Effects of 4He impurities on 3He nuclear spin-lattice relaxation in hcp solid 3He

Nuclear spin-lattice relaxation properties of hcp solid ³He with ⁴He impurities have been studied. At temperatures below the exchange plateau region, three kinds of relaxation time were observed. To analyze the data, a phenomenological four-bath model was developed, the four baths being the Zeeman bath, the phonon bath, an X-bath, and a Y-bath. The X-bath consists of the exchange bath and a part of the ⁴He-⁴He elastic interaction bath. The Y-bath is the main part of the elastic interaction bath. We measured the concentration dependence of the energy constants of all the baths, as well as the temperature and concentration dependences of the three kinds of relaxation time. The relaxation behavior corresponding to the process between the X-bath and the Y-bath could not be expressed by a single exponential function of time and the relaxation rate was strongly dependent on the concentration. This process may be related to the internal thermal equilibrium process within the elastic interaction bath. The impurity-dependent relaxation time between the X-bath and the phonon bath had a temperature dependence of T ^–n with n = 7.4±0.3.     

Effects of heated seats in vehicles on thermal comfort during the initial warm-up period

Eight subjects participated in a subjective experiment of eight conditions to investigate the effects of heated seats in vehicles on skin temperature, thermal sensation and thermal comfort during the initial warm-up period. The experimental conditions were designed as a combination of air temperature in the test room (5, 10, 15, or 20 °C) and heated seat (on/off). The heated seat was effective for improving thermal comfort during the initial warm-up period when air temperature was lower than 15 °C. Use of heated seats prevented decreases in or increased toe skin temperature. Heated seats also increased foot thermal sensation at 15 and 20 °C. Optimal thermal sensation in contact with the seat was higher when air temperature was lower. Optimal skin temperature in contact with the seat back was higher than that with the seat cushion. Moreover, these optimal skin temperatures were higher when air temperature was lower.     

Agglomeration control of hydroxyapatite nano-crystals grown in phase-separated microenvironments

Materials synthesis processes that require high temperatures consume large quantities of energy that generate an environmental burden. We attempted to synthesize hydroxyapatite (HAp) nano-crystals without firing or melting. “Water in oil” (W/O) emulsions were employed as microreactors for HAp formation. The surfactant-bounded water mediated HAp crystal nucleation, and HAp nano-crystallites were obtained. The obtained particles were aggregates composed of plate-like nano-crystals and monodisperse tiny crystals. Utilization of the W/O emulsions resulted in tunable nucleation frequency and the reactant provision, and yielded HAp nano-crystals with characteristic agglomeration properties.     

Development of a simple method for fabrication of transparent conductive films with high mechanical strength

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.     

Nanocube Superlattices of Cesium Lead Bromide Perovskites and Pressure‐Induced Phase Transformations at Atomic and Mesoscale Levels

Lead halide perovskites are promising materials for a range of applications owing to their unique crystal structure and optoelectronic properties. Understanding the relationship between the atomic/mesostructures and the associated properties of perovskite materials is crucial to their application performances. Herein, the detailed pressure processing of CsPbBr₃ perovskite nanocube superlattices (NC‐SLs) is reported for the first time. By using in situ synchrotron‐based small/wide angle X‐ray scattering and photoluminescence (PL) probes, the NC‐SL structural transformations are correlated at both atomic and mesoscale levels with the band‐gap evolution through a pressure cycle of 0 ? 17.5 GPa. After the pressurization, the individual CsPbBr₃ NCs fuse into 2D nanoplatelets (NPLs) with a uniform thickness. The pressure‐synthesized perovskite NPLs exhibit a single cubic crystal structure, a 1.6‐fold enhanced photoluminescence quantum yield, and a longer emission lifetime than the starting NCs. This study demonstrates that pressure processing can serve as a novel approach for the rapid conversion of lead halide perovskites into structures with enhanced properties.     

