Estimation of compound classes in coal hydrogenation liquids by thin-layer chromatography

Compound classes in coal liquids were investigated by thin-layer chromatography coupled with a flame ionization detector (t.l.c.-f.i.d.). Individual t.l.c. peaks for coal liquids were identified as paraffins, aromatics, polar compounds and more strongly polar compounds or asphaltenes in order of increasing R_f values by comparison with specific compounds separated previously by conventional liquid chromatography. Concentrations of compound classes for a series of samples obtained by varying the hydrogenation time were estimated and good agreement was found with the results obtained by the USBM-API 60 liquid chromatography procedure. By using the t.l.c.-f.i.d. method, the relation of distribution of compound classes to the reaction conditions of coal hydrogenation could be derived quantitatively with relative ease.     

Study of carbonaceous mesophase through the e.s.r. spectra of vanadyl chelates

The behaviour of vanadyl chelate complexes in Iranian heavy oil and ethylene tar pitch during the carbonization process has been investigated by the e.s.r. technique to obtain information on the mesophase transformation. Activation energies for rotation of chelates incorporated with aromatic lamellae, and ordering parameters, are estimated from correlation times and intensities of e.s.r. spectra. The molecular plane of the chelates incorporated into the mesophase was found to be oriented parallel to the applied field. The value of activation energy is higher for a mesophase of small size than for a larger one.     

Synthesis of Nanohole‐Structured Single‐Crystalline Platinum Nanosheets Using Surfactant‐Liquid‐Crystals and their Electrochemical Characterization

Nanohole‐structured single‐crystalline Pt nanosheets have been synthesized by the borohydride reduction of Na₂PtCl₆ confined to the lyotropic liquid crystals (LLCs) of polyoxyethylene (20) sorbitan monooleate (Tween 80) with or without nonaethylene‐glycol (C₁₂EO₉). The Pt nanosheets of around 4–10 nm in central thickness and up to 500 nm or above in diameter have a number of hexagonal‐shaped nanoholes ∼1.8 nm wide. High‐resolution electron microscope images of the nanosheets showed atomic fringes with a spacing of 0.22 nm indicating that the nanosheets are crystallographically continuous through the nanoholed and non‐holed areas. The inner‐angle distributions for the hexagonal nanoholes indicate that the six sides of the nanoholes are walled with each two Pt (111), Pt (1 1) and Pt (010) planes. The formation mechanism of nanoholed Pt nanosheets is discussed on the basis of structural and compositional data for the resulting solids and their precursory LLCs, with the aid of similar nanohole growth observed for a Tween 80 free but oleic acid‐incorporated system. It is also demonstrated that the nanoholed Pt nanostructures loaded on carbon exhibit fairly high electrocatalytic activity for oxygen reduction reaction and a high performance as a cathode material for polymer‐electrolyte fuel cells, along with their extremely high thermostability revealed through the effect of electron‐irradiation.     

Analysis of a coal-derived liquid using highpressure liquid chromatography and synchronous fluorescence spectrometry

Synchronous fluorescence spectra of model polycondensed aromatic hydrocarbon molecules were recorded and used to identify the number of condensed rings in the aromatic molecules. A coal-derived liquid from Yubarishinko coal was initially separated into fractions having different number of condensed aromatic rings, and each fraction was further divided into narrow fractions having different numbers of carbon atoms. These fractions were studied using synchronous fluorescence spectroscopy. Results indicate the potential usefulness of synchronous fluorescence spectroscopy as a method of analysis of complex mixtures as coal-derived liquids despite the limitation of the method that some molecules give only weak peaks. Several components in some fractions were identified by a combination of synchronous fluorescence spectra and conventional excitation and emission fluorescence spectra.     

Segmented chirped grating for coarse wavelength division demultiplexing with multimode optical fibers

A chirped grating segmented into partitions each having a constant blaze angle to use in a demultiplexer for coarse wavelength division multiplexing with multimode optical fibers is developed. Its designed configuration utilizes a resonance region to achieve high diffraction efficiency and large dispersion. The width, blaze angle, and diffraction order of each partition were optimized by vector diffraction analysis. The diffraction loss of the manufactured grating was less than 1.5 dB, and polarization-dependent loss was less than 0.6 dB within a wavelength width of at least 70 nm. It is confirmed that a demultiplexer with the developed chirped grating had a wide passband and low cross talk.     

