An efficient optimal algorithm for the quantity discount problem in material requirement planning

An optimal algorithm based on branch-and-bound approach is presented in this paper to determine lot sizes for a single item in material requirement planning environments with deterministic time-phased demand and constant ordering cost with zero lead time, where all-units discounts are available from vendors and backlog is not permitted. On the basis of the proven properties of optimal order policy, a tree-search procedure is presented to construct the sequence of optimal orders. Some useful fathom rules have been proven, which make the algorithm very efficient. To compare the performance of this algorithm with the other existing optimal algorithms, an experimental design with various environments has been developed. Experimental results show that the performance of our optimal algorithm is much better than the performance of other existing optimal algorithms. Considering computational time as the performance measure, this algorithm is considered the best among the existing optimal algorithms for real problems with large dimensions (i.e. large number of periods and discount levels).     

Stability domains of the delay and PID coefficients for general time-delay systems

Time delays are encountered in many physical systems, and they usually threaten the stability and performance of closed-loop systems. The problem of determining all stabilising proportional-integral-derivative (PID) controllers for systems with perturbed delays is less investigated in the literature. In this study, the Rekasius substitution is employed to transform the system parameters to a new space. Then, the singular frequency (SF) method is revised for the Rekasius transformed system. A novel technique is presented to compute the ranges of time delay for which stable PID controller exists. This stability range cannot be readily computed from the previous methods. Finally, it is shown that similar to the original SF method, finite numbers of singular frequencies are sufficient to compute the stable regions in the space of time delay and controller coefficients.     

Structural,optical and electrical properties of Cu<Subscript>2</Subscript>Zn<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>SnS<Subscript>4</Subscript> quinternary alloys nanostructures deposited on porous silicon

The Cu₂Zn_1?xCd_xSnS₄ quinternary alloy nanostructures with different Cd contents were grown using spin coating technique on porous silicon (63.93 %) substrate. The structural properties of Cu₂Zn_1?xCd_xSnS₄/PS were investigated by X-ray diffraction and field emission-scanning electron microscope (FE-SEM). The optical properties studied through photoluminescence technique, indicated that the band gap is shifted as Cd content increases from 1.84 eV at x = 0 to 1.76 eV at x = 1. The electrical characterization of the Ag/n-PS/Cu₂Zn_1?xCd_xSnS₄/Ag diode through current to voltage (I–V) characterization shows the highest photo-response of (value if any) at Cu₂Zn_0.4Cd_0.6SnS₄ composition.     

Extracting 3D information on bone remodeling in the proximity of titanium implants in SRμCT image volumes

Bone-implant integration is measured in several ways. Traditionally and routinely, 2D histological sections of samples, containing bone and the biomaterial, are stained and analyzed using a light microscope. Such histological section provides detailed cellular information about the bone regeneration in the proximity of the implant. However, this information reflects the integration in only a very small fraction, a 10 μm thick slice, of the sample. In this study, we show that feature values quantified on 2D sections are highly dependent on the orientation and the placement of the section, suggesting that a 3D analysis of the whole sample is of importance for a more complete judgment of the bone structure in the proximity of the implant. We propose features describing the 3D data by extending the features traditionally used for 2D-analysis. We present a method for extracting these features from 3D image data and we measure them on five 3D SRμCT image volumes.We also simulate cuts through the image volume positioned at all possible section positions. These simulations show that the measurement variations due to the orientation of the section around the center line of the implant are about 30%.     

Agent-based multimedia presentation and adaptation service

In this paper, we aim to provide adaptive multimedia services especially video ones to end-users in an efficient and secure manner. Users moving outside the office should be able to maintain an office-like environment at their current locations. First, the agents within our proposed architecture negotiate the different communication and interaction factors autonomously and dynamically. Moreover, we needed to develop a user agent in addition to service and system agents that could negotiate the requirements and capabilities at run time to furnish best possible service results. Thus we designed and integrated a video indexing and key framing service within our overall agent-based architecture. We integrated this video indexing and content-based analysis service to adapt the video content according to run time conditions. We designed a video XML schema to validate the media content out of this multimedia service according to specific requirements and features, as we will describe later.

Behavior of Composite Unreinforced Masonry–Fiber-Reinforced Polymer Wall Assemblages Under In-Plane Loading

An experimental investigation was conducted to study the in-plane behavior of face shell mortar bedded unreinforced masonry (URM) wall assemblages retrofitted with fiber-reinforced polymer (FRP) laminates. Forty-two URM assemblages were tested under different stress conditions present in masonry shear and infill walls. Tests included prisms loaded in compression with different bed joint orientation (on/off-axis compression), diagonal tension specimens, and specimens loaded under joint shear. The behavior of each specimen type is discussed with emphasis on modes of failure, strength and deformation characteristics. Results showed that the application of FRP laminates on URM has a great influence on strength, postpeak behavior, as well as altering failure modes and maintaining the specimen integrity. The retrofitted specimens reached compressive strength of 1.62–5.64 times that of their unretrofitted counterparts, depending on the bed joint orientation, and joint shear strength increased by eightfold.     

Scheduling two-stage hybrid flow shop with availability constraints

Most of the literature on scheduling assumes that machines are always available. However, in real life industry, machines may be subject to some unavailability periods due to maintenance activities such as breakdowns (stochastic case) and preventive maintenance (deterministic case). In this paper we investigate the two-stage hybrid flow shop scheduling problem with only one machine on the first stage and m machines on the second stage to minimize the makespan. We consider that each machine is subject to at most one unavailability period. The start time and the end time of each period are known in advance (deterministic case) and only the non-resumable case is studied. First we discuss the complexity of the problem. Afterwards, we give the Branch and Bound model for this problem. Last, we calculate the worst-case performances of three heuristics: LIST algorithm, LPT algorithm and H-heuristic.     

Design, manufacture and evaluation of a new and simple mechanism for transmission of power between intersecting shafts up to 135 degrees (Persian Joint)

This paper introduces a new mechanism which is designed for the transmission of power between two intersecting shafts. The mechanism consists of one drive shaft and one driven shaft, six guide arms, and three connecting arms. The intersecting angle between the input shaft and the output shaft can be varied up to 135° while the velocity ratio between the two shafts remains constant. The research also includes a kinematic analysis and a simulation using Visual NASTRAN, Autodesk Inventor Dynamic and COSMOS Motion. The softwares showed that this mechanism can transmit constant velocity ratios at all angles between two shafts. By comparing the graphs of analytical analysis and simulation analysis, validity of equations was proved. Finally, by fabrication and evaluation of the mechanism it was shown that this mechanism can transmit constant velocity practically.     

断面高宽比对轮胎性能的影响

在赛车运动开始后不久,工程人员就意识到提高汽车转弯速度的方法之一是使汽车与路面产生更大的摩擦力.在早期进行的获取汽车与路面之间更大摩擦力的众多尝试中,较有趣的一种是采用双后轮行驶.然而,最有代表性的解决办法是采用胎面更宽,即断面宽度更大的轮胎.