A study of three techniques used in the diffraction analysis ofshaped dual-reflector antennas

An examination is presented of three techniques used for the efficient computation of fields diffracted by a subreflector that has been shaped by geometrical optics synthesis. It is found that these techniques, which are based on the geometrical theory of diffraction (GTD), produce errors in the computed fields that are specific to shaped reflectors. These errors are examined for a reflector system shaped to produce maximum gain from a tapered feed illumination. The discrepancies are directly related to the caustic being located near an observation point of the GTD calculations. The errors found are localized, and they increase in magnitude as the caustic approaches the main reflector. In a general offset geometry, the location of the caustic may be located arbitrarily close to the main reflector given a prescribed output aperture distribution. For the specific case considered here-the common situation of shaping to produce maximum gain-the caustic is located near the edge of the main reflector and on the reflection shadow boundary. A local correction is derived which creates a uniform solution through the caustic and across the reflection shadow boundary. Away from this point the calculation recedes to the standard GTD solution     

Electromagnetic scattering by a straight thin wire

The traveling-wave energy, which multiply diffracts on a straight thin wire, is represented as a sum of terms, each with a distinct physical meaning, that can be individually examined in the time domain. Expressions for each scattering mechanism on a straight thin wire are cast in the form of four basic electromagnetic wave concepts: diffraction, attachment, launch, and reflection. Using the basic mechanisms from P.Ya. Ufimtsev (1962), each of the scattering mechanisms is included into the total scattered field for the straight thin wire. Scattering as a function of angle and frequency is then compared to the moment-method solution. These analytic expressions are then extended to a lossy wire with a simple approximate modification using the propagation velocity on the wire as derived from the Sommerfeld wave on a straight lossy wire. Both the perfectly conducting and lossy wire solutions are compared to moment-method results, and excellent agreement is found. As is common with asymptotic solutions, when the electrical length of wire is smaller than 0.2 λ the results lose accuracy. The expressions modified to approximate the scattering for the lossy thin wire yield excellent agreement even for lossy wires where the wire radius is on the order of skin depth     

Single- and multiobjective evolutionary optimization assisted by Gaussian random field metamodels

This paper presents and analyzes in detail an efficient search method based on evolutionary algorithms (EA) assisted by local Gaussian random field metamodels (GRFM). It is created for the use in optimization problems with one (or many) computationally expensive evaluation function(s). The role of GRFM is to predict objective function values for new candidate solutions by exploiting information recorded during previous evaluations. Moreover, GRFM are able to provide estimates of the confidence of their predictions. Predictions and their confidence intervals predicted by GRFM are used by the metamodel assisted EA. It selects the promising members in each generation and carries out exact, costly evaluations only for them. The extensive use of the uncertainty information of predictions for screening the candidate solutions makes it possible to significantly reduce the computational cost of singleand multiobjective EA. This is adequately demonstrated in this paper by means of mathematical test cases and a multipoint airfoil design in aerodynamics.     

Examination of chemical irritation and textural influence on food preferences in two age cohorts using complex food systems

The changes to the chemical senses of taste and smell that accompany ageing are widely documented, and there has been some evidence that these changes may influence food preferences of the older consumer. However, little is known about the loss of function of the residual senses of texture and chemical irritant perception and how such losses influence food preferences. A consumer panel comprising a young (20–35 years) and an older (>65 years) age cohort was recruited and sensory tests were conducted to determine perceived intensity, preferences and the possibility of cross modal interaction between the sensory modalities of chemical irritation and texture. Liquid, semi-solid and solid food systems were studied to enable comparisons to be drawn. Older consumers were less capable of discriminating between chemical irritation and texture stimuli, indicating loss of sensory function, but there was indication that higher levels of chemical irritation were preferred among older consumers in some texture types.     