Heavy metal leaching from aerobic and anaerobic landfill bioreactors of co-disposed municipal solid waste incineration bottom ash and shredded low-organic residues

In this study, heavy metal leaching from aerobic and anaerobic landfill bioreactor test cells for co-disposed municipal solid waste incineration (MSWI) bottom ash and shredded low-organic residues has been investigated. Test cells were operated for 1 year. Heavy metals which were comparatively higher in leachate of aerobic cell were copper (Cu), lead (Pb), boron (B), zinc (Zn), manganese (Mn) and iron (Fe), and those apparently lower were aluminum (Al), arsenic (As), molybdenum (Mo), and vanadium (V). However, no significant release of heavy metals under aerobic conditions was observed compared to anaerobic and control cells. Furthermore, there was no meaningful correlation between oxidation-reduction potential (ORP) and heavy metal concentrations in the leachates although some researchers speculate that aeration may result in excessive heavy metal leaching. No meaningful correlation between dissolved organic carbon (DOC) and leaching of Cu and Pb was another interesting observation. The only heavy metal that exceeded the state discharge limits (10mg/l, to be enforced after April 2005) in the aerobic cell leachate samples was boron and there was no correlation between boron leaching and ORP. Higher B levels in aerobic cell should be due to comparatively lower pH values in this cell. However, it is anticipated that this slightly increased concentrations of B (maximum 25mg/l) will not create a risk for bioreactor operation; rather it should be beneficial for long-term stability of the landfill through faster washout. It was concluded that aerobization of landfills of heavy metal rich MSWI bottom ash and shredded residues is possible with no dramatic increase in heavy metals in the leachate.     

Effects of insufficient air injection on methanogenic Archaea in landfill bioreactor

In this study, methanogenic Archaea diversity in an aerated landfill bioreactor filled with co-disposed incineration bottom ashes and shredded incombustible wastes was monitored and analyzed as a function of time using molecular techniques. Besides, the effects of insufficient air injection on the bioreactor performance and methanogenic diversity were evaluated thoroughly. Results indicated that rapid bio-stabilization of solid waste are possible with aerated landfill bioreactor at various oxygen and oxidation reduction potential levels. Slot-blot hybridization results of leachate samples collected from aerated landfill bioreactor showed that archaeal and bacterial activities increased as stabilization accelerated and bacterial populations constituted almost 95% of all microorganisms. The results of slot-blot hybridization and phylogenetic analysis based on 16S rRNA gene revealed that Methanobacteriales and Methanomicrobiales were dominant species at the beginning while substituted by Methanosarcina-related methanogens close to the end of the operation of bioreactor.     

Large eddy simulation of swirling jet in a bluff-body burner

The large eddy simulation (LES) is applied to an unconfined swirling flow of an air surrounding a bluff-body having a central jet of air, and the complicated flowfield that involves the recirculation and vortex breakdown is investigated. The Smagorinsky model is used as the sub-grid scale model. The results of the present numerical simulation are compared with the experimental data of the mean and stochastic root mean square (RMS) variations of two velocity components. Although the inflow conditions are specified in a simple manner, the obtained numerical results are in reasonable agreement with the experiments, except for a part of RMS variation values near downstream of the bluff body. The present numerical calculations can successfully reproduce the two characteristics of the flow, i.e., an upstream recirculation zone established just downstream of the burner plane and the additional recirculation zone established at the more downstream location.     

Aberration properties in a chirped grating for coarse wavelength division demultiplexing

We studied the imaging performance of a chirped grating for a demultiplexer designed for coarse wavelength division multiplexing using a wavefront aberration analysis and the ray tracing simulation. The demultiplexer was composed of a chirped grating, cylindrical lenses, and a waveguide. The best image point and the spot shape focused by the chirped grating were effectively calculated with the wavefront aberration. We applied the aberration analysis to design a waveguide to connect branched beams to photodetectors, and we confirmed the demultiplexing performance experimentally.