Simultaneous growth of self-patterned carbon nanotube forests with dual height scales

In this study, we report on a unique, one-step fabrication technique enabling the simultaneous synthesis of vertically aligned multi-walled carbon nanotubes (VA-MWCNTs) with dual height scales through alcohol catalyzed chemical vapor deposition (ACCVD). Regions of VA-MWCNTs with different heights were well separated from each other leading to a self-patterning on the surface. We devised a unique layer-by-layer process for application of catalyst and inhibitor precursors on oxidized Si (100) surfaces before the ACCVD step to achieve a hierarchical arrangement. Patterning could be controlled by adjusting the molarity and application sequence of precursors. Contact angle measurements on these self-patterned surfaces indicated that manipulation of these hierarchical arrays resulted in a wide range of hydrophobic behavior changing from that of a sticky rose petal to a lotus leaf.     

Forming of Protein Bubbles and Porous Films Using Co‐Axial Electrohydrodynamic Flow Processing

Air and 5 wt.‐% BSA solution are used as a model system to generate protein‐coated microbubbles, which are significantly smaller in diameter than the processing needle apertures. The effects of processing parameters (applied voltage and flow rate) on the bubble size distribution and stability are studied. The optimal processing conditions are also explored in terms of heating of the solutions and prepared structures. Both individual microbubbles and porous films were successfully prepared using this method which has significant potential for the preparation of microbubbles for drug delivery systems, porous coatings, thin films, scaffolds and ultrasound contrast agents. The versatile nature of the method implies that many macromolecules and other active agents can be used.

     

Assessment of the Axial Load Response of an H Pile Driven in Multilayered Soil

Most of the current design methods for driven piles were developed for closed-ended pipe piles driven in either pure clay or clean sand. These methods are sometimes used for H piles as well, even though the axial load response of H piles is different from that of pipe piles. Furthermore, in reality, soil profiles often consist of multiple layers of soils that may contain sand, clay, silt or a mixture of these three particle sizes. Therefore, accurate prediction of the ultimate bearing capacity of H piles driven in a mixed soil is very challenging. In addition, although results of well documented load tests on pipe piles are available, the literature contains limited information on the design of H piles. Most of the current design methods for driven piles do not provide specific recommendations for H piles. In order to evaluate the static load response of an H pile, fully instrumented axial load tests were performed on an H pile (HP?310×110) driven into a multilayered soil profile consisting of soils composed of various amounts of clay, silt and sand. The base of the H pile was embedded in a very dense nonplastic silt layer overlying a clay layer. This paper presents the results of the laboratory tests performed to characterize the soil profile and of the pile load tests. It also compares the measured pile resistances with those predicted with soil property- and in situ test-based methods.     

The use of basalt powder as a natural heterogeneous catalyst in the Fenton and Photo-Fenton oxidation of cationic dyes

The use of naturally present heterogeneous catalysts has recently been an essential issue in the Fenton and photo-Fenton processes. In this study, the uses of basalt as a catalyst for the Fenton and photo-Fenton reactions for methylene Blue (MB) and Basic Red 18 (BR18) degradations were investigated. Basalt was selected because of the presence of the iron (III) oxide in the structure. Basalt was characterized by X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) analysis to obtain the chemical composition and the crystalline phase. The surface charge and the surface area were obtained by zeta potential and Brunauer Emmett-Teller (BET) analysis. Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscope (SEM) were utilized to explore the functional group and the surface morphology. Fenton and photo-Fenton processes were applied to explore the best degradation method. Adsorption was also tested and the adsorption process had minimum removal efficiency (12% for MB and 17% for BR18). The removal efficiencies for MB and BR18 by the Fenton process were 87% and 28%, respectively. The photo-Fenton process had maximum removal efficiency with 100% for MB and 70% for BR18. The optimum conditions were 70 mg/L dye concentration, 5 mM H₂O₂, 1.0 g/L basalt loading and pH 2. Basalt has shown reuse capability as a catalyst for three consecutive cycles.     

