"牺牲"阳极法合成乙醇钽研究

研究了“牺牲“阳极法电化学合成乙醇钽过程中,添加剂种类与浓度、电解液温度、阴阳极极距和电流密度的影响.选取最佳合成条件为:四甲基氯化铵0.04 mol/L,温度为电解液的沸腾温度,极距约2 cm,电流密度220 A/m2.电合成的混合液经常压蒸馏和减压蒸馏,得到产品用红外光谱、拉曼光谱和元素分析进行表征,确定了产品为乙醇钽.电合成的电流效率大于95%,产品蒸馏时钽的直收率82.8%.     

不同增塑体系对丁腈橡胶老化前后及胶管扣压过程性能的影响

本文主要研究了不同增塑体系对丁腈橡胶老化前后物理机械性能的影响,以热油老化后的丁腈橡胶的应力-应变曲线作为材料参数,考察不同增塑体系对丁腈胶管扣压过程中性能变化的影响;硫化特性实验结果表明:使用DOP或DOA作为增塑剂时,硫化胶转矩差值较大,使用液体丁腈或聚硫橡胶作为增塑剂时,转矩差值相对较低,其中使用聚硫橡胶作为增塑剂时,焦烧时间较短;物理机械性能实验结果表明:使用液体丁腈或聚硫橡胶作为增塑剂时,丁腈橡胶硫化胶耐热空气老化性能保持率相对较高,耐热油老化后质量体积变化率相对较低;仿真计算结果表明:使用DOP或DOA作为增塑剂时,静刚度、应变能密度及节点处Mises应力较大,使用液体丁腈或聚硫橡胶作为增塑剂时,静刚度、应变能密度及节点处Mises应力相对较小。     

城市道路混合路由算法研究

针对城市道路中车辆密度突变而导致车联网系统的信息冗余和数据丢失等问题,提出了一种基于贪婪转发（GPSR）和距离矢量转发（AODV）的自适应限制性混合路由算法（ARHP）,以适应网络环境的高速变化。ARHP将通信网络分为贪婪转发、贪婪-距离矢量转发、距离矢量转发3种模式。通过对有效节点密度和网络状态进行实时评估,可实现转发模式间的切换;通过考察链路质量和端到端的时延性能择优选取邻域节点。采用交通模拟器和离散事件模拟器比较ARHP、AODV和GPSR在改变节点密度或车辆速度时的性能表现,结果表明ARHP在数据包的投递率和端到端的时延性能等方面均优于AODV和GPSR。     

稀土元素对钯室温电学性能的影响

研究了稀浓度(0.6at％以下)稀土元素(La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Er、Yb)对钯的室温电学性能的影响。所有稀土元素均提高钯的电阻率(p)、降低电阻温度系数(α),实验结果与理论分析证明(p·α)_((?)d-RE)d=(p·α)_(Pd)。Gd以前的稀土元素降低钯的对铜热电势(ε),其余重稀土元素增大钯的对铜热电势。按0.1at％RE归一化处理的实验数据表明,轻稀土元素对钯电阻率的影响稍大于重稀土,但Ce、Eu、Yb呈反常影响,化合价和尺寸因素是影响电学性能的主要因素。     

A Modal Characterization of λ-Bisimilarity

In order to describe approximate equivalence among processes, a notion of λ-bisimilarity has been introduced in the field of process algebra. In this paper, we provide a modal characterization of λ- bisimilarity without the assumption that the metric is an ultra-metric or λ = 0, which is a generalization of one obtained by [M. Ying, Theoret. Comput.Sci., Vol. 275, 1{68].     

企业文化需要追求个性创新发展

企业文化理论从20世纪80年代提出以来,经过20多年的实践,如今发展快、口号多、落地难,有的演变为企业文化的“作秀”。要提升企业核心竞争力,必须在塑造优秀企业文化中,追求企业个性,避免雷同,求得创新发展。     

Functionalized metal–organic frameworks with strong acidity and hydrophobicity as an efficient catalyst for the production of 5-hydroxymethylfurfural

In the dehydration of fructose to 5-hydroxymethyl furfural(HMF), in situ produced water weakens the acid strength of the catalyst and causes the rehydration of HMF, causing unsatisfactory catalytic activity and selectivity. In this work, a class of benzenesulfonic acid-grafted metal–organic frameworks with strong acidity and hydrophobicity is obtained by the direct sulfonation method using 4-chlorobenzenesulfonic acid as sulfonating agent. The resultant MOFs have a specific surface area of greater than 250 m~2·g~(-1), acid density above 1.0 mmol·g~(-1), and water contact angle up to 129°. The hydrophobic MOF-Ph SO_3 H exhibits both higher catalytic activity and selectivity than MOF-SO_3 H in the HMF synthesis due to its better hydrophobicity and olephilicity. Moreover, the catalyst has a high recycled stability. At last, fructose is completely converted, and 98.0% yield of HMF is obtained under 120 °C in a DMSO solvent system. The successful preparation of the hydrophobic acidic MOF provides a novel hydrophobic catalyst for the synthesis of HMF.     

