Taxonomic investigation of selected rust fungi using scanning electron microscopy from Khyber Pakhtunkhwa,Pakistan

Rusts comprises the largest natural group of plant pathogens including approximately 8% of all described Fungi. Rust fungi are extremely plant pathogens responsible for great losses to agriculture productivity. Rust species belong to several genera among which more than half are Puccinia species. In Pakistan, rust causes severe damage to agriculture crops. Current study was carried out to identify and characterize different rust species common in the research area through microscopy and Scanning electron microscopy (SEM) in Khyber Pakhtunkhwa, Pakistan. Morpho-anatomical investigation of each collected rust species was carried out using different standard protocols. The dimensions of spores were measured and snapped under a stereomicroscope. SEM was used to examine the shape, size, and ornamentation of the spores of each rust fungus. Results revealed documentation of seven rust fungi, that is, Melampsora euphorbiae, Phragmidium barclayi, Puccinia nepalensis, P. exhausta, P. menthae, Uromyces capitatus, and Uromyces decorates belong to four different genera, were recorded. SEM revealed that spermogonia and Aecia were missing in most of the rust fungus studied. Uredinia was found in a scattered, irregular, lengthy, and epidermis-enclosed form. Urediniospores were found to be ovulating, elongated, echinulate, globose to sub-globose, ellipsoid to ovoid, and globose to sub-globose. Telia was found as sub-epidermal, amphigenous, dispersed, minute, and spherical cells. Teliospores ranged in form from cylindrical to oblong. The germ pores were detected in both apical (top cell) and basal (bottom cell) idiosyncratic and pedicel-attached cells. The techniques used in the current investigation will aid mycologists in rust identification and microscopic characterization.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Palyno-anatomical characters and their systematic significance in the family Apiaceae from Chitral,eastern Hindu Kush,Pakistan

The present study was performed to provide a detailed explanation of leaf epidermal anatomy and pollen micromorphological features of selected species of family Apiaceae from Chitral, eastern Hindu Kush region as the basis of forthcoming studies. In the present article pollen morphology of eight species and foliar epidermal of seven species of family Apiaceae have been examined through microscopic techniques. In results two types of pollen prolate (five species) and perprolate (three species) with three colpi have been recorded. The exine ornamentation was found to be regulate, striate, and cerebroid. Largest pollen was found in Heracleum leucocarpum with the polar diameter of 43.25 μm and equatorial diameter of 21.6 μm. Smallest pollen was observed in Elaeosticta chitralica with the polar diameter of 18.4 μm. The P/E ratio varied from 1.59 to 2.16. Regarding to foliar epidermal anatomy, three types of epidermal cells including rectangular, irregular, and polygonal with variation in anticlinal wall pattern were determined. In the selected species three kinds of stomata comprising anisocytic, anomocytic, and paracytic type were reported in the current research. The size of epidermal cells ranged from 106 × 42.50 μm in Bupleurum falcatum subsp. cernuum and 77.25 × 26.35 μm in Prangos pabularia in adaxial surface. Largest stomatal complex was found in Prangos pabularia both in adaxial 33.55 × 20.05 μm and abaxial 50.25 × 39.40 μm. All the observed quantitative and qualitative features of the species were proved to be useful in the delimitation of species at generic and species level.     

Correlation between in vitro and in vivo parameters of commercial paracetamol tablets

Three leading and competitive commercial products of paracetamol tablets coded as brands A, B and C (A, being the innovator product) in the country were evaluated for their in vitro properties and in vivo comparative bioavailability. The studies included chemical equivalence, hardness, disintegration time, dissolution rate and systemic availability among eight healthy volunteers. The disintegration times were 2.1 min for brand A, 5.7 min for brand B and 36.2 min for brand C. The dissolution rate (T70) were 33.0 min, 74.5 min and 56.5 min for brands A, B and C, respectively. While brand A passed all the in vitro tests as specified in the official monograph, brand B failed only the dissolution rate test and brand C failed both the disintegration and dissolution tests. These significant differences observed among the products after in vitro tests were not reflected in the in vivo availability. While the absorption rate (indicated by tmax) of brand C was significantly faster (i.e. shorter) than those of Brands A and B, the extent of absorption (indicated by AUC) was comparable among the three brands. The relative bioavailabilities (with respect to brand A) were 92 and 91% for brands B and C, respectively indicating that the products were bioequivalent. Comparison of the in vitro and in vivo data suggest that the systemic absorption of paracetamol may not be dissolution--rate limited and that using in vitro dissolution rate studies alone to establish bioequivalency of paracetamol tablets should be done with caution.     

