Survival of Salmonella Enteritidis PT 30 on inoculated almond kernels in hot water treatments

Almonds are blanched by exposure to hot water or steam-injected water to remove the pellicle (skin) from the kernel. This study evaluated the survival of Salmonella Enteritidis PT 30, Salmonella Senftenberg 775W and Enterococcus faecalis on whole raw almond kernels exposed to hot water. Whole, inoculated (7 to 9 log CFU/g) Nonpareil almonds (40 g) were submerged in 25 L of water maintained at 60, 70, 80 and 88 °C. Almonds were heated for up to 12 min, drained for 2 s, and transferred to 80 mL of cold (4 °C) tryptic soy broth. Almonds in broth were stomached at high speed for 2 min, serially diluted, plated onto tryptic soy and bismuth sulfite agars (Salmonella) or bile esculin agar (Enterococcus) and incubated at 37 °C for 24 and 48 h, respectively. D values of 2.6, 1.2, 0.75 and 0.39 min were calculated for exposure of S. Enteritidis PT 30 to water at 60, 70, 80 and 88 °C, respectively; the calculated z value was 35 C°. D values determined for Salmonella Senftenberg 775W and E. faecalis at 88 °C were 0.37 and 0.36 min, respectively. Neither Salmonella serovar could be recovered by enrichment of 1-g samples after almonds inoculated at 5 log CFU/g were heated at 88 °C for 2 min. These data will be useful to validate almond industry blanching processes.     

Structural and Magnetic Properties of Triethylene Glycol Stabilized Monodisperse Fe3O4 Nanoparticles

In this present study, a facile synthetic route was developed to prepare super-paramagnetic Fe₃O₄ MNPs directly via a one-pot approach. In this synthesis, only one iron containing compound and instead of high-boiling-point solvents, water-soluble tetraethylene glycol (TEG) was used as both the solvent and surfactant to control the particle growth and to prevent the aggregation of particles. Crystallite, particle, and magnetic core size are in good agreement with each other. The VSM measurement shows the superparamagnetic property of the product. The existence of TEG layer on the surface of the Fe₃O₄ nanoparticles was confirmed by Fourier transform infrared spectroscopy and thermal gravimetric analysis. The monodisperse morphology of the product was presented via TEM analysis. Due to the monodisperse morphology, superparamagnetic property, and small particle size, the product may have a potential application in biomedical research field.     

Hyperspectral image coding and transmission scheme based on wavelet transform and distributed source coding

Multimedia Tools and Applications - This paper presents a novel scheme for satellite hyperspectral images broadcasting over wireless channels. First, a simple pre-processing is performed. Then, a...     

Specifying the Optimal Transmission Manner in WSNs: Analysis and Simulation

Wireless Personal Communications - Employing multi-hop transmission (MH) in wireless sensor networks achieves the uniform distribution of energy cost between nodes. However, the minimum energy cost...     

Molecular Characterization of α- and β-Thalassaemia among Malay Patients

Both α- and β-thalassaemia syndromes are public health problems in the multi-ethnic population of Malaysia. To molecularly characterise the α- and β-thalassaemia deletions and mutations among Malays from Penang, Gap-PCR and multiplexed amplification refractory mutation systems were used to study 13 α-thalassaemia determinants and 20 β-thalassaemia mutations in 28 and 40 unrelated Malays, respectively. Four α-thalassaemia deletions and mutations were demonstrated. −−^SEA deletion and α^CSα accounted for more than 70% of the α-thalassaemia alleles. Out of the 20 β-thalassaemia alleles studied, nine different β-thalassaemia mutations were identified of which β^E accounted for more than 40%. We concluded that the highest prevalence of (α- and β-thalassaemia alleles in the Malays from Penang are −−^SEA deletion and β^E mutation, respectively.     

Corrosion Inhibition of Mild Steel in Acidic Medium using 2-amino Thiophenoland 2-Cyanomethyl Benzothiazole

The corrosion inhibition characteristics of 2-amino thiophenol (ATP) and 2-cyanomethyl benzothiazole (CNMBT) on two types of steel in 1m HCl medium were investigated at different temperatures (25, 30, 35, 40 and 50°C). The pitting corrosion behaviour for the same system was studied using a potentiodynamic technique. The pitting corrosion resistance of steel samples increased with increase in concentration of the ATP and CNMBT. Some samples were examined by scanning electron microscopy. The effects of the inhibitors on the general corrosion of the two samples were investigated by using gravimetric and galvanostatic polarization techniques. The inhibition efficiencies increased with increase their concentration but decreased with increase in temperature. Free energies of activation, enthalpies and entropies for the inhibition processes were determined from rate constant data measured and different temperatures at different concentrations of ATP and CNMBT. Results were compared with fits obtained from the application of the Langmuir isotherm. Results were correlated to the chemical structure of the inhibitors. The inhibition efficiency of CNMBT is higher than that of ATP.     

Feasibility of recycled newspaper as cellulose source for regenerated cellulose membrane fabrication

An environmental friendly regenerated cellulose membrane (RCM) was successfully prepared via NaOH/urea aqueous solution system by utilizing recycled newspaper (RNP) as the cellulose source. The morphological and chemical structure of resulting membrane were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD) spectroscopy, and thermogravimetric analysis (TGA). Results from FTIR and XRD verified that the transparent RCM possesses cellulose II structure. SEM observation revealed that the transparent RCM consist of homogeneous dense symmetric membrane structure and composed of a skin layer with mean roughness parameter R_a, obtained from AFM analysis of 29.53 nm. Pure water flux, water content, water contact angle, porosity, and pore size of the resulting membrane were also measured. This study promotes the potential of the cellulose‐based membrane obtained from low cost cellulose source for application in filtration and separation system. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42684.     

Temburong Bridge,Brunei – Design of two cable stayed bridges

The Temburong Bridge Project is a 30 km long dual two‐lane highway crossing over the Brunei Bay. It will connect the relatively isolated Brunei district of Temburong to the other three Brunei districts. The main objective of the project is to stimulate economic growth in the Temburong region by connecting it to the country's airport and ports. The alignment crosses two navigation channels resulting in the need for two cable stayed bridges – the Brunei Channel Bridge (145 m main span) and the Eastern Channel Bridge (260 m main span). The design of these cable stayed bridges is one of the first applications of the Eurocode to a fully concrete cable stayed bridge. Both cable stayed bridges draw on strong Islamic architectural influences from the region to form a tower shape that is unique and instantly recognisable. Temburong Brücke, Brunei – Entwurf von zwei Schrägkabelbrücken Die Temburong Brücke ist eine 30 km lange Verbindung über die Brunei Bucht mit zwei Richtungsfahrbahnen mit je zwei Fahrstreifen. Sie wird den relativ isolierten Distrikt Temburong mit den anderen drei Distrikten Bruneis verbinden. Hauptanliegen des Projekts ist die Stimulierung von ökonomischem Wachstum in der Temburong Region, indem sie an den Flughafen und Seehafen des Landes angebunden wird. Die Trassierung erfordert die Überquerung zweier Schiffahrtsrouten. Dies wird mit der Anordnung zweier Schrägkabelbrücken ermöglicht, der Brunei Channel Brücke (145 m Hauptspannweite) und der Eastern Channel Brücke (260 m Hauptspannweite). Die Bemessung der beiden Brücken stellt eine der ersten Anwendungen des Eurocode auf Schrägkabelbrücken mit Betonüberbau dar. Optisch sind die beiden Brücken geprägt von der islamischen Architektur der Umgebung, die Pylonform ist ein besonderes Erkennungsmerkmal der Brücken.