Comparison of the effects of nonlinear gain and weak opticalfeedback on the dynamics of semiconductor lasers

The influence of nonlinear gain and optical feedback on the dynamics of single-mode semiconductor lasers are numerically investigated based on the Lang and Kobayashi model. It is well known that the nonlinear gain tends to stabilize the dynamics, while the optical feedback tends to increase the instabilities. In this paper, we study the behavior of the attractors when the feedback level k and the gain saturation coefficient ε vary and show that the effects of these parameters are surprisingly opposite. For example, we find that the route to chaos that the external cavity modes follow for increasing k is reversed for increasing ε in an almost identical manner. When the feedback increases the modes follow the usual quasi-periodic route and turn into torus. If k continues to increase, the torus become chaotic attractors as the result of several period-doubling bifurcations or a third Hopf bifurcation. Further increase of k causes the chaotic attractors to lose stability, Contrarily, if the value of the parameter ε is increased, the attractors recover their stability and reverse the route becoming simple torus again. If ε is increased further, the torus reverse the quasi-periodic route and turn into stable modes again. We also find that on the contrary to k, the parameter ε enhances the stability region of an attractor. We show that the feedback level above which a limit cycle emerges from a stable mode, the feedback level above which a torus emerges from a limit cycle, and the feedback level above which a chaotic attractor loses stability are all increasing functions of ε     

Effect of rotor profiles on the torque of a switched-reluctancemotor

The authors examine effects on the torque that simple variations of the standard rotor pole face profile could have, basically from an elementary viewpoint of how the modified profiles affect the distribution and magnitude of the radial and tangential components of the flux density. It is observed that the average torque is mostly affected by changes that alter the dominant radial component, such as changes in the effective air gap length. The other observation that an increase in the average torque can also be obtained by a favorable shift in the torque versus angle characteristics by relatively simple changes of the rotor pole profile is not so well known. Such a shift that reduces the slope of the torque angle characteristic, skewing the curve towards the unaligned position, has two advantages: one is that the phase inductance is at its maximum positive slop and, hence, the maximum torque, when the phase is energized; second, the flatter inductance profile near the aligned position when the phase current is to be commutated would allow a faster drop off of the commutated current and, thus, a smaller negative torque     

Influence of aminophylline and 8-(p-sulfophenyl)theophylline on the anticonvulsive action of diphenylhydantoin, phenobarbital, and valproate against maximal electroshock-induced convulsions in mice

Time variation of drinking is substantial and has an effect on aggregate estimates of consumption. In this article it is shown that because of a considerable seasonal variation in consumption (+/- 20%) a serious bias in annual consumption estimates can be expected in surveys with a limited time frame. The present study analyzes drinking data collected in the general population of the Netherlands from March 1985 through December 1985 (including Christmas and New Year's Eve). Since it was expected that sensitivity to temporal fluctuations might not be equal for different methods of measurement, several indices of consumption were compared. Although the assessed seasonal effect varies indeed across types of measurement, across male and female subsample and across types of alcoholic beverage, the general tendency is for consumption to be highest in the spring season and lowest in the autumn. Sales figures fluctuate accordingly. It is evident that the risk of biased estimates is larger the shorter the time frame of the survey. Seasonal variation was highest in the frequency domain. Furthermore, exclusion from the time frame of collective holidays, during which people drink more often and more per occasion (viz., Christmas), increases the risk of biased estimates. Even estimates of abstention, but also regular heavy drinking among women, appear to vary considerably over the three seasons in this study. The main conclusion is that results of comparisons of survey data on drinking, particularly those over time, are more or less invalid if the respective time frames of the surveys do not correspond.     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Central sleep apnea

A central sleep apnea is the absence of respiratory effect, and, thus, the absence of airflow during sleep. Central hypopnea, a related disorder, is also discussed. The sensory component of central sleep apnea; defects involving the integrative and executive neurons; non-neurologic causes of central sleep apneas, including chronic obstructive pulmonary disease and congestive heart failure; diagnosis; treatment; and other topics are reviewed in detail.     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.