Regeneration of the node of Ranvier: a light and electron microscope study

Regeneration of the node of Ranvier was investigated in the rat peroneal nerve 10-60 days after nerve crush, by light and electron microscopy. At 10 and 20 days after crush nodes of Ranvier were clearly identifiable by electron microscopy but had a relatively simple structure. At 40 days after crush however nodes were highly differentiated showing specialised features such as paranodal bulbs, nodal constriction of the axon, paranodal Schwann cell mitochondria, nodal Schwann cell microvilli, and nodal gap substance. By light microscopy some nodes were identifiable as early as 20 days after crush. At both 30 and 60 days after crush regenerated internodes were uniformly short (means of 275 micronm and 339 micronm respectively).     

The purine nucleotide cycle. Studies of ammonia production by skeletal muscle in situ and in perfused preparations

Ammonia production by hind limbs of rat was studied in perfused preparations during rest, exercise, and hypoxia, and while the perfusate contained epinephrine or cyanide. Ammonia production by hind limbs was also studied in situ during rest and exercise. Strong correlations were observed between ammonia, IMP, and lactate formation. Adenylosuccinate was not present in detectable amounts in resting muscle (less than 1 nmol/g dry weight) but it appeared and rose sharply in exercising muscle, and then declined during recovery. The maximum found was about 18 nmol/g dry weight. When IMP accumulation exceeded 2.8 mumol/g dry weight, the formation of adenylosuccinate diminished, presumably because of an inhibition of adenylosuccinate synthetase by excess substrate. Exercise resulted in a greatly increased output of ammonia and a decreased output of alanine and glutamine. The tissue contents of aspartate and glutamate were decreased, while that of alanine was increased. The content of malate increased 3-fold during exercise. Epinephrine, hypoxia, and cyanide each caused an increased output of ammonia at the expense of the amino acid content of the tissue. These results provide evidence for the operation of the purine nucleotide cycle in skeletal muscle under various conditions that are associated with an increased rate of glycolysis.     

Effect of periodic background loss on grating spectra

The effect of periodic loss on the performance of refractive-index gratings has been studied in detail. It is shown that the loss periodicity and relative phase strongly affects the symmetry of the reflection, transmission, and loss spectra. This asymmetry is explained successfully through consideration of the overlap between the standing-wave intensity distribution and the periodic loss pattern.     

Behavioral-Level Performance and Power Exploration of Data-Intensive Applications Mapped on Programmable Processors