A study of digital image analysis on the acrylamide derivative monomers induced apoptosis in rat cerebrum

Nowadays, apoptosis is mostly evaluated visually in histological studies. By using the quantitative digital image analysis, this study aimed to investigate the effect of acrylamide‐based monomers (acrylamide [AAm], methacrylamide [MAAm], N‐isopropylacrylamide [NIPAm]) on the cerebrum tissues in rats, which are the most common water‐soluble monomers in the production of polymeric hydrogels used as biomaterials. The Wistar albino rats weighing ~220–240 g were divided into control and three test groups. The control group received 1 mL of saline, and the test groups received 1 mL of aqueous 50 mg/kg/day intramuscular injection of AAm, MAAm, and NIPAm, respectively. At the end of the experiments, brain tissues of all rats euthanized by intramuscular injection of sodium pentobarbital were removed. Terminal deoxynucleotide transferase dUTP nick and labeling (TUNEL) method was applied to brain tissue sections. The monomers have been shown to cause apoptosis due to oxidative stress in cerebrum tissue. Based on apoptosis by tunneling method, quantitative digital image analysis of cell fragments was performed with Olympus cellSens Dimension 1.15 software, and the number, total count area, selected area, average area, and ROI% values of the fragments were found. In addition, the total area and ROI% values of the fragments increased linearly with increasing the molar mass of monomers from the digital image analysis data. Quantitative digital image analysis can facilitate the monitoring of apoptosis caused by the oxidative stress of monomers used in the production of the biomaterials.     

Production and characterization of carbon-based adsorbents from waste lignocellulosic biomass: their effectiveness in heavy metal removal

Abstract

In this study, hazelnut shell and walnut shell which are the agricultural wastes existent abundantly in many countries were pyrolyzed at different temperatures in the temperature range of 400–700?°C in order to optimize the physicochemical properties of biochars. The biochars with large surface area were used to removal of lead (Pb²⁺) ions, one of the most important heavy metal pollutant, from aqueous solutions. The characterization of raw biomass and also biochars produced by pyrolysis were performed using FT-IR, BET, SEM, partial and elemental analysis techniques. In order to determine the adsorption characteristics of both biochars, batch adsorption experiments were carried out under different experimental conditions. The optimum conditions were determined by investigating the effect of adsorption parameters (initial heavy metal concentration, temperature, adsorbent amount, pH, contact time and mixing speed) for efficient removal of Pb²⁺ ions from aqueous solution. The experimental results were investigated in terms of Langmuir, Freundlich and Temkin isotherm models. Together with the calculated thermodynamic parameters, the adsorption mechanism was tried to be explained. In order to determine the kinetic model of the adsorption process, the experimental data were applied to pseudo first-order, pseudo second-order and intra-particle diffusion model, and the model constants were investigated.     

Electron beam penetration of poly (methyl methacrylate)/colemanite composite irradiated at low earth orbit space radiation environment

Poly (methyl methacrylate) modification by colemanite (CMT) addition has ensured beta shielding improvement. This study has connected with space environmental utilization with Kibo Japanese Experiment Module on International Space Station at low earth orbit. Space environment experiment was performed by using Kibo Experiment Handrail Attachment Mechanism–ExHAM. The changes in beta transmission of the composite were examined (by Sr-90 radioisotope) before and after space environmental utilization and details on beta penetration capacity was examined to protect the equipment (used in aviation and aerospace industries) from space radiation. Beta attenuation variations have indicated composite densification with beta attenuation enhancement after CMT addition.     

Designing effective professional development for technology integration in schools

This study aims to explore the critical factors for effective professional development (PD) activities to support teachers' technology integration and suggests a design model: flipped PD. The following questions are investigated: What are the core features of effective teacher PD, what are the implications of core features in effective technology integration PD, and what are the best practices for designing a flipped PD model for preparing teachers to integrate technology into their classrooms? First, we discuss the core features of effective teacher PD: content focus, active learning, coherence, duration, collective participation, and the role of context. Second, we explore design factors in recent technology integration PD studies: learner centred, relevance and reflection, evidence of student learning, support and follow-up, student voice, and initial implementation with teacher leaders. Finally, we present a discussion of our recommendations for a flipped model for technology integration PD.     

Au/Pt Bimetallic Nanoparticle Decorated Microparticle Hybrid Catalyst System for Heterogeneous Hydrogenation of Styrene

Catalysis Letters - Poly(methacryloyloxy quinoline) microparticles were synthesized and used as reducing and stabilizing agents to prepare Au/Pt bimetallic nanoparticle (NP) decorated microparticle...