不同表面预处理对有机电致发光显示器性能的影响

从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。     

一种新的解映射算法的推导和实现

本文在一种16QAM,64QAM,256QAM的解映射算法启发下,提出了新的适合32QAM和128QAM的解映射算法,并在此基础上,给出了适合DVB-C接收机的多QAM解映射结构.然后在FPGA中实现和仿真.最后通过比较说明,相对于传统的查找表解映射方法,提出的解映射算法可以明显减少资源使用率.     

单片集成式氮化镓基发光二极管的设计与制造

We report a new monolithic structure of GaN-based light-emitting diode(LED) which can be operated under high voltage or alternative current. Differing from the conventional single LED chip, the monolithic lightemitting diode(MLED) array contains microchips which are interconnected in series or parallel. The key chip fabrication processing methods of the monolithic LED array include deep dry etching, sidewall insulated protection, and electrode interconnection. A 12 V GaN-based blue high voltage light emitting diode was designed and fabricated in our experiment. The forward current-voltage characteristics of MLEDs were consistent with those of conventional single junction light emitting diodes.     

基于偏振度椭球的PMD补偿方法的研究

分析了PMD椭球的三个轴随PMD的变化规律,建立了以偏振度椭球的短轴作为PMD补偿的反馈信号的PMD补偿系统模型,并通过数值模拟对一阶和二阶PMD进行了补偿,结果表明采用这种方法能同时有效地补偿一阶及二阶PMD。     

汽车用厚膜电路

概述了国内外汽车电子的现状和市场前景，近十余年来，汽车电子产品在整车中的比重不断上升。厚膜混合集成电路在汽车严酷部位和恶劣环境下运行中具有很好的适应性，为此，作者提出了发展我国汽车用厚膜电路的建议。     

硅片键合界面的吸杂效应

本文对硅片直接键合界面的吸杂效应进行了研究，根据键合界面存在晶格缺陷、氧沉积物和微缺陷等事实，提出了键盒介面的吸杂试验，分析了其吸杂效应的机理，给出了吸杂方程。理论计算和实验结果得到了较好的吻合。     

智能工作站主机的MMPIS实验模型研究──一个全互连式结构MMPIS硬件环境的设计与实现

本文介绍中日国际合作开发研究的Ａ１型智能网（Ａ１型ＩＮ）智能工作站（ＩＷ）主机的并行推理硬件结构的实验模型设计与实现，给出了一种并行推理硬件支持环境实现方案和该方案在实现中若干问题的解决方法。     

LD泵浦高效多波长激光晶体：掺钕钨酸钾钆

本文综述了掺钕钨酸钾钆Ｎｄ＾３＋＂ＫＧｄ（ＷＯ４）２晶体制近况，介绍了其晶体结构，光谱特。Ｎｄ２ＫＧＷ晶体具有掺杂浓度高、泵浦阀值低，激光转移效率高的特性；强而宽的吸收谱线使该晶体适用于 二极管泵浦而无需温度控制。     

一种新的实时通用视频处理器的设计

实时通用视频处理器是图像处理系统的核心，协调实时通用视频处理器的Ａ／Ｄ，ＤＳＰ，Ｄ／Ａ三者的时序，使ＤＳＰ有更多的时间处理图像数据是设计的关键。在分析国内外文献中提出了逆程和正程工作方式下的视频处理器原理和结构后，又提出一种新的全程工作方式的视频处理器设计方案，并对三种工作方式的电路及工作原理进行了比较。     

New Frontiers on van der Waals Layered Metal Phosphorous Trichalcogenides

The exponentially growing works on 2D materials have resulted in both high scientific interest and huge potential applications in nanocatalysis, optoelectronics, and spintronics. Of especial note is that the newly emerged and promising family of metal phosphorus trichalcogenides (MPX₃) contains semiconductors, metals, and insulators with intriguing layered structures and architectures. The bandgaps of the members in this family range from 1.3 to 3.5 eV, significantly enriching the application of 2D materials in the broad wavelength spectrum. In this review, emphasizing their remarkable structural, physicochemical, and magnetic properties, as well as the numerous applications in various fields, the innovative progress on layered MPX₃ crystals is summarized. Different from other layered materials, these crystals will advance a fascinating frontier in magnetism and spintronic devices with their especially featured atomic layered nanosheets. Thus, their crystal and electronic structures, along with some related researches in magnetism, are discussed in detail. The assortments of growth methods are then summarized. Considering their potential applications, the prominent utilization of these 2D MPX₃ nanoscrystals in catalysis, batteries, and optoelectronics is also discussed. Finally, the outlook of these kinds of layered nanomaterials is provided.