Systematic characterization of Cl2 reactive ion etchingfor improved ohmics in AlGaN/GaN HEMTs

Pre-metal-deposition reactive ion etching (RIE) was performed on an Al_0.3Ga_0.7N/AlN/GaN heterostructure in order to improve the metal-to-semiconductor contact resistance. An optimum AlGaN thickness for minimizing contact resistance was determined. An initial decrease in contact resistance with etching time was explained in terms of removal of an oxide surface layer and/or by an increase in tunnelling current with the decrease of the AlGaN thickness. The presence of a dissimilar surface layer was confirmed by an initial nonuniform etch depth rate. An increase in contact resistance for deeper etches was experienced. The increase was related to depletion of the two-dimensional (2-D) electron gas (2-DEG) under the ohmics. Etch depths were measured by atomic force microscopy (AFM). The contact resistance decreased from about 0.45 Ωmm for unetched ohmics to a minimum of 0.27 Ωmm for 70 Å etched ohmics. The initial thickness of the AlGaN layer was 250 Å. The decrease in contact resistance, without excessive complications on device processing, supports RIE etching as a viable solution to improve ohmic contact resistance in AlGaN/GaN HEMTs     

Reduced and differential parallel interference cancellation forCDMA systems

Since code division multiple access systems in multipath environments suffer from multiple access interference (MAI), multiuser detection schemes should be used in the receivers. Parallel interference cancellation (PIC) is a promising method to combat MAI due to its relatively low computational complexity and good performance. It is shown that the complexity of PIC is still high for realistic scenarios in terms of the symbol rate, the number of users, spreading gain, and multipath components. However, two novel methods are introduced to reduce significantly the complexity without sacrificing performance. The first approach, called reduced PIC, takes advantage of the composition of the interference to concentrate interference cancellation only on significant terms. The second approach, called differential PIC, exploits the multistage character of PIC to avoid unnecessary double calculations of certain terms in consecutive stages. It is shown that a combination of both approaches leads to a performance very close to the single-user bound whereas the complexity can be kept on the order of the conventional RAKE receiver     

High-bandwidth graded-index polymer optical fiber with high-temperature stability

A newly developed graded-index polymer optical fiber (GI-POF) with high-temperature and high-humidity stability was proposed. As it was found that the high numerical aperture and high glass transition temperature (T/sub g/) at the core center of the GI-POF were key issues to achieve both high-temperature and humidity stability, a partially fluorinated polymer material was adopted to obtain both characteristics in the GI-POF. The newly developed GI-POF had low-loss (140 dB/km at 650-nm wavelength), high-bandwidth (higher than 1 GHz for 100 m transmission), high-temperature and humidity stability at 70/spl deg/C, 80% relative humidity (R.H.) and low bending loss.     

Generation of Technology-Independent Retargetable Analog Blocks

This paper introduces a complete methodology for retargeting of analog cells to different sets of specifications. This methodology is technology-independent, thus allowing the migration, from one technology to another, of the circuit under retargeting. Careful integration of the device sizing and layout generation tasks via the incorporation of layout constraints during the sizing process allows to generate fully functional designs in a few minutes. The methodology is illustrated via the retargeting of a fully-differential Miller-compensated two-stage operational amplifier for a new set of specifications and two different technological processes.An erratum to this article can be found at     

Anforderungen an die Stromversorgung aus dem Privatbereich

Ohne Zusammenfassung Kurzfassung eines Vortrags der 40. Fachtagung der ?sterreichischen Gesellschaft für Energietechnik (OGE) im OVE, die am 7. und 8. November 2002 in Wien stattfindet     

Security issues for downloaded code in mobile phones

'Software defined radio' (SDR) is a technology that will appear in future generations of mobile phones, i.e. following the third-generation mobile phone technology that is currently being defined and developed. Early versions of 'pragmatic' SDR will allow the terminal to be reconfigured at any level of its protocol stack. Ultimately, the 'pure' SDR technology will allow a mobile phone or terminal to have its air interface software configured or reconfigured by other software (or software parameters) that have been downloaded to the terminal, e.g. over the air, or from a remote server via the Internet and one's personal computer (PC). A number of security issues arise with downloaded code that implements the air interface functions, and these may not be obvious simply from looking at the way PC software is updated on-line today. This paper starts with an outline of the code that allows a mobile phone to operate over a particular air interface. This sets the baseline for a discussion of the security issues surrounding the change of this code from one that is fixed and downloaded once only, to code that is reconfigurable during the life of a product.