Isolation and Functional Characterization of a Salt-Responsive Calmodulin-Like Gene MpCML40 from Semi-Mangrove Millettia pinnata

Salt stress is a major increasing threat to global agriculture. Pongamia (Millettia pinnata), a semi-mangrove, is a good model to study the molecular mechanism of plant adaptation to the saline environment. Calcium signaling pathways play critical roles in the model plants such as Arabidopsis in responding to salt stress, but little is known about their function in Pongamia. Here, we have isolated and characterized a salt-responsive MpCML40, a calmodulin-like (CML) gene from Pongamia. MpCML40 protein has 140 amino acids and is homologous with Arabidopsis AtCML40. MpCML40 contains four EF-hand motifs and a bipartite NLS (Nuclear Localization Signal) and localizes both at the plasma membrane and in the nucleus. MpCML40 was highly induced after salt treatment, especially in Pongamia roots. Heterologous expression of MpCML40 in yeast cells improved their salt tolerance. The 35S::MpCML40 transgenic Arabidopsis highly enhanced seed germination rate and root length under salt and osmotic stresses. The transgenic plants had a higher level of proline and a lower level of MDA (malondialdehyde) under normal and stress conditions, which suggested that heterologous expression of MpCML40 contributed to proline accumulation to improve salt tolerance and protect plants from the ROS (reactive oxygen species) destructive effects. Furthermore, we did not observe any measurable discrepancies in the development and growth between the transgenic plants and wild-type plants under normal growth conditions. Our results suggest that MpCML40 is an important positive regulator in response to salt stress and of potential application in producing salt-tolerant crops.     

Hypoxia/Temperature/pH Triple Stimuli–Responsive Block Copolymers: Synthesis,Self-Assembly,and Controlled Drug Release

The amphiphilic block copolymer poly(methacrylic acid-co-2-nitroimidazole acrylate)-b-poly(2-(N,N-dimethylamino)ethyl methacrylate) (P(MAA-co-NIMA)-b-PDMAEMA) with the hypoxia/temperature/pH triple responsiveness is synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT), hydrolysis, and 3-(3-dimethylaminopropyl)-1-ethylcarbodiimide (EDC) reactions, and successfully self-assembled into micelles. The hypoxia response in vitro is realized, and then the sensitivity of the self-assembled micelles to the hypoxia condition is studied by controlling the grafting amount of aminated 2-nitroimidazole. Because 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) is a typical material sensitive to temperature and pH conditions, the self-assembled micelles are also responsive to temperature and different acidic/basic conditions. In addition, the cumulative release rate of doxorubicin (DOX) at 42 °C, pH = 6.0, and hypoxic conditions increases significantly, and verifies the synergistic promotion effect of the above stimulations. This intelligent polymer with triple response mechanism improves the controllability and efficiency of drug release, and is expected to be a drug carrier for cancer treatment.     

Room-Temperature Solid-State Lithium Metal Batteries Using Metal Organic Framework Composited Comb-Like Methoxy Poly(ethylene glycol) Acrylate Solid Polymer Electrolytes

Solid polymer electrolyte with good thermal stability and flexibility is an excellent candidate for solid-state lithium metal batteries, while its low ionic conductivity caused by high crystallinity limits its application at ambient temperature. Here a metal organic framework (zeolitic imidazolate framework-8, ZIF-8) composited comb-like methoxy poly(ethylene glycol) acrylate polymer electrolyte (MCPE) with high ionic conductivity (9.96 × 10⁻⁵ S cm⁻¹ at 30 °C) is prepared by an in situ UV polymerization method. The as-prepared MCPE exhibits improved mechanical property due to the introduction of porous ZIF-8 nanofillers, which is beneficial to suppress the growth of lithium dendrites. Consequently, the LiFePO₄||MCPE||Li cells show a high capacity of 116 mAh g⁻¹ at 30 °C and 0.5 C, and maintain 89.4% of initial capacity after 150 cycles with the average Coulombic efficiency of 99.9%. These results demonstrate that the MCPE shows great potential in solid-state lithium metal batteries near room temperature.