Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

Effect of Fe-Zn alloy layer on the corrosion resistance of galvanized steel in chloride containing environments

In this study, the effect of Fe-Zn alloy layer that is formed during galvanizing process on the corrosion behavior of galvanized steel has been investigated. The galvanostatic dissolution of galvanized steel was carried out in 0.5 M NaCl solution to obtain the Fe-Zn alloy layer on the base steel. The alloy layer was characterized to be composed of FeZn₁₃, FeZn₇ and Fe₃Zn₁₀ intermetallic phases, which constitute the zeta, delta1 and gamma layers of galvanized steel, respectively. It was observed that the alloy layer has similar cathodic polarization behavior but different anodic polarization behavior compared to galvanized steel. The anodic current plateau of alloy layer was up to 100 times lower than that of galvanized coating. Corrosion test performed in wet-dry cyclic condition has shown that the alloy layer has lower corrosion rate as compared to galvanized steel. From the results of corrosion test of alloy layer and base steel, it was concluded that Zn²⁺ has positive effect on the protectiveness of the zinc corrosion products. The measurement of surface potential over the alloy/steel galvanic couple has confirmed the galvanic ability of alloy layer to protect both the alloy layer itself and the base iron during initial stage of atmospheric corrosion.     

Log-polar height maps for multiple range image registration

We propose a method for coarse registration of multiple range images that uses a log-polar height map (LPHM) as the key for establishing correspondence. The LPHM is a local height map orthogonally mapped on the tangent plane with the log-polar coordinate system. The input range images are roughly represented by signed distance field (SDF) samples. For each SDF sample, an LPHM is generated and is converted to an invariant feature vector. Point correspondence is established by a nearest neighbor search in feature space. The RANSAC algorithm is applied on the corresponding point pairs between each pair of range images, and the pairwise registration of input range images is determined by the extracted inlier point pairs. Finally, the global registration is determined by constructing a view tree, which is the spanning tree that maximizes the total number of inlier point pairs. The result of coarse registration is used as the initial state of the fine registration and modeling. The proposed method was tested on multiple real range image datasets.     

Homo- and copolymerizations of 3-(N-carbazolyl)-1-propyne and its homologues by Mo and W catalysts

Summary 3-(N-Carbazolyl)-1-propyne polymerized with MoCl₅- and WCl₆-based catalysts to produce a polymer in high yields. The MoCl₅ and MoCl₅-n-Bu₄Sn catalysts were the most effective (the systems solidified immediately after initiation of polymerization with these catalysts). The product polymer was a yellow solid insoluble in any solvent. Copolymerization of the present monomer with tert-butylacetylene by MoCl₅-n-Bu₄Sn produced a copolymer; it had a high molecular weight (M _w 350,000), completely dissolved in toluene, CHCl₃ etc, and formed a free-standing film by solution casting. -N-Carbazolyl-1-hexyne and-1-octyne produced toluene-insoluble polymers with WCl₆-Ph₄Sn.     

Accurate measurement of ruthenium isotopes by negative thermal ionization mass spectrometry

The method for measurement of ruthenium isotopic composition as RuO(3)(-) by negative thermal ionization mass spectrometry (NTI-MS) is shown to be sensitive and accurate. Precise measurement of the (18)O/(16)O ratio, which is important for oxygen correction in NTI-MS, has also been made. Both Re and Pt filaments were tested, and the latter was proved to be more efficient for negative ion production. The mechanism of ion production with the addition of HI as a reducing reagent and Ba(NO(3))(2) as an ionizing enhancer was also studied. Sensitivity was found to be about 100 times higher than that of the positive mode. Factors related to negative ion formation are discussed, and parameters are optimized. The ionization efficiency has been improved to 0.7%. Ten nanograms of Ru yielded a total ion current of 3 × 10(-12) A for 1 h. The precisions of all Ru isotope ratios with a 100 ng sample size were better than 0.009%.     

Auditory system plasticity in children after long periods of complete deafness

Separation and identification of proteins by two-dimensional (2-D) electrophoresis can be used for protein-based gene expression analysis. In this report single protein spots, from polyvinylidene difluoride blots of micropreparative E. coli 2-D gels, were rapidly and economically identified by matching their amino acid composition, estimated pI and molecular weight against all E. coli entries in the SWISS-PROT database. Thirty proteins from an E. coli 2-D map were analyzed and identities assigned. Three of the proteins were unknown. By protein sequencing analysis, 20 of the 27 proteins were correctly identified. Importantly, correct identifications showed unambiguous "correct" score patterns. While incorrect protein identifications also showed distinctive score patterns, indicating that protein must be identified by other means. These techniques allow large-scale screening of the protein complement of simple organisms, or tissues in normal and disease states. The computer program described here is accessible via the World Wide Web at URL address (http:@expasy.hcuge.ch/).     

Simultaneous rate-synchrony codes in populations of spiking neurons

Firing rates and synchronous firing are often simultaneously relevant signals, and they independently or cooperatively represent external sensory inputs, cognitive events, and environmental situations such as body position. However, how rates and synchrony comodulate and which aspects of inputs are effectively encoded, particularly in the presence of dynamical inputs, are unanswered questions. We examine theoretically how mixed information in dynamic mean input and noise input is represented by dynamic population firing rates and synchrony. In a subthreshold regime, amplitudes of spatially uncorrelated noise are encoded up to a fairly high input frequency, but this requires both rate and synchrony output channels. In a suprathreshold regime, means and common noise amplitudes can be simultaneously and separately encoded by rates and synchrony, respectively, but the input frequency for which this is possible has a lower limit.     

Degree of radiance and polarization of the upwelling radiation from an atmosphere-ocean system

The radiance and degree of linear polarization of the upward radiation emerging from the top of the terrestrial atmosphere bounded by a ruffled ocean surface are computed in the wavelength region ranging from 0.40 to 0.80 microm with the aid of the adding method. The ruffled ocean surface is treated as an interacting interface, where the radiation transmitted diffusely from below the ocean surface into the atmosphere is also taken into account. Computational results show that the simultaneous measurement of radiance and polarization degree from space makes it possible to derive atmospheric and oceanic parameters.     

Fatigue striation in a wide range of crack propagation rates up to 70 μm/cycle in a ductile structural steel

The relationship between striation spacing and fatigue crack propagation rate up to 70 m/cycle was investigated for a ductile structural steel, qualified as JIS SM58Q. A modified compact-type specimen 400 mm wide and a centre-cracked specimen 200 mm wide were tested at a stress ratio, R, of 0 and 0.8. The fracture surface of the specimen was examined in detail under a scanning electron microscope. The crack propagation rate was expressed by a power function of the range of stress intensity factor from 0.1 to 70 m/cycle for R=0 and to 0.5 m/cycle for R=0.8. The striation spacing coincided with the fatigue crack propagation rate over the range 0.1 to 70 m/cycle. The profile of striation was found to be a ridge and valley type, and the ridges on one fracture surface coincided with those on the matching surface. It is suggested that the striation is formed by a plastic blunting mechanism.