The continuous increase of the computational power of programmable processors has established them as an attractive design alternative, for implementation of the most computationally intensive applications, like video compression. To enforce this trend, designers implementing applications on programmable platforms have to be provided with reliable and in-depth data and instruction analysis that will allow for the early selection of the most appropriate application for a given set of specifications. To address this need, we introduce a new methodology for early and accurate estimation of the number of instructions required for the execution of an application, together with the number of data memory transfers on a programmable processor. The high-level estimation is achieved by a series of mathematical formulas; these describe not only the arithmetic operations of an application, but also its control and addressing operations, if it is executed on a programmable core. The comparative study, which is done using three popular processors (ARM, MIPS, and Pentium), shows the high efficiency and accuracy of the methodology proposed, in terms of the number of executed (micro-)instructions (i.e. performance) and the number of data memory transfers (i.e. memory power consumption). Using the proposed methodology we estimated an average deviation of 23% in our estimated figures compared with the measurements taken from the real execution on the CPUs. This work was supported by the project PENED ’99 ED501 funded by GSRT of the Greek Ministry of Development, and the project PRENED ’99 KE 874 funded by the Research Committee of the Democritus University of Thrace. This work was partially sponsored by a scholarship from the Public Benefit Foundation of Alexander S. Onassis (Minas Dasygenis). Nikolaos Kroupis was born in Trikala in 1976. He receiver the engineering degree and Ms.C. degree in Department of Electrical and Computer Engineering from Democritous University of Thrace, Greece, in 2000 and 2002, respectively. Since 2002 he has been a Ph.D. student at the Laboratory of Electrical and Electronic Materials Technology. His research interests are in software/hardware co-design of embedded system for signal processing applications. Nikos D. Zervas received a Diploma in Electrical & Computer Engineering from University of Patras, Greece in 1997. He received the Ph.D. degree in the Department of Electrical and Computer Engineering of the same University in 2004. His research interests are in the area of high-level, power optimization techniques and methodologies for multimedia and telecommunication applications. He has received an award from IEEE Computer Society in the context of Low-Power Design Contest of 2000 IEEE Computer Elements Mesa Workshop. Mr. Zervas is a member of the IEEE, ACM and of the Technical Chamber of Greece. Minas Dasygenis was born in Thessaloniki in 1976. He received his Diploma in Electrical and Computer Engineering in 1999, from the Democritus University of Thrace, Greece, and for his diploma Thesis he was honored by The Technical Chamber of Greece and Ericsson Hellas. In 2005, he received his PhD Degree from the Democritus University of Thrace. His research interests include low-power VLSI design of arithmetic circuits, residue number system, embedded architectures, DSPs, hardware/ software codesign and IT security. He has published more than 20 papers in international journals and conferences and he has been a principal researcher in three European research projects. Konstantinos Tatas received his degree in Electrical and Computer Engineering from the Democritus University of Thrace, Greece in 1999. He received his Ph.D. in the VLSI Design and Testing Center in the same University by June 2005. He has been employed as an RTL designer in INTRACOM SA, Greece between 2000 and 2003. His research interests include low-power VLSI design of DSP and multimedia systems, computer arithmetic, IP core design and design for reuse. Antonios Argyriou received the degree in Electrical and Computer engineering from the Democritous University of Thrace, Greece, in 2001, and the M.S. and Ph.D. degrees in Electrical and Computer engineering from the Georgia Institute of Technology, Atlanta, in 2003 and 2005, respectively. His primary research interests include wireless networks, mobile computing and multimedia communications. He is a member of the IEEE and ACM. Dimitrios Soudris received his Diploma in Electrical Engineering from the University of Patras, Greece, in 1987. He received the Ph.D. Degree in Electrical Engineering, from the University of Patras in 1992. He is currently working as Ass. Professor in Dept. of Electrical and Computer Engineering, Democritus University of Thrace, Greece. His research interests include low power design, parallel architectures, embedded systems design, and VLSI signal processing. He has published more than 140 papers in international journals and conferences. He was leader and principal investigator in numerous research projects funded from the Greek Government and Industry as well as the European Commission (ESPRIT II-III-IV and 5th and 6th IST). He has served as General Chair and Program Chair for the International Workshop on Power and Timing Modelling, Optimisation, and Simulation (PATMOS). He received an award from INTEL and IBM for the project results of LPGD #25256 (ESPRIT IV). He is a member of the IEEE, the VLSI Systems and Applications Technical Committee of IEEE CAS and the ACM. Antonios Thanailakis was born in Greece on August 5, 1940. He received B.Sc. degrees in physics and electrical engineering from the University of Thessaloniki, Greece, 1964 and 1968, respectively, and the Msc. and Ph.D. Degrees in electrical engineering and electronics from UMIST, Manchester, U.K. in 1968 and 1971, respectively. He has been a Professor of Microelectronics in Dept. of Electrical and Computer Eng., Democritus Univ. of Thrace, Xanthi, Greece, since 1977. He has been active in electronic device and VLSI system design research since 1968. His current research activities include microelectronic devices and VLSI systems design. He has published a great number of scientific and technical papers, as well as five textbooks. He was leader for carrying out research and development projects funded by Greece, EU, or other organizations on various topics of Microlectronics and VLSI Systems Design (e.g. NATO, ESPRIT, ACTS, STRIDE).     

Ultrastructural changes in articular cartilage in rheumatoid arthritis

Electron microscope studies of the articular cartilages removed in the course of the operation on 6 patients with rheumatoid arthritis were carried out. The processes of destruction of chondrocytes and the cartilaginous matrix in different regions of the articular cartilage were traced. In the surface areas of the drastically changed cartilage there were observed leucocytes of the synovial fluid, and in deeper areas--disintegration of chondrocytes and extracellular disposition of lysosomes and altered organellas, destroyed cartilaginous cells. In these areas destruction of collagenous fibres was particularly intensive. In areas of the tissue remote from the destuction hypertrophy of chondrocytes due to hyperplasia of various organellas and the Golgi complex in particular were noted. In the Golgi zone granules of glycogen were detected. No mitoses were observed. Apparently, the enzymatic destruction of the cartilaginous matrix in rheumatoid arthritis could proceed at the expense of the activazation of the synovial fluid lysosomes and lysosomes of chondrocytes themselves. A reparative regeneration of the disintegrating matrix was realized mainly because of hypertrophy of the functionally preserved chondrocytes.     