Character animation creation using hand-drawn sketches

To create a character animation, a 3D character model is often needed. However, since humanlike characters are not rigid bodies, to deform the character model to fit each animation frame is tedious work. Therefore, we propose an easy-to-use method for creating a set of consistent 3D character models from some hand-drawn sketches while keeping the projected silhouettes and features of the created models consistent with the input sketches. Since the character models possess vertexwise correspondences, they can be used for frame-consistent texture mapping or for making character animations. In our system, the user only needs to annotate the correspondence of the features among the input-vector-based sketches; the remaining processes are all performed automatically.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Modeling method of fast transient for unsymmetrical stray capacitance to ground

Transient characteristic of power system apparatus in a high‐frequency region should be modeled with stray capacitors. Pi‐type circuit is commonly used to represent the stray capacitors between terminals and those to the ground. A modeling method for the pi‐type circuit with unsymmetrical stray capacitances to ground is proposed in this paper. To obtain the unsymmetrical stray capacitances to ground, a couple of differential‐mode measurements are interchangeably applied. The parameters of the pi‐type circuit can be determined by the measurements with a common‐mode measurement. A nonlinear least‐squares method is used to estimate the capacitances. The method is applied to compose an equivalent circuit of a miniature circuit breaker (MCB), which has unsymmetrical stray capacitances to ground. The application is not only for the MCB but also for a scaled model of a high‐voltage circuit breaker. A gas‐filled arrester is used as a voltage sensor for the test because the voltage across the stray capacitor cannot be directly measured due to the input capacitance of a voltage probe. A transient response of the MCB with the gas‐filled arresters is numerically simulated to show the usefulness of the equivalent circuit. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Influence of swelling of noncrystalline regions in silk fibers on modification with methacrylamide

The degrees of swelling of noncrystalline regions of domestic and tussah silk fibers were investigated by measuring the small-angle X-ray scattering intensity of the fibers in wet conditions and analyzing the scattering intensity based on a two-phase model, i.e., crystalline regions and water-swollen noncrystalline regions. The influence of the degree of swelling of noncrystalline regions on the graft treatment of these fibers with methacrylamide was investigated. The changes in the structure caused by the graft treatment were also analyzed using the wide-angle X-ray diffraction measurements. As compared with the tussah silk fibers, the domestic silk fibers showed a larger degree of swelling of the noncrystalline regions, and gained a larger amount of resin by the graft treatment. The crystallites with smaller sizes in the tussah silk fibers were destroyed preferentially by the graft treatment. For the domestic silk fibers, the crystallites were destroyed more seriously and rather homogeneously independent of the crystallite sizes. © 1996 John Wiley & Sons, Inc.     

The Effect of Sodium-Dependent Glucose Cotransporter 2 Inhibitor Tofogliflozin on Neurovascular Coupling in the Retina in Type 2 Diabetic Mice

We investigated the effect of tofogliflozin, a sodium-dependent glucose cotransporter 2 inhibitor (SGLT2i), on retinal blood flow dysregulation, neural retinal dysfunction, and the impaired neurovascular coupling in type 2 diabetic mice. Tofogliflozin was added to mouse chow to deliver 5 mg/kg/day and 6-week-old mice were fed for 8 weeks. The longitudinal changes in the retinal neuronal function and blood flow responses to systemic hyperoxia and flicker stimulation were evaluated every 2 weeks in diabetic db/db mice that received tofogliflozin (n =6) or placebo (n = 6) from 8 to 14 weeks of age. We also evaluated glial activation and vascular endothelial growth factor (VEGF) expression by immunofluorescence. Tofogliflozin treatment caused a sustained decrease in blood glucose in db/db mice from 8 weeks of the treatment. In tofogliflozin-treated db/db mice, both responses improved from 8 to 14 weeks of age, compared with vehicle-treated diabetic mice. Subsequently, the electroretinography implicit time for the oscillatory potential was significantly improved in SGLT2i-treated db/db mice. The systemic tofogliflozin treatment prevented the activation of glial fibrillary acidic protein and VEGF protein expression, as detected by immunofluorescence. Our results suggest that glycemic control with tofogliflozin significantly improved the impaired retinal neurovascular coupling in type 2 diabetic mice with the inhibition of retinal glial activation.