Particle distribution and interfacial reactions of Al–7%Si–10%B<Subscript>4</Subscript>C die casting composite

Aluminum–boron carbide particle reinforced composite is an advanced material which can be used in applications such as neutron-shielding components, aircraft, and aerospace structures. In the microstructural characterization of an Al–7%Si–10%B₄C die casting, attention is particularly focused on particle distribution and interface reaction products between B₄C particles and the aluminum matrix. The quantitative analysis results show that, in a cross-section of the cast part, more particles concentrate in the center and fewer particles are present in the wall regions. Moreover, some particle segregation bands have been observed. The mechanisms of the particle migration are proposed to describe the phenomenon. However, the average particle fraction in any cross-section of the cast part is almost the same. A barrier layer consisting of several sublayers was detected on the surface of B₄C particles. Using electron diffraction in selected areas, it is found that these sublayers are composed of Al₃BC crystals, TiB₂ crystals, Si crystals, and coarse stick-shaped TiB₂ particles. In addition, it is observed that Si plays an important role in the formation of a dense barrier layer. The barrier layer can limit B₄C decomposition and improve B₄C stability in the aluminum melt.     

不同品种甜菜类型甜菜光合特性的研究

水文研究了甜菜生育期中不同品种类型甜菜的光合特性，结果表明在生育前期，高糖型品种的叶绿素含量高，而生育中前期以丰产型高，标准型介于二者之间，ＲｕＢＰ竣化酶活性的动态变化亦显这种趋势；在叶丛形成期和块根增长期，丰产型品种光合速度最高，在糖分积累期则以高糖型品种光合速度高；不同品种不同叶位的叶绿素含量与光合速率中呈正相关。     

2—叠氮—1萘醌—5—磺酸生产工艺优化

研究以L-酸为原料,对合成用于制作PS版的2-叠氮1-萘醌-5-磺酸的亚硝化、还原及重氮化三步生产工艺进行最佳配比选优试验。结果表明对L-酸的总收率可达73-75％.获得了较高的收率。     

流延热释电厚膜陶瓷制备单元红外探测器

本文报道采用流延法制备的热释电厚膜陶瓷材料直接装配的单元红外探测器，该方法大大简化了目前探测器的制备工艺，极大地提高了材料的利用率，器件的性能也达到了目前探测器的水平。     

Robust control of nonlinear uncertain systems without generalizedmatching conditions

A novel procedure, called recursive-interlacing procedure, is proposed for designing globally stabilizing robust control. The procedure introduces new interlacing steps and combines them with the existing recursive or backstepping design. It is shown by examining all possible third-order vector systems that the procedure is applicable to systems not satisfying any of the existing structural conditions, that is, to systems in which uncertainties are potentially anywhere and of any bounding function. By its nature, the procedure is not limited to systems of any specific order; it either produces stabilizing control or reveals certain measure of unstabilizability, and it includes recursive design as a special case     

Synthesis of Iron-Based Laves Phase Containing Praseodymium Magnetostrictive Materials

The synthesis and magnetostriction of PrxTb1-x.Fe2, PrxTb1-x Fe2BO2 and PrxTb1-x（Fe0.6Co0.4）2 alloys were investigated in this study. The addition of boron or cobalt atom in PrxTb1-xFe2 could effectively prevent the formation of non-cubic phases, and Pr concentration limit was successfully increased from 0.2 to 0.4. X-ray step scanning for the PrxTb1-xFe2BO2 and PrxTb1-x（Fe0.6Co0.4）2 alloys showed that PrFe2 possessed a large spontaneous magnetostriction λ1111.     

收尽铁路油槽车底油的措施

介绍了造成铁路油槽车底油收不尽的原因，一是节约意识差；二是设备设施陈旧或维护不够；三是操作不当。提出了增强节约意识，挖掘设备潜力，采用合理的吸油方法的对策。     

激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

CAN总线技术在贮煤筒仓安全监测系统中的应用

本文给出了一种基于CAN总线的贮煤筒仓安全监测系统的设计与应用，介绍了CAN总线系统的基本工作原理，并对系统的整体结构、硬件配置、软件功能及各节点功能分别作了说明。实验表明，该系统具有结构简单、可靠性高、安全性好、性能价格比高等特点，对实现目前火电厂贮煤筒仓安全监测系统本质安全化运行有一定的参考意义。