Central poststroke pain and Wallenberg''s lateral medullary infarction: frequency, character, and determinants in 63 patients

BACKGROUND: Questionnaire-based surveys from several countries have consistently detected adverse health associated with home dampness and mould growth. METHODS: To test the validity of questions commonly used to indicate the presence of indoor mould, questionnaires were administered in 403 homes where dust samples were taken for viable fungi and air samples for ergosterol. RESULTS: Geometric mean concentrations of the total viable fungi were 255 (SE 116) x 10(3) CFU/g when mouldy odours were reported and 155 (SE 55) when odours were not reported (P = 0.01). Similarly, reported water damage was associated with a 50% increase (P = 0.06). Geometric mean concentrations of the predominantly indoor-source fungi, Aspergillus plus Penicillium, were twice as high when mould or mildew was reported than when not mentioned (P = 0.01). The presence of reported mould or water damage was unrelated to the presence of detectable levels of ergosterol. There was evidence for reporting bias: in the presence of low concentrations of viable fungi in dust, respondents reporting allergies were more likely to report visible mould growth (odds ratio [OR] = 1.8, 95% confidence interval [CI]: 0.9-3.5, P = 0.10. In the presence of elevated concentrations of dust fungi, respondents who smoked were less likely to report visible mould growth, (OR = 0.4, 95% CI: 0.2-0.7, P = 0.005). CONCLUSIONS: Reported mould, water damage, and mouldy odours were associated with elevated levels of indoor fungi. However, inaccuracy was high and there was evidence of a systematic reporting bias. Future research should concentrate on developing accurate objective measures of exposure to fungi, and then use this information to develop valid questionnaires. Currently, objective measures not questionnaires, are recommended to clarify the health effects of indoor fungi.     

Effects of age, breast density, ethnicity, and estrogen replacement therapy on screening mammographic sensitivity and cancer stage at diagnosis: review of 183,134 screening mammograms in Albuquerque, New Mexico

PURPOSE: To examine how common patient factors affect screening mammographic sensitivity and cancer stage at diagnosis. MATERIALS AND METHODS: The authors used a population-based database of 183,134 screening mammograms and a statewide tumor registry to identify 807 breast cancers detected at screening mammography. RESULTS: Sensitivity varied significantly with ethnicity, use of estrogen replacement therapy, mammographic breast density, and age. Sensitivity was 54% (13 of 24) in women younger than 40 years, 77% (121 of 157) in women aged 40-49 years, 78% (224 of 286) in women aged 50-64 years, and 81% (277 of 340) in women older than 64 years. Sensitivity was 68% (162 of 237) for dense breasts and 85% (302 of 356) for nondense breasts and 74% (180 of 244) in estrogen replacement therapy users and 81% (417 of 513) in nonusers. Sensitivity was most markedly reduced with the combination of dense breasts and estrogen replacement therapy use; there was little difference when only one factor was present. Median cancer size and the percentage of early cancers showed little change with any factors. CONCLUSION: Age is a minor determinant of mammographic sensitivity in women aged 40 years or older. Sensitivity is substantially decreased with the combination of higher breast density and estrogen replacement therapy use. There was not a notable shift in cancer outcomes in the groups with lower mammographic sensitivity. These data do not support different screening recommendations in women aged 40-49 years or in estrogen replacement therapy users.     

Using recurrent neural networks for adaptive communication channelequalization

Nonlinear adaptive filters based on a variety of neural network models have been used successfully for system identification and noise-cancellation in a wide class of applications. An important problem in data communications is that of channel equalization, i.e., the removal of interferences introduced by linear or nonlinear message corrupting mechanisms, so that the originally transmitted symbols can be recovered correctly at the receiver. In this paper we introduce an adaptive recurrent neural network (RNN) based equalizer whose small size and high performance makes it suitable for high-speed channel equalization. We propose RNN based structures for both trained adaptation and blind equalization, and we evaluate their performance via extensive simulations for a variety of signal modulations and communication channel models. It is shown that the RNN equalizers have comparable performance with traditional linear filter based equalizers when the channel interferences are relatively mild, and that they outperform them by several orders of magnitude when either the channel's transfer function has spectral nulls or severe nonlinear distortion is present. In addition, the small-size RNN equalizers, being essentially generalized IIR filters, are shown to outperform multilayer perceptron equalizers of larger computational complexity in linear and nonlinear channel equalization cases.     

SedLog: A shareware program for drawing graphic logs and log data manipulation

SedLog is a free multi-platform software package for creating graphic sediment logs providing an intuitive graphical user interface. The graphic sediment logs generated by SedLog can be exported as PDF, Scalable Vector Graphics (SVG), or JPEG for use by other drawing applications or for publications. Log data can be imported and exported in Comma Separated Values (CSV) format. The logs can also be printed to any paper size the user wants. Zoom In, Zoom Out, Fit page, Fit Height and Fit Width facilities are also provided to enable the user to customise the workspace size.