Non-isothermal degradation kinetics of poly (2,2′-dihydroxybiphenyl)

Catalytic oxidative polymerization of 2,2′-dihydroxybiphenyl (DHBP) was performed by using Schiff base polymer-Cu (II) complex and hydrogen peroxide as catalyst and oxidant, respectively. According to size exclusion chromatography (SEC) analysis, the number-average molecular weight (M _n), weight-average molecular weight (M _w) and polydispersity index (PDI) values of poly (2,2′-dihydroxybiphenyl) (PDHBP) were found to be 37,500, 90,000 g mol⁻¹ and 2.4, respectively. The thermal degradation kinetics was investigated by thermogravimetric analysis in dynamic nitrogen atmosphere at four different heating rates: 5, 10, 15 and 20 °C min⁻¹. The derivative thermogravimetry curves of PDHBP showed that its thermal degradation process had one weight-loss step. The apparent activation energies of thermal decomposition for PDHBP as determined by Tang, Flynn–Wall–Ozawa (FWO), Kissenger–Akahira–Sunose (KAS), Coats–Redfern (CR) and Invariant kinetic parameter (IKP) methods were 109.1, 109.0, 110.0, 108.4 and 109.8 kJ mol⁻¹, respectively. The mechanism function and pre-exponential factor were determined by master plots and Criado–Malek–Ortega method. The most likely decomposition process was a D _n Deceleration type in terms of the CR, master plots and Criado–Malek–Ortega results.     

The Making of Early Republican Ankara

Zeynep Kezer outlines the ascendancy and development of Ankara from an obscure, central Anatolian town into a capital city that was to become the focus of the new nation state. Informed by German architectural and technological expertise, it was executed to rigorous Modernist planning principles and aesthetics, and came to represent in urban form the polarisation of pre-republican and republican Turkey. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of the optimum conditions in the removal of Bomaplex Red CR-L dye from the textile wastewater using O3, H2O2, HCO3- and PAC

Bomaplex Red CR-L textile dye was used in the experimental studies. Taguchi method was applied to determine optimum conditions in the removal of dye from synthetic textile wastewater. After the parameters were determined to remove Bomaplex Red CR-L dye from synthetic textile wastewater, the experimental studies were realized. The chosen experimental parameters and their ranges: HCO3- (mM), 0-39; temperature (degrees C), 18-70; ozone-air flow rate (l min-1), 5-15; the dye concentration (ppm), 200-600; particulate activated carbon (PAC) (g), 0-1.5; H2O2 (mM), 0-0056; pH, 3-12; and treatment time (min), 10-30, respectively. An orthogonal array L18 (2(1)x3(7)) for experimental plan and the smaller the better performance statistics formula were selected to define optimum conditions. The optimum conditions were found to be as follows: HCO3- (mM), 0; temperature (degrees C), 70; ozone-air flow rate (l min-1), 10; the dye concentration (ppm), 200; particulate activated carbon (PAC) (g), 1; H2O2 (mM), 0.056; pH, 12; and time (min), 20. Under these optimum conditions, it was determined that the Bomaplex Red CR-L removal efficiency from textile wastewater was 99%.     

Potential Modulated Attenuated Total Reflectance Spectroscopy of Prussian Blue Films on ITO

Potential modulated attenuated total reflectance (PM-ATR) spectroscopy has been employed to study charge transfer processes in Prussian blue (PB) films deposited on indium tin oxide (ITO) electrodes. PM-ATR is a planar waveguide-based spectroelectrochemical technique in which the optical response of an electroactive film is measured as a function of applied potential and modulation frequency. The multiple internal reflection geometry of PM-ATR provides a significant sensitivity advantage over the single external reflectance geometry that has been employed in most prior electroreflectance studies. The apparent electron transfer rate of PB on ITO obtained using PM-ATR was compared to that obtained with conventional cyclic voltammetry; the respective rates, 0.33 ± 0.15 s⁻¹ (n = 3) and 0.71 ± 0.37 s⁻¹ (n = 10), are in good agreement.     

Antibacterial poly{(4‐vinyl phenylboronic acid)‐co‐[2‐(dimethylamino)ethyl methacrylate]} copolymers and their application in water‐based paints

Herein, we report the synthesis of poly(4‐vinylphenylboronic acid) (PVPBA) and poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) homopolymers, copolymers, and their methyl, pentyl, and octyl quaternized forms as dopant in water‐based permanent antibacterial paints. Both quaternized and nonquaternized forms of P(VPBA‐co‐DMAEMA) copolymers have reflected higher MIC values relative to PDMAEMA homopolymers. High molecular weight copolymers were more active against Escherichia coli ATCC 25922, contrarily, lower molecular weight copolymers showed higher antibacterial activity against Staphylococcus aureus ATCC 25923. The paint films prepared with quaternized PDMAEMA homopolymers with a weight of 10% showed better antibacterial activity in water and airborne tests than the copolymers. However, it has been shown that the inadequate anti‐biofilm properties of homopolymer‐containing paint films are overcome with the VPBA content of the copolymer structure and the most effective antibacterial and anti‐biofilm properties have been obtained with paint films containing P(VPBA‐co‐5QDMAEMA) copolymers. These paint films, which can maintain antibacterial and anti‐biofilm properties for at least 1 year, have the potential to be an alternative to Ag/Cl based solid surfaces which require the active substance to be regenerated. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46245.     

Effect of ceramic surface treatments on the bond strength of different composite resins

This study was aimed to observe the relationship between the different surface treatments and the bond strength of both composite based adhesive cement and zirconia ceramic. Thirty-two zirconia ceramic discs were fabricated by following the instructions of manufacturer (5 × 5 × 1.5 mm). Four subgroups were obtained from the specimens according to the specified surface treatments respectively: (a) C: control groups: no treatment; (b) SB: sandblasting with 125 μm aluminum oxide particles for 10 s; (c) SC: silica coating for 10 s; (d) Nd :YAG laser . The composite resin specimens Panavia F and Clearfil SA were introduced and polymerized to the treated bonding areas. Afterwards the specimens were stored in distilled water at 37 °C during 24 h, and the shear test was applied. The data were statistically analyzed by ANOVA and Duncan tests. The bond strength was stated significantly higher in silica coating/Panavia F group (23.35 MPa). The lowest bond strength was stated in control groups cemented with Clearfil SA (12.25 MPa). As a result it was determined that the bond strength has affected the both surface treatments and cement types (p < 0.001). The silica coating –treated zirconia ceramic recorded a significant increase in mean bond strength values.