弹药内弹道性能检验新方法数学模型的建立

本文对弹药内弹道性能检验的传统方法存在的问题进行了分析,提出了一种新的检验方法,重点对新的检验方法的数学模型的建立过程进行了论述。并对数学模型的精度进行了分析、检验和验证。     

高效液相色谱法测定头孢拉定制剂方法的改进

目的:改进头孢拉定制剂含量测定方法。方法:高效液相色谱条件:以Shim—Pack CLC—ODS(250mm×4.6mm)为色谱柱;柱温为35℃;流动相为水—甲醇—3.86％醋酸钠溶液-4％醋酸溶液(1364:500:30:6);流速为0.8mL·min~(-1);检测波长为254nm。结果:头孢拉定峰形良好,分离度和柱效满足药典要求,保留时间由原来的21.32min缩短至8.06min,提高了分析速度,含量测定结果与中国药典无显著差异。结论:该方法快速、准确、能更好地适用于常规检验工作和大批量生产时的质量控制。     

钙钛矿型钛酸锶的制备、结构与性能

钛酸锶是一种具有重要电性质的陶瓷材料 ,因而在工业上得到了广泛的应用。本文介绍了钛酸锶的几种常见的合成方法 ,并简要的介绍了钛酸锶的结构与性能     

油田放射性作业人员外周血淋巴细胞染色体畸变的观察

本文调查了油田212例受γ射线和中子混合辐射照射的作业人员和30例正常人的外周血淋巴细胞染色体畸变。作业人员受γ射线照射的人均年受照剂量为1.28mGy。调查结果表明,放射性测井人员与正常人相比染色体畸变率有显著差异。     

Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor

~~Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor     

论直流电动机换向火花的检测与调整

本文着重探讨直流电动机换向火花的形成、征状以及使用的一些对其进行判别、调整的简单方法，并阐述其原理及效果。     

Electromagnetic properties of ferroelectric-ferrite ceramic composites

The NiFe₂O₄ and Pb(Zr_0.52Ti_0.48)O₃ ceramic composites are prepared by conventional solid state reaction method. The microstructural and morphological properties of the composites are studied by X-ray diffraction analysis and scanning electron microscopy. Results indicate that the ferrite and piezoelectric phases can co-exist in the composites. The relationship between the dielectric constant and frequency (40 Hz–40 MHz) as well as temperature is also investigated. It is noted that the transition temperature of the composites is about 380 °C. A double electric hysteresis loop is observed in our composites. The magnetic properties are relatively weak according to the magnetic hysteresis loop. With increase in the content of the ferrite phase, the permeability increases. The electromagnetic properties of the as-prepared composites are tunable according to the content of the NiFe₂O₄ phase.     

双柱塞砂浆泵中工作机构的设计和仿真研究

本文介绍了双柱塞砂浆泵的工作原理，根据机构替代原理建立起双柱塞砂浆泵工作机构的运动分析模型，然后在MatLab环境下，详细介绍了工作凸轮曲线的设计程序，利用计算机设计程序可以方便地分析工作缸活塞以及工作凸轮机构的位移、速度、加速度，利用SIMULINK仿真工具箱进行运动学仿真，为工作机构设计提供相应的理论分析依据。     

Studies of substrate specificities of lipases from different sources

Although lipases are widely applied in a wide variety of reactions, available information on the factors that are responsible for the substrate specificities of lipases from different sources is scarce. In this paper, nine lipase‐producing microorganism strains were isolated from oil‐containing samples. The properties of these enzymes, including pH optima, temperature optima, thermal stability, and pH stability, vary significantly with the different sources from which these lipases were isolated. The substrate specificities of the nine lipases, including fatty acid and positional specificities, were also studied. The fatty acid specificities of the nine lipases were observably different toward 15 substrates with different carbon chain lengths, different saturation degrees and different side chains. The lipases from S₃ Penicillium citrinum (PCL), MJ₁ Aspergillus niger (ANL), MJ₂ Aspergillus oryzae (AOL), YM Bacillus coughing (BCL), S₉ Geotrichum candidum (GCL), and S₁₁ Candida lypolytica (CLL) showed the strongest specificities to short‐chain esters, and the other lipases showed strong selectivity for medium‐ or long‐chain and branched esters. The positional specificities were examined by analyzing the hydrolytic products of triolein catalyzed by the nine lipases, using TLC. The lipases can be mainly classified into two groups by their specificities for the ester bond at position 2 of triglycerides; one group can selectively hydrolyze the ester bond at position 2 of the triglycerides, the other group cannot. All these nine lipases were divided into four groups by hierarchical clustering analysis on the basis of the results of fatty acid and positional specificities.