Efflux pump-mediated quinolone resistance in Staphylococcus aureus strains wild type for gyrA, gyrB, grlA, and norA

Fluoroquinolone efflux was studied in 47 Staphylococcus aureus clinical strains with MICs of ciprofloxacin (CFX) of < or = 2 micrograms/ml. Forty-three strains were wild type for gyrA, gyrB, and grlA quinolone resistance-determining regions and for norA and its promoter region. Forty of these strains (MICs of CFX, 0.1 to 0.2 microgram/ml) did not show efflux of fluoroquinolones. Three strains (MICs of CFX, 1 to 2 micrograms/ml) showed efflux. These results suggest that efflux can appear in S. aureus clinical strains in the absence of mutations in norA and its promoter.     

Lidocaine-loaded biodegradable nanospheres. I. Optimization Of the drug incorporation into the polymer matrix

Spherical nanoparticulate drug carriers made of poly(d,l-lactic acid) with controlled size were designed. A local anesthetic, lidocaine, a small hydrophobic molecule, was incorporated in the core with loadings varying from about 7 to 32% (w/w) and increasing with the particle size. Particles with sizes from about 250 to 820 nm and low polydispersity were prepared with good reproducibility; the polymer concentration (at constant surfactant concentration) governed the particle size. The large particles with a high loading ( approximately 30%) showed under in vitro conditions a slow release over 24-30 h, the medium sized carriers (loading of approximately 13%) released the drug over about 15 h, whereas the small particles with small loading ( approximately 7%) exhibited a rapid release over a couple of hours. It seems that the drug release rate is related to the state (crystallized or dispersed) of the drug incorporated in the polymer matrix.     

Tool selection in three-axis rough machining

An approach to tool selection and sequencing is presented for three-axis rough machining. The trade-off in the selection of tools is as follows: larger tools have reduced access while smaller tools are capable of reduced cutting speed. Furthermore, every tool change incurs a time penalty. The objective of this paper is to select a tool sequence that minimizes the total rough-machining time. In our approach, the removal volume is stratified into 2.5D machining slabs and, for each tool, the area accessible in each slab is computed incrementally, keeping in mind the cutting portion of the tool and the shape of the tool holder and spindle assembly. This reduces the three-axis problem to a series of two-axis problems with complex precedence constraints. Two models are presented to understand this new form of the problem. First, an integer linear programming formulation is discussed to show the complexity of the task. Second, a network flow formulation is presented, by which we show that it is possible to obtain efficiently an approximate solution of the problem. Examples are discussed to illustrate the algorithms discussed.     

The Advanced Glaucoma Intervention Study (AGIS): 5. Encapsulated bleb after initial trabeculectomy

PURPOSE: To compare the incidence of encapsulated bleb after trabeculectomy in eyes with and without previous argon laser trabeculoplasty and to assess other risk factors for encapsulated bleb development. METHODS: After medical treatment failure, eyes enrolled in the Advanced Glaucoma Intervention Study (AGIS) were randomly assigned to sequences of interventions starting with either argon laser trabeculoplasty or trabeculectomy. In the present study we compared the clinical course for 1 year after trabeculectomy in 119 eyes with failed argon laser trabeculoplasty with that of 379 eyes without previous argon laser trabeculoplasty. Data on bleb encapsulation were collected at the time that the encapsulation was diagnosed, and 3 and 6 months later. RESULTS: Of multiple factors examined in the AGIS data for the risk of developing encapsulated bleb, only male gender and high school graduation without further formal education were statistically significant. Encapsulation occurred in 18.5% of eyes with previous argon laser trabeculoplasty failure and 14.5% of eyes without previous argon laser trabeculoplasty (unadjusted relative risk, 1.27; 95% confidence limits = 0.81, 2.00; P = .23). After adjusting for age, gender, educational achievement, prescribed systemic beta-blockers, diabetes, visual field score, and years since glaucoma diagnosis, this difference remains statistically not significant. Four weeks after trabeculectomy, mean intraocular pressure was 7.5 mm Hg higher in eyes with (22.5 mm Hg) than without (15.0 mm Hg) encapsulated bleb; at 1 year after trabeculectomy and the resumption of medical therapy when needed, this excess was reduced to 1.4 mm Hg. CONCLUSIONS: This study, as did two previous studies, found male gender to be a risk factor for bleb encapsulation. Four studies, including the present study, have reported a higher rate of encapsulation in eyes with previous argon laser trabeculoplasty; in two of the studies, one of which was the present study, the rate was not statistically significantly higher; in the other two studies the rate was significantly higher. The 4-week postoperative mean intraocular pressure was higher in eyes with than without encapsulated bleb; with the resumption of medical treatment the two means converged after 1 year.