Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

改性膨润土对甲基橙的吸附

在用Cu^2 A‘^3 Fe^3 对膨润土改性中，Fe^3 改性的膨润土对甲基橙的吸附性能最好，在振荡20分钟后即可达到吸附平衡。pH=3～7、用量为3g／L、25℃时对甲基橙的吸附量达到最大，在pH=7及常温条件下，铁基膨润土的用量为11g／L时，对浓度为250mg／L甲基橙的吸附量和去除率分别为22.2mg／g98．6％；对浓度为40mg／L的甲基橙去除率达97.1％。     

Image Mosaic Techniques OptimizationUsing Wavelet

This essay concentrates on two key procedures of image mosaic--image registration and imagefusion.Becauseof the character of geometric transformation invariance of edge points, wecalculate the angle difference of the direction vector ofedge points in different images anddraw an angle difference histogramto adjust the rotationproblem. Through this way, algorithm based on gray information is expandedandcan be used in images withdisplacementand rotation. Inthe term of image fusion, wavelet multi-scale analysis is used to fuse spliced images. In order to choose the best method of imagefusion,weevaluate the results of different methods of image fusion by cross entropy.     

广西产迷迭香挥发油化学成分的分析

水蒸气蒸馏法提取广西百色地区迷迭香茎、叶中的挥发油,利用GC-MS联用仪进行了分析。共分离出36个峰,鉴定了其中31个化学成分,占总含量的97.08%。其主要成分为1,8-桉叶素、α-蒎烯、樟脑、莰烯、α-松油醇、乙酸龙脑酯及龙脑等。     

心理资本前因变量研究

采用心理资本问卷对分别属于医药、建筑、水利工程、电信、通讯运营和服务行业的6家企业的员工进行了调查.根据对回收的283份有效问卷的统计分析,认为员工的性别、受教育程度和所在企业的性质对员工心理资本不会产生显著性影响,而员工年龄的影响显著,50岁以上员工的总体心理资本水平高于其他年龄段员工.     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.     

工业纯铝在模拟海水中的电化学腐蚀行为

为研究铝在海水中的腐蚀过程,采用电化学阻抗谱、浸泡试验、扫描电子显微镜研究工业纯铝在模拟海水中的腐蚀行为.结果表明:铝在模拟海水中发生点蚀的区域为富含Fe的晶间化合物处,点蚀半径随时间的增加而扩大.铝在模拟海水中的溶解曲线分为4个区间:活性溶解区、过渡区、过钝化区、钝化区.铝在模拟海水中,极化电位为过钝化区时,转移电阻R t随着电位的升高而变小,铝发生严重的点蚀;而极化电位为钝化区时,铝的转移电阻R t随着电位的升高基本不变,铝的溶解行为受到抑制.工业纯铝在模拟海水中发生点蚀的电位区间是-0.45～-0.65 V,钝化电位区间为-0.75～-0.85 V.     

Fabrication and characterization of nano silver powder prepared by spray pyrolysis

Silver powder was fabricated by spray pyrolysis, using 2%–20% AgNO₃ solution, 336–500 mL/h flux of AgNO₃ solution, 0.28–0.32 MPa flux of carrier gas and in the 620–820 °C temperature range. The effects of furnace set temperature, concentration of AgNO₃ aqueous solution, flux of AgNO₃ aqueous solution as well as carrier gas on the morphology and particle size distribution of silver powder, were investigated. The experimental results showed that with the high concentration of AgNO₃ aqueous solution, the average grain size of silver decreased with the increasing of furnace set temperature. But the gain size distribution was not homogenous, the discontinuous grain growth occurred. With the low concentration of AgNO₃ aqueous solution, the higher furnace set temperature made the nano sliver grains sintered together to grow. Nano silver powder about 100 nm was fabricated by spray pyrolysis, using 2wt% AgNO₃ solutions, 336 mL/h flux of AgNO₃ aqueous solution, 0.32 MPa flux of carrier gas at 720 °C furnace set temperature.     

确定土壤背景值的Hazen概率法——以铜陵矿区Pb为例

本文选取已知土壤背景含量的铜陵矿区,基于Hazen概率曲线,探讨了土壤污染重金属元素Pb背景含量与污染叠加含量的区分方法.得到Pb元素的背景含量为28.5μg/g,与该区深层土壤样中Pb元素含量的平均值(34μg/g)比较接近.还得到了Pb元素污染叠加含量与背景含量的界线点51μg/g.基于Hazen概率曲线区分铜陵矿区土壤Pb元素背景含量与污染叠加含量的方法是有效的,有必要将该方法推广到土壤中其它重金属污染元素、其它地区作进一步研究.