the polymer molecules.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Decomposition of Carbon Dioxide to Carbon with Active Wustite at 300°C

Active wustite (FeδO, with a δ value of 0.98) was prepared by keeping normal wustite (δ value of 0.94) in a N₂ atmosphere at 300°C for 10 min. This reaction is given by (4δ₂–3)Fe_δ1O→(4δ₁–3)Fe_δ2O + (δ₂–δ₁)Fe₃O₄ where δ₁= 0.94 and δ₂= 0.98. The equation indicates that the normal wustite undergoes eutectoid decomposition into active wustite and stoichiometric magnetite (Fe₃O₄). Carbon dioxide (1.013 × 10⁵ Pa) was almost completely (100%) decomposed into carbon (zero valence) by the active wustite at the low temperature of 300°C, which was associated with the transformation of the active wustite into the stoichiometric magnetite. The internal pressure of the reaction cell eventually became a